component
TPS92512HVDGQT
Public Made by Adomby adom
Texas Instruments LED Drivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS92512HVDGQT
Texas Instruments · LED Drivers · MSOP-10-EP
TPS92512HVDGQT from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | output | Bootstrap capacitor connection; a capacitor is required between BOOT and PH, and the output switches off if the voltage is below the minimum required by the output device. |
| 2 | VIN | power_in | Input supply voltage from 4.5V to 42V for TPS92512 or 4.5V to 60V for TPS92512HV. |
| 3 | UVLO | input | Adjustable undervoltage lockout input set with resistor divider from VIN. |
| 4 | PDIM | input | PWM dimming input pin where the duty cycle of the PWM signal linearly controls the average output current. |
| 5 | RT/CLK | input | Resistor timing or external clock input; operates with external resistor to ground for frequency programming, or with external clock input to the PLL when pulled above the PLL upper threshold. |
| 6 | IADJ | input | Analog current adjust input accepting 180 mV to 1.8 V to set the ISENSE pin voltage, with ISENSE voltage equal to IADJ voltage divided by 6. |
| 7 | ISENSE | input | Inverting node of the transconductance error amplifier. |
| 8 | COMP | output | Error amplifier output and output switch current comparator input; connect frequency compensation components to this pin. |
| 9 | GND | power_in | Ground; must be electrically connected to the exposed pad beneath the device for proper operation. |
| 10 | PH | output | Output source of the internal high-side MOSFET. |
| 11 | PowerPAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10-EP |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
TPS92512HVDGQT - Footprint:
Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm - 3D model: MSOP-10-EP (KiCad packages3D, STEP)
- 3D model files:
tps92512hvdgqt-etched.step/tps92512hvdgqt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps92512hvdgqt.step/tps92512hvdgqt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
edc25dbe824cefa7, retrieved 2026-10-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).