Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS92690PWPR

Texas Instruments · LED Drivers · HTSSOP-16-EP

TPS92690PWPR from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 nDIM input Dual-function input: a resistor divider from VIN sets the UVLO threshold and hysteresis, and a PWM dimming signal can be applied through a diode or MOSFET at the same time.
2 OVP input Connect a resistor divider from the output voltage to set the overvoltage protection threshold and hysteresis.
3 RT output Connect a resistor to AGND to set the base switching frequency.
4 SYNC input External PWM signal sets switching frequency and must be higher than the base frequency set at RT; a falling edge triggers a new on-time at GATE, and tying it to ground selects the internal oscillator.
5 SS/SD input Connect a capacitor to AGND to set the soft-start delay; pull the pin below 75 mV for low-power shutdown.
6 COMP input Connect a ceramic capacitor to GND to set loop compensation.
7 AGND power_in Analog ground; connect to PGND through the DAP exposed thermal pad for a proper ground return path.
8 ILIM input Connect a resistor divider from VREF to set the current limit threshold voltage at the IS pin.
9 VREF power_in Connect to the IADJ pin directly or through a resistor divider, and bypass with a 100-nF ceramic capacitor to AGND.
10 IADJ input Connect a resistor divider from VREF to set the error amplifier reference voltage.
11 CSP input Connect to the positive terminal of the sense resistor in series with the LED stack.
12 PGND power_in Power ground; connect to AGND through the exposed thermal pad for a proper ground return path.
13 GATE output Connect to the gate of the main N-channel MOSFET of the switching converter.
14 IS input Connect to the drain of the main N-channel MOSFET, or to its source if a sense resistor is used for improved accuracy.
15 VCC power_in Bypass with a 2.2-µF ceramic capacitor to provide the bias supply for the controller.
16 VIN power_in Connect to the converter input supply; bypass with a 100-nF ceramic capacitor to AGND as close to the device as possible.
17 Thermal Pad passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-16-EP
Category Nixie Tube Driver/LED Driver
Pins 17

CAD (KiCad official)

  • Symbol: TPS92690PWPR
  • Footprint: Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
  • 3D model files: tps92690pwpr-etched.step / tps92690pwpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps92690pwpr.step / tps92690pwpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 4e9779f40762b2e5, retrieved 2026-10-11, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF