TPS92512HVDGQT

{
  "slug": "tps92512hvdgqt",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "nixie tube driver-led driver",
    "tps92512hvdgqt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps92512hvdgqt.kicad_sym",
    "tps92512hvdgqt.kicad_mod",
    "tps92512hvdgqt.glb",
    "tps92512hvdgqt.step",
    "tps92512hvdgqt.lbr",
    "docs/hero.png",
    "docs/tps92512hvdgqt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps92512hvdgqt-hero.glb",
    "tps92512hvdgqt-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS92512HVDGQT",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-10-EP",
    "pin_count": 11,
    "category": "Nixie Tube Driver/LED Driver",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps92512hv",
    "parts": {
      "symbol": "tps92512hvdgqt.kicad_sym",
      "footprint": "tps92512hvdgqt.kicad_mod",
      "model_3d": "tps92512hvdgqt-hero.glb",
      "model_3d_plain": "tps92512hvdgqt.glb",
      "model_3d_step": "tps92512hvdgqt-etched.step",
      "model_3d_step_plain": "tps92512hvdgqt.step",
      "lbr": "tps92512hvdgqt.lbr"
    },
    "distributor_links": {
      "lcsc": "C2678896",
      "digikey": "296-39638-2-ND",
      "mouser": "595-TPS92512HVDGQT"
    },
    "distributor_check": {
      "checked_at": "2026-10-07T01:26:39Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-39638-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS92512HVDGQT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BOOT",
        "type": "output",
        "description": "Bootstrap capacitor connection; a capacitor is required between BOOT and PH, and the output switches off if the voltage is below the minimum required by the output device."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage from 4.5V to 42V for TPS92512 or 4.5V to 60V for TPS92512HV."
      },
      {
        "number": "3",
        "name": "UVLO",
        "type": "input",
        "description": "Adjustable undervoltage lockout input set with resistor divider from VIN."
      },
      {
        "number": "4",
        "name": "PDIM",
        "type": "input",
        "description": "PWM dimming input pin where the duty cycle of the PWM signal linearly controls the average output current."
      },
      {
        "number": "5",
        "name": "RT/CLK",
        "type": "input",
        "description": "Resistor timing or external clock input; operates with external resistor to ground for frequency programming, or with external clock input to the PLL when pulled above the PLL upper threshold."
      },
      {
        "number": "6",
        "name": "IADJ",
        "type": "input",
        "description": "Analog current adjust input accepting 180 mV to 1.8 V to set the ISENSE pin voltage, with ISENSE voltage equal to IADJ voltage divided by 6."
      },
      {
        "number": "7",
        "name": "ISENSE",
        "type": "input",
        "description": "Inverting node of the transconductance error amplifier."
      },
      {
        "number": "8",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output and output switch current comparator input; connect frequency compensation components to this pin."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; must be electrically connected to the exposed pad beneath the device for proper operation."
      },
      {
        "number": "10",
        "name": "PH",
        "type": "output",
        "description": "Output source of the internal high-side MOSFET."
      },
      {
        "number": "11",
        "name": "PowerPAD",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 11 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 7,
        "cost_usd": 0.1071,
        "at": "2026-10-07T01:26:23"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps92512hv",
        "pages": 31,
        "sha256": "edc25dbe824cefa7",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps92512hvdgqt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps92512hvdgqt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5aafb5c7bfa58b5d7c452e26a52371756e571b1f93844154d295cfbbb7fcba15",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}