TPS92513HVDGQR

{
  "schema_version": 1,
  "type": "component",
  "slug": "tps92513hvdgqr",
  "title": "TPS92513HVDGQR",
  "brief": "Texas Instruments LED Drivers, HVSSOP-10-EP-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "led drivers",
    "tps92513hvdgqr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS92513HVDGQR",
    "manufacturer": "Texas Instruments",
    "package": "HVSSOP-10-EP-0.5mm",
    "pin_count": 11,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps92513hv",
    "parts": {
      "symbol": "tps92513hvdgqr.kicad_sym",
      "footprint": "tps92513hvdgqr.kicad_mod",
      "model_3d": "tps92513hvdgqr-hero.glb",
      "model_3d_plain": "tps92513hvdgqr.glb",
      "model_3d_step": "tps92513hvdgqr-etched.step",
      "model_3d_step_plain": "tps92513hvdgqr.step",
      "lbr": "tps92513hvdgqr.lbr"
    },
    "distributor_links": {
      "lcsc": 213571,
      "digikey": "296-47304-2-ND",
      "mouser": "595-TPS92513HVDGQR"
    },
    "distributor_check": {
      "checked_at": "2026-10-03T04:18:11Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-47304-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS92513HVDGQR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BOOT",
        "type": "output",
        "description": "A bootstrap capacitor is required between BOOT and PH, and the output is forced to switch off if the capacitor voltage is below the minimum required by the output device."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage with operating range of 4.5V to 42V for TPS92513 or 4.5V to 60V for the HV version."
      },
      {
        "number": "3",
        "name": "UVLO",
        "type": "input",
        "description": "Adjustable undervoltage lockout pin set with a resistor divider from VIN."
      },
      {
        "number": "4",
        "name": "PDIM",
        "type": "input",
        "description": "PWM dimming input pin where the duty cycle of the PWM signal linearly controls the average output current of the converter."
      },
      {
        "number": "5",
        "name": "RT/CLK",
        "type": "input",
        "description": "Resistor timing and external clock input where an internal amplifier holds this pin at a fixed voltage for frequency programming, or becomes a high impedance clock input to the internal PLL when pulled above the PLL upper threshold."
      },
      {
        "number": "6",
        "name": "IADJ",
        "type": "input",
        "description": "Analog current adjust input pin with voltage range of 180 mV to 1.8 V that sets the ISENSE pin voltage equal to the IADJ pin voltage divided by 6."
      },
      {
        "number": "7",
        "name": "ISENSE",
        "type": "input",
        "description": "Inverting node of the transconductance error amplifier."
      },
      {
        "number": "8",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output and input to the output switch current comparator; connect frequency compensation components to this pin."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "10",
        "name": "PH",
        "type": "output",
        "description": "Source of the internal high-side MOSFET."
      },
      {
        "number": "11",
        "name": "PowerPAD",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 11 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 7,
        "cost_usd": 0.1025,
        "at": "2026-10-03T04:17:50"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps92513hv",
        "pages": 29,
        "sha256": "d5fcbe22d6bc890f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HVSSOP-10-EP-0.5mm",
      "Category": "LED Drivers",
      "Pins": "11"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps92513hvdgqr"
  ],
  "discovery_pitch": "TPS92513HVDGQR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps92513hvdgqr.kicad_sym",
    "tps92513hvdgqr.kicad_mod",
    "tps92513hvdgqr.glb",
    "tps92513hvdgqr.step",
    "tps92513hvdgqr.lbr",
    "docs/hero.png",
    "docs/tps92513hvdgqr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps92513hvdgqr-hero.glb",
    "tps92513hvdgqr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}