main
Ray
Publish 0.1.0
7925348
TPS92613QNDRRQ1
Texas Instruments · LED Drivers · TO-263-7
TPS92613QNDRRQ1 from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIAGEN | input | Enable pin for LED open-circuit detection to avoid false open diagnostics during low-dropout operation; recommended range 0 to 40 V. |
| 2 | PWM | input | PWM input for current output ON/OFF control; recommended range 0 to 40 V. |
| 3 | FAULT | bidirectional | Fault output supporting a one-fails-all-fail fault bus; recommended range 0 to 7 V, absolute maximum 22 V. |
| 4 | GND | power_in | Ground. |
| 5 | OUT | output | Constant-current output, connect to anode of the top LED in the LED string; recommended range 0 to 40 V. |
| 6 | IN | input | Current input (sense voltage) taken from the supply through the R(SNS) sense resistor; recommended range 4.4 to 40 V. |
| 7 | SUPPLY | power_in | Device supply voltage, recommended range 4.5 to 40 V. |
| 8 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-7 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-voltage input DIAGEN, IN, PWM, SUPPLY | -0.3 | 45 | V | 4 | |||
| High-voltage output OUT | -0.3 | 45 | V | 4 | |||
| Fault bus FAULT | -0.3 | 22 | V | 4 | |||
| IN to OUT | V(IN), V(OUT) | -0.3 | 45 | V | 4 | ||
| SUPPLY to IN | V(SUPPLY), V(IN) | -0.3 | 1 | V | 4 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -40 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | HBM per AEC Q100-002, all pins | 4 | |
| ESD CDM all pins | V(ESD) | -500 | 500 | V | CDM per AEC Q100-011, all pins | 4 | |
| ESD CDM corner pins | V(ESD) | -750 | 750 | V | CDM, corner pins (1 and 7) | 4 | |
| Device supply voltage | SUPPLY | 4.5 | 40 | V | 4 | ||
| Sense voltage | IN | 4.4 | 40 | V | 4 | ||
| PWM inputs | PWM | 0 | 40 | V | 4 | ||
| Diagnostics enable pin | DIAGEN | 0 | 40 | V | 4 | ||
| Driver output | OUT | 0 | 40 | V | 4 | ||
| Fault bus | FAULT | 0 | 7 | V | 4 | ||
| Operating ambient temperature | TA | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 28.4 | °C/W | NDR (TO-263), 7 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 23.1 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 10.1 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 4.2 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 9.9 | °C/W | 4 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 3.5 | °C/W | 4 | |||
| Supply voltage POR rising threshold | V(POR_rising) | 3.2 | 4 | V | 4 | ||
| Supply voltage POR falling threshold | V(POR_falling) | 2.2 | 3 | V | 5 | ||
| Device standby current | I(Quiescent) | 0.1 | 0.2 | 0.25 | mA | PWM = HIGH | 5 |
| Device current in fault mode | I(FAULT) | 0.1 | 0.2 | 0.25 | mA | PWM = HIGH, FAULT externally pulled LOW | 5 |
| Input logic-low voltage, DIAGEN | VIL(DIAGEN) | 1.045 | 1.1 | 1.155 | V | 5 | |
| Input logic-high voltage, DIAGEN | VIH(DIAGEN) | 1.16 | 1.2 | 1.24 | V | 5 | |
| Input logic-low voltage, PWM | VIL(PWM) | 1.045 | 1.1 | 1.155 | V | 5 | |
| Input logic-high voltage, PWM | VIH(PWM) | 1.16 | 1.2 | 1.24 | V | 5 | |
| Device output-current range | I(OUT) | 4 | 600 | mA | 100% duty cycle | 5 | |
| Sense-resistor regulation voltage (25°C) | V(CS_REG) | 94 | 98 | 102 | mV | TA = 25°C, V(SUPPLY) = 4.5 V to 18 V | 5 |
| Sense-resistor regulation voltage (full temp) | V(CS_REG) | 93.5 | 98 | 102.5 | mV | TA = -40°C to +125°C, V(SUPPLY) = 4.5 V to 18 V | 5 |
| Sense-resistor range | R(CS_REG) | 0.16 | 50 | Ω | 5 | ||
| Dropout voltage, 10 mA | V(DROPOUT) | 120 | 150 | mV | V(CS_REG) voltage included, current setting of 10 mA | 5 | |
| Dropout voltage, 70 mA | V(DROPOUT) | 250 | 400 | mV | V(CS_REG) voltage included, current setting of 70 mA | 5 | |
| Dropout voltage, 150 mA | V(DROPOUT) | 430 | 700 | mV | V(CS_REG) voltage included, current setting of 150 mA | 5 | |
| Dropout voltage, 300 mA | V(DROPOUT) | 800 | 1300 | mV | V(CS_REG) voltage included, current setting of 300 mA | 5 | |
| LED open rising threshold | V(OPEN_th_rising) | 235 | 290 | 335 | mV | V(IN), V(OUT) | 5 |
| LED open falling threshold | V(OPEN_th_falling) | 70 | 100 | 135 | mV | V(IN), V(OUT) | 5 |
| Short-to-ground rising threshold | V(SG_th_rising) | 1.14 | 1.2 | 1.26 | V | Channel output V(OUT) | 5 |
| Short-to-ground falling threshold | V(SG_th_falling) | 0.82 | 0.865 | 0.91 | V | Channel output V(OUT) | 5 |
| Short-to-ground retry current | I(Retry) | 0.64 | 1.08 | 1.528 | mA | Channel output V(OUT) | 5 |
| FAULT logic input low threshold | VIL(FAULT) | 0.7 | V | 5 | |||
| FAULT logic input high threshold | VIH(FAULT) | 2 | V | 5 | |||
| FAULT logic output low threshold | VOL(FAULT) | 0.4 | V | With 500-µA external pullup | 5 | ||
| FAULT logic output high threshold | VOH(FAULT) | 5 | 7 | V | With 1-µA external pulldown, V(SUPPLY) = 12 V | 5 | |
| FAULT internal pulldown current | I(FAULT_pulldown) | 500 | 750 | 1000 | µA | 5 | |
| FAULT internal pullup current | I(FAULT_pullup) | 5 | 8 | 12 | µA | 5 | |
| Thermal shutdown junction temperature threshold | T(TSD) | 157 | 172 | 187 | °C | 5 | |
| Thermal shutdown hysteresis | T(TSD_HYS) | 15 | °C | 5 | |||
| PWM rising edge delay | t(PWM_delay_rising) | 10 | 17 | 25 | µs | 50% PWM voltage to 10% of output current closed loop, t2 - t1 | 5 |
| PWM falling edge delay | t(PWM_delay_falling) | 15 | 21 | 30 | µs | 50% PWM voltage to 90% of output current open loop, t5 - t4 | 5 |
| Device startup time | t(DEVICE_STARTUP) | 100 | 150 | µs | SUPPLY rising edge to 10% output current at 200-mA set current and 14 V, t8 - t7 | 5 | |
| LED-open fault-deglitch time | t(OPEN_deg) | 80 | 125 | 175 | µs | 5 | |
| Output short-to-ground detection deglitch time | t(SG_deg) | 80 | 125 | 175 | µs | 5 | |
| Thermal over temperature deglitch timer | t(TSD_deg) | 50 | µs | 5 | |||
| Fault recovery deglitch timer | t(Recover_deg) | 8.5 | 16 | 25 | µs | 5 |
CAD (KiCad official)
- Symbol:
TPS92613QNDRRQ1 - Footprint:
Package_TO_SOT_SMD:TO-263-7_TabPin8 - 3D model: TO-263-7 (KiCad packages3D, STEP)
- 3D model files:
tps92613qndrrq1-etched.step/tps92613qndrrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps92613qndrrq1.step/tps92613qndrrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
e7db8c3a36dee60d, retrieved 2026-10-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS92613QNDRRQ1
**Texas Instruments** · LED Drivers · TO-263-7
TPS92613QNDRRQ1 from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIAGEN | input | Enable pin for LED open-circuit detection to avoid false open diagnostics during low-dropout operation; recommended range 0 to 40 V. |
| 2 | PWM | input | PWM input for current output ON/OFF control; recommended range 0 to 40 V. |
| 3 | FAULT | bidirectional | Fault output supporting a one-fails-all-fail fault bus; recommended range 0 to 7 V, absolute maximum 22 V. |
| 4 | GND | power_in | Ground. |
| 5 | OUT | output | Constant-current output, connect to anode of the top LED in the LED string; recommended range 0 to 40 V. |
| 6 | IN | input | Current input (sense voltage) taken from the supply through the R(SNS) sense resistor; recommended range 4.4 to 40 V. |
| 7 | SUPPLY | power_in | Device supply voltage, recommended range 4.5 to 40 V. |
| 8 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-7 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-voltage input DIAGEN, IN, PWM, SUPPLY | | -0.3 | | 45 | V | | 4 |
| High-voltage output OUT | | -0.3 | | 45 | V | | 4 |
| Fault bus FAULT | | -0.3 | | 22 | V | | 4 |
| IN to OUT | V(IN), V(OUT) | -0.3 | | 45 | V | | 4 |
| SUPPLY to IN | V(SUPPLY), V(IN) | -0.3 | | 1 | V | | 4 |
| Operating junction temperature | TJ | -40 | | 150 | °C | | 4 |
| Storage temperature | Tstg | -40 | | 150 | °C | | 4 |
| ESD HBM | V(ESD) | -2000 | | 2000 | V | HBM per AEC Q100-002, all pins | 4 |
| ESD CDM all pins | V(ESD) | -500 | | 500 | V | CDM per AEC Q100-011, all pins | 4 |
| ESD CDM corner pins | V(ESD) | -750 | | 750 | V | CDM, corner pins (1 and 7) | 4 |
| Device supply voltage | SUPPLY | 4.5 | | 40 | V | | 4 |
| Sense voltage | IN | 4.4 | | 40 | V | | 4 |
| PWM inputs | PWM | 0 | | 40 | V | | 4 |
| Diagnostics enable pin | DIAGEN | 0 | | 40 | V | | 4 |
| Driver output | OUT | 0 | | 40 | V | | 4 |
| Fault bus | FAULT | 0 | | 7 | V | | 4 |
| Operating ambient temperature | TA | -40 | | 125 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 28.4 | | °C/W | NDR (TO-263), 7 pins | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 23.1 | | °C/W | | 4 |
| Junction-to-board thermal resistance | RθJB | | 10.1 | | °C/W | | 4 |
| Junction-to-top characterization parameter | ψJT | | 4.2 | | °C/W | | 4 |
| Junction-to-board characterization parameter | ψJB | | 9.9 | | °C/W | | 4 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 3.5 | | °C/W | | 4 |
| Supply voltage POR rising threshold | V(POR_rising) | | 3.2 | 4 | V | | 4 |
| Supply voltage POR falling threshold | V(POR_falling) | | 2.2 | 3 | V | | 5 |
| Device standby current | I(Quiescent) | 0.1 | 0.2 | 0.25 | mA | PWM = HIGH | 5 |
| Device current in fault mode | I(FAULT) | 0.1 | 0.2 | 0.25 | mA | PWM = HIGH, FAULT externally pulled LOW | 5 |
| Input logic-low voltage, DIAGEN | VIL(DIAGEN) | 1.045 | 1.1 | 1.155 | V | | 5 |
| Input logic-high voltage, DIAGEN | VIH(DIAGEN) | 1.16 | 1.2 | 1.24 | V | | 5 |
| Input logic-low voltage, PWM | VIL(PWM) | 1.045 | 1.1 | 1.155 | V | | 5 |
| Input logic-high voltage, PWM | VIH(PWM) | 1.16 | 1.2 | 1.24 | V | | 5 |
| Device output-current range | I(OUT) | 4 | | 600 | mA | 100% duty cycle | 5 |
| Sense-resistor regulation voltage (25°C) | V(CS_REG) | 94 | 98 | 102 | mV | TA = 25°C, V(SUPPLY) = 4.5 V to 18 V | 5 |
| Sense-resistor regulation voltage (full temp) | V(CS_REG) | 93.5 | 98 | 102.5 | mV | TA = -40°C to +125°C, V(SUPPLY) = 4.5 V to 18 V | 5 |
| Sense-resistor range | R(CS_REG) | 0.16 | | 50 | Ω | | 5 |
| Dropout voltage, 10 mA | V(DROPOUT) | | 120 | 150 | mV | V(CS_REG) voltage included, current setting of 10 mA | 5 |
| Dropout voltage, 70 mA | V(DROPOUT) | | 250 | 400 | mV | V(CS_REG) voltage included, current setting of 70 mA | 5 |
| Dropout voltage, 150 mA | V(DROPOUT) | | 430 | 700 | mV | V(CS_REG) voltage included, current setting of 150 mA | 5 |
| Dropout voltage, 300 mA | V(DROPOUT) | | 800 | 1300 | mV | V(CS_REG) voltage included, current setting of 300 mA | 5 |
| LED open rising threshold | V(OPEN_th_rising) | 235 | 290 | 335 | mV | V(IN), V(OUT) | 5 |
| LED open falling threshold | V(OPEN_th_falling) | 70 | 100 | 135 | mV | V(IN), V(OUT) | 5 |
| Short-to-ground rising threshold | V(SG_th_rising) | 1.14 | 1.2 | 1.26 | V | Channel output V(OUT) | 5 |
| Short-to-ground falling threshold | V(SG_th_falling) | 0.82 | 0.865 | 0.91 | V | Channel output V(OUT) | 5 |
| Short-to-ground retry current | I(Retry) | 0.64 | 1.08 | 1.528 | mA | Channel output V(OUT) | 5 |
| FAULT logic input low threshold | VIL(FAULT) | | | 0.7 | V | | 5 |
| FAULT logic input high threshold | VIH(FAULT) | 2 | | | V | | 5 |
| FAULT logic output low threshold | VOL(FAULT) | | | 0.4 | V | With 500-µA external pullup | 5 |
| FAULT logic output high threshold | VOH(FAULT) | 5 | | 7 | V | With 1-µA external pulldown, V(SUPPLY) = 12 V | 5 |
| FAULT internal pulldown current | I(FAULT_pulldown) | 500 | 750 | 1000 | µA | | 5 |
| FAULT internal pullup current | I(FAULT_pullup) | 5 | 8 | 12 | µA | | 5 |
| Thermal shutdown junction temperature threshold | T(TSD) | 157 | 172 | 187 | °C | | 5 |
| Thermal shutdown hysteresis | T(TSD_HYS) | | 15 | | °C | | 5 |
| PWM rising edge delay | t(PWM_delay_rising) | 10 | 17 | 25 | µs | 50% PWM voltage to 10% of output current closed loop, t2 - t1 | 5 |
| PWM falling edge delay | t(PWM_delay_falling) | 15 | 21 | 30 | µs | 50% PWM voltage to 90% of output current open loop, t5 - t4 | 5 |
| Device startup time | t(DEVICE_STARTUP) | | 100 | 150 | µs | SUPPLY rising edge to 10% output current at 200-mA set current and 14 V, t8 - t7 | 5 |
| LED-open fault-deglitch time | t(OPEN_deg) | 80 | 125 | 175 | µs | | 5 |
| Output short-to-ground detection deglitch time | t(SG_deg) | 80 | 125 | 175 | µs | | 5 |
| Thermal over temperature deglitch timer | t(TSD_deg) | | 50 | | µs | | 5 |
| Fault recovery deglitch timer | t(Recover_deg) | 8.5 | 16 | 25 | µs | | 5 |
## CAD (KiCad official)
- Symbol: `TPS92613QNDRRQ1`
- Footprint: `Package_TO_SOT_SMD:TO-263-7_TabPin8`
- 3D model: TO-263-7 (KiCad packages3D, STEP)
- 3D model files: `tps92613qndrrq1-etched.step` / `tps92613qndrrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps92613qndrrq1.step` / `tps92613qndrrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps92613-q1) (31 pp, sha256 `e7db8c3a36dee60d`, retrieved 2026-10-24, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps92613qndrrq1-datasheet.pdf)