Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS92613QNDRRQ1

Texas Instruments · LED Drivers · TO-263-7

TPS92613QNDRRQ1 from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DIAGEN input Enable pin for LED open-circuit detection to avoid false open diagnostics during low-dropout operation; recommended range 0 to 40 V.
2 PWM input PWM input for current output ON/OFF control; recommended range 0 to 40 V.
3 FAULT bidirectional Fault output supporting a one-fails-all-fail fault bus; recommended range 0 to 7 V, absolute maximum 22 V.
4 GND power_in Ground.
5 OUT output Constant-current output, connect to anode of the top LED in the LED string; recommended range 0 to 40 V.
6 IN input Current input (sense voltage) taken from the supply through the R(SNS) sense resistor; recommended range 4.4 to 40 V.
7 SUPPLY power_in Device supply voltage, recommended range 4.5 to 40 V.
8 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TO-263-7
Category Nixie Tube Driver/LED Driver
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
High-voltage input DIAGEN, IN, PWM, SUPPLY -0.3 45 V 4
High-voltage output OUT -0.3 45 V 4
Fault bus FAULT -0.3 22 V 4
IN to OUT V(IN), V(OUT) -0.3 45 V 4
SUPPLY to IN V(SUPPLY), V(IN) -0.3 1 V 4
Operating junction temperature TJ -40 150 °C 4
Storage temperature Tstg -40 150 °C 4
ESD HBM V(ESD) -2000 2000 V HBM per AEC Q100-002, all pins 4
ESD CDM all pins V(ESD) -500 500 V CDM per AEC Q100-011, all pins 4
ESD CDM corner pins V(ESD) -750 750 V CDM, corner pins (1 and 7) 4
Device supply voltage SUPPLY 4.5 40 V 4
Sense voltage IN 4.4 40 V 4
PWM inputs PWM 0 40 V 4
Diagnostics enable pin DIAGEN 0 40 V 4
Driver output OUT 0 40 V 4
Fault bus FAULT 0 7 V 4
Operating ambient temperature TA -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 28.4 °C/W NDR (TO-263), 7 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 23.1 °C/W 4
Junction-to-board thermal resistance RθJB 10.1 °C/W 4
Junction-to-top characterization parameter ψJT 4.2 °C/W 4
Junction-to-board characterization parameter ψJB 9.9 °C/W 4
Junction-to-case (bottom) thermal resistance RθJC(bot) 3.5 °C/W 4
Supply voltage POR rising threshold V(POR_rising) 3.2 4 V 4
Supply voltage POR falling threshold V(POR_falling) 2.2 3 V 5
Device standby current I(Quiescent) 0.1 0.2 0.25 mA PWM = HIGH 5
Device current in fault mode I(FAULT) 0.1 0.2 0.25 mA PWM = HIGH, FAULT externally pulled LOW 5
Input logic-low voltage, DIAGEN VIL(DIAGEN) 1.045 1.1 1.155 V 5
Input logic-high voltage, DIAGEN VIH(DIAGEN) 1.16 1.2 1.24 V 5
Input logic-low voltage, PWM VIL(PWM) 1.045 1.1 1.155 V 5
Input logic-high voltage, PWM VIH(PWM) 1.16 1.2 1.24 V 5
Device output-current range I(OUT) 4 600 mA 100% duty cycle 5
Sense-resistor regulation voltage (25°C) V(CS_REG) 94 98 102 mV TA = 25°C, V(SUPPLY) = 4.5 V to 18 V 5
Sense-resistor regulation voltage (full temp) V(CS_REG) 93.5 98 102.5 mV TA = -40°C to +125°C, V(SUPPLY) = 4.5 V to 18 V 5
Sense-resistor range R(CS_REG) 0.16 50 Ω 5
Dropout voltage, 10 mA V(DROPOUT) 120 150 mV V(CS_REG) voltage included, current setting of 10 mA 5
Dropout voltage, 70 mA V(DROPOUT) 250 400 mV V(CS_REG) voltage included, current setting of 70 mA 5
Dropout voltage, 150 mA V(DROPOUT) 430 700 mV V(CS_REG) voltage included, current setting of 150 mA 5
Dropout voltage, 300 mA V(DROPOUT) 800 1300 mV V(CS_REG) voltage included, current setting of 300 mA 5
LED open rising threshold V(OPEN_th_rising) 235 290 335 mV V(IN), V(OUT) 5
LED open falling threshold V(OPEN_th_falling) 70 100 135 mV V(IN), V(OUT) 5
Short-to-ground rising threshold V(SG_th_rising) 1.14 1.2 1.26 V Channel output V(OUT) 5
Short-to-ground falling threshold V(SG_th_falling) 0.82 0.865 0.91 V Channel output V(OUT) 5
Short-to-ground retry current I(Retry) 0.64 1.08 1.528 mA Channel output V(OUT) 5
FAULT logic input low threshold VIL(FAULT) 0.7 V 5
FAULT logic input high threshold VIH(FAULT) 2 V 5
FAULT logic output low threshold VOL(FAULT) 0.4 V With 500-µA external pullup 5
FAULT logic output high threshold VOH(FAULT) 5 7 V With 1-µA external pulldown, V(SUPPLY) = 12 V 5
FAULT internal pulldown current I(FAULT_pulldown) 500 750 1000 µA 5
FAULT internal pullup current I(FAULT_pullup) 5 8 12 µA 5
Thermal shutdown junction temperature threshold T(TSD) 157 172 187 °C 5
Thermal shutdown hysteresis T(TSD_HYS) 15 °C 5
PWM rising edge delay t(PWM_delay_rising) 10 17 25 µs 50% PWM voltage to 10% of output current closed loop, t2 - t1 5
PWM falling edge delay t(PWM_delay_falling) 15 21 30 µs 50% PWM voltage to 90% of output current open loop, t5 - t4 5
Device startup time t(DEVICE_STARTUP) 100 150 µs SUPPLY rising edge to 10% output current at 200-mA set current and 14 V, t8 - t7 5
LED-open fault-deglitch time t(OPEN_deg) 80 125 175 µs 5
Output short-to-ground detection deglitch time t(SG_deg) 80 125 175 µs 5
Thermal over temperature deglitch timer t(TSD_deg) 50 µs 5
Fault recovery deglitch timer t(Recover_deg) 8.5 16 25 µs 5

CAD (KiCad official)

  • Symbol: TPS92613QNDRRQ1
  • Footprint: Package_TO_SOT_SMD:TO-263-7_TabPin8
  • 3D model: TO-263-7 (KiCad packages3D, STEP)
  • 3D model files: tps92613qndrrq1-etched.step / tps92613qndrrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps92613qndrrq1.step / tps92613qndrrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 e7db8c3a36dee60d, retrieved 2026-10-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF