component
TPS92513HVDGQR
Public Made by Adomby adom
Texas Instruments LED Drivers, HVSSOP-10-EP-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS92513HVDGQR
Texas Instruments · LED Drivers · HVSSOP-10-EP-0.5mm
TPS92513HVDGQR from Texas Instruments, in a HVSSOP-10-EP-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | output | A bootstrap capacitor is required between BOOT and PH, and the output is forced to switch off if the capacitor voltage is below the minimum required by the output device. |
| 2 | VIN | power_in | Input supply voltage with operating range of 4.5V to 42V for TPS92513 or 4.5V to 60V for the HV version. |
| 3 | UVLO | input | Adjustable undervoltage lockout pin set with a resistor divider from VIN. |
| 4 | PDIM | input | PWM dimming input pin where the duty cycle of the PWM signal linearly controls the average output current of the converter. |
| 5 | RT/CLK | input | Resistor timing and external clock input where an internal amplifier holds this pin at a fixed voltage for frequency programming, or becomes a high impedance clock input to the internal PLL when pulled above the PLL upper threshold. |
| 6 | IADJ | input | Analog current adjust input pin with voltage range of 180 mV to 1.8 V that sets the ISENSE pin voltage equal to the IADJ pin voltage divided by 6. |
| 7 | ISENSE | input | Inverting node of the transconductance error amplifier. |
| 8 | COMP | output | Error amplifier output and input to the output switch current comparator; connect frequency compensation components to this pin. |
| 9 | GND | power_in | Ground. |
| 10 | PH | output | Source of the internal high-side MOSFET. |
| 11 | PowerPAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-10-EP-0.5mm |
| Category | LED Drivers |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
TPS92513HVDGQR - Footprint:
Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm - 3D model: HVSSOP-10-EP-0.5mm (KiCad packages3D, STEP)
- 3D model files:
tps92513hvdgqr-etched.step/tps92513hvdgqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps92513hvdgqr.step/tps92513hvdgqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
d5fcbe22d6bc890f, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).