component
TPS92513HVDGQT
Public Made by Adomby adom
Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
tps92513hvdgqt: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
69369fe
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212
{
"slug": "tps92513hvdgqt",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"led drivers",
"tps92513hvdgqt",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tps92513hvdgqt.kicad_sym",
"tps92513hvdgqt.kicad_mod",
"tps92513hvdgqt.glb",
"tps92513hvdgqt.step",
"tps92513hvdgqt.lbr",
"docs/hero.png",
"docs/tps92513hvdgqt-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "TPS92513HVDGQT",
"manufacturer": "Texas Instruments",
"package": "MSOP-10-EP",
"pin_count": 11,
"category": "LED Drivers",
"subcategory": "LED Drivers",
"datasheet": "https://www.ti.com/cn/lit/gpn/tps92513hv",
"parts": {
"symbol": "tps92513hvdgqt.kicad_sym",
"footprint": "tps92513hvdgqt.kicad_mod",
"model_3d": "tps92513hvdgqt-etched.glb",
"model_3d_plain": "tps92513hvdgqt.glb",
"model_3d_step": "tps92513hvdgqt-etched.step",
"model_3d_step_plain": "tps92513hvdgqt.step",
"lbr": "tps92513hvdgqt.lbr"
},
"distributor_links": {
"lcsc": "C2678537",
"digikey": "296-42114-2-ND",
"mouser": "595-TPS92513HVDGQT"
},
"distributor_check": {
"checked_at": "2026-09-27T01:36:32Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-42114-2-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-TPS92513HVDGQT",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "BOOT",
"type": "output",
"description": "Bootstrap capacitor supply for high-side MOSFET gate driver; 0.1µF ceramic capacitor required with minimum 2V voltage relative to PH for proper switching operation."
},
{
"number": "2",
"name": "VIN",
"type": "power_in",
"description": "Input supply voltage; operating range 4.5V to 60V for the TPS92513HV variant."
},
{
"number": "3",
"name": "UVLO",
"type": "input",
"description": "Adjustable undervoltage lockout threshold; set using resistor divider from VIN to establish minimum operating voltage with hysteresis."
},
{
"number": "4",
"name": "PDIM",
"type": "input",
"description": "PWM dimming input controlling LED output current with duty cycle range 0% to 100% at 100Hz to 1kHz frequency."
},
{
"number": "5",
"name": "RT/CLK",
"type": "input",
"description": "Switching frequency control via timing resistor to ground for 100kHz to 2MHz range or external clock input for PLL synchronization up to 2MHz."
},
{
"number": "6",
"name": "IADJ",
"type": "input",
"description": "Analog current adjust input with 0V to 1.8V range setting ISENSE voltage through 1:6 divider for LED current adjustment."
},
{
"number": "7",
"name": "ISENSE",
"type": "input",
"description": "Current sense input to error amplifier inverting node regulating LED current with typical setpoint range 0mV to 300mV."
},
{
"number": "8",
"name": "COMP",
"type": "output",
"description": "Error amplifier output requiring external capacitor (0.01µF to 0.1µF to ground) for loop frequency compensation."
},
{
"number": "9",
"name": "GND",
"type": "power_in",
"description": "Ground return; must connect to thermal pad for proper electrical and thermal operation of device."
},
{
"number": "10",
"name": "PH",
"type": "output",
"description": "High-side MOSFET source output switching between VIN and ground at controlled frequency up to 2MHz."
},
{
"number": "11",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-4-6",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Exposed thermal pad (PowerPAD) designated as 'PAD' in datasheet pin configuration table rather than ",
"exposed pad 11 added from the footprint",
"dropped thermal pad ['EP'] absent from footprint"
],
"pages_sent": 29,
"cost_usd": 0.3606,
"at": "2026-09-27T01:36:14"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tps92513hv",
"pages": 29,
"sha256": "d5fcbe22d6bc890f",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 11,
"described": 11,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tps92513hvdgqt.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tps92513hvdgqt-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "b22bba4cd6bba349c2502c4e89a764b00129d25fc262596be4e2807c295b440e",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}