main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps92390rhbr: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md tps92390rhbr: one-pass backfill (citation: stored_copy) · Ray
tps92390rhbr-etched.glb Publish 0.1.0 · Ray
tps92390rhbr-etched.step tps92390rhbr: factory component page (tier=mfr) · Ray
tps92390rhbr-hero.glb tps92390rhbr: hero GLB from the etched model (keeps the MPN mark) · Ray
tps92390rhbr-hero.overlay.json Publish 0.1.0 · Ray
tps92390rhbr.glb Publish 0.1.0 · Ray
tps92390rhbr.kicad_mod Publish 0.1.0 · Ray
tps92390rhbr.kicad_sym Publish 0.1.0 · Ray
tps92390rhbr.lbr Publish 0.1.0 · Ray
tps92390rhbr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 33 pins · Ray

TPS92390RHBR

Texas Instruments · LED Drivers · QFN-32-EP(5x5)

TPS92390RHBR from Texas Instruments, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LED_GND power_in Analog LED ground connection.
2 LED_GND power_in Analog LED ground connection.
3 OUT4 passive Analog LED current sink output 4 (-0.3 to 52 V abs max); tie to ground if unused.
4 LED_GND power_in LED ground connection.
5 OUT3 passive Analog LED current sink output 3 (-0.3 to 52 V abs max); tie to ground if unused.
6 OUT2 passive Analog LED current sink output 2 (-0.3 to 52 V abs max); tie to ground if unused.
7 OUT1 passive Analog LED current sink output 1 (-0.3 to 52 V abs max); tie to ground if unused.
8 INT output Device fault interrupt output, open drain; a 10-kΩ pullup resistor is recommended.
9 SDA bidirectional SDA for I2C interface; a 10-kΩ pullup resistor is recommended.
10 SCL input SCL for I2C interface; a 10-kΩ pullup resistor is recommended.
11 BST_SYNC input Input for synchronizing boost; when unused connect to ground to disable spread spectrum or to VDD to enable spread spectrum.
12 PWM input PWM input for brightness control; tie to GND if unused.
13 SGND power_in Signal ground.
14 LED_SET passive LED string configuration through external resistor; do not leave floating.
15 PWM_FSET passive LED dimming frequency setup through external resistor; do not leave floating.
16 BST_FSET passive Boost switching frequency setup through external resistor; do not leave floating.
17 MODE passive Dimming mode setup through external resistor; do not leave floating.
18 UVLO input Input voltage sense for programming the input UVLO threshold through an external resistor to VIN.
19 VSENSE_P input Input voltage detection for OVP protection and positive input for input current sense (3 to 48 V recommended).
20 VSENSE_N input Negative input for input current sense; tie to VSENSE_P if input current sense is not used.
21 SD output Power line FET control, open-drain output; leave floating if unused.
22 VDD power_in Power supply input for internal analog and digital circuits (3 to 5.5 V); connect a 10-µF capacitor to GND.
23 EN input Enable input.
24 C1N passive Negative input for charge pump flying capacitor; leave floating if feature not used.
25 C1P passive Positive input for charge pump flying capacitor; leave floating if feature not used.
26 CPUMP power_out Charge pump output; connect to VDD if charge pump is not used, and a 4.7-µF decoupling capacitor is recommended.
27 GD output Gate driver output for external N-FET.
28 PGND power_in Power ground.
29 ISNS input Boost current sense pin.
30 ISNSGND power_in Current sense resistor GND.
31 ISET passive LED full-scale current setup through external resistor.
32 FB input Boost feedback input.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package QFN-32-EP(5x5)
Category Nixie Tube Driver/LED Driver
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Shutdown mode current, VDD pin IQ 1 5 µA EN = L 6
Active mode current, VDD pin (303 kHz, CP disabled) IQ 15 65 mA FSW = 303 kHz, PWM = H, BOOST-FET IPD25N06S4L-30, Charge Pump Disabled 6
Active mode current, VDD pin (2200 kHz, CP disabled) IQ 40 75 mA FSW = 2200 kHz, PWM = H, BOOST-FET IPD25N06S4L-30, Charge Pump Disabled 6
Active mode current, VDD pin (303 kHz, CP enabled) IQ 20 91 mA FSW = 303 kHz, PWM = H, BOOST-FET IPD25N06S4L-30, Charge Pump Enabled 6
Active mode current, VDD pin (2200 kHz, CP enabled) IQ 65 104 mA FSW = 2200 kHz, PWM = H, BOOST-FET IPD25N06S4L-30, Charge Pump Enabled 6
CPUMP voltage accuracy VCPUMP 4.8 5 5.2 V VDD = 3.0 to 3.6 V; ILOAD = 1 to 50 mA 6
CP switching frequency fCP 387 417 447 kHz 6
VCPUMP UVLO threshold falling VCPUMP_UVLO 3.95 4.2 4.4 V VCPUMP falling edge 6
VCPUMP UVLO threshold rising VCPUMP_UVLO 4.15 4.4 4.6 V VCPUMP rising edge 6
VCPUMP UVLO hysteresis VCPUMP_HYS 0.1 0.2 V 6
Charge pump startup time TSTART_UP 1000 2000 µs CCPUMP = 10 µF 6
VDD UVLO threshold falling VDDUVLO_F 2.68 2.8 2.92 V VDD falling 6
VDD UVLO threshold rising VDDUVLO_R 3 V VDD rising 6
VDD UVLO hysteresis VDDUVLO_H 0.1 V 6
UVLO pin threshold VINUVLO_TH 0.753 0.777 0.801 V VUVLO falling 6
OVP threshold VINOVP_TH 40.8 43 45.2 V VSENSE_P rising 7
Input OCP threshold VINOCP_TH 187 220 253 mV RISENSE = 20 mΩ 7
Thermal shutdown threshold TSD 150 165 180 °C Temperature rising 7
Boost OVP high threshold (discharge pin) VBST_OVPH 48.5 50 51.8 V 7
SD pull down current ISD 250 325 400 µA RSD = 20 kΩ 7
SD leakage current ISD_LEAKAGE 1 µA VSD = 48 V 7
PWM leakage current IPWM_LEAKAGE 1 µA VPWM = 5 V 7
PWM input frequency fPWM_IN 100 20000 Hz 7
ISET voltage VISET 1.17 1.21 1.25 V 7
ISET pin undervoltage VISET_UVLO 0.97 1 1.03 V 7
ISET resistor range RISET 15.6 104 kΩ IOUT = 30 mA to 200 mA 7
LED sink current accuracy IACC -4 4 % RISET = 15.6 kΩ, IOUT = 150 mA, PWM = 100% 7
LED sink current matching IMATCH 1 3.5 % RISET = 15.6 kΩ, IOUT = 150 mA, PWM = 100% 7
OUTx leakage current ILEAKAGE 0.1 2.5 µA OUTx = VOUT = 45 V, EN= L 7
LED dimming frequency fDIM 141 152 163 Hz PWM_FSET = 3.92 kΩ 8
LED dimming frequency fDIM 283 305 327 Hz PWM_FSET = 4.75 kΩ 8
LED dimming frequency fDIM 567 610 653 Hz PWM_FSET = 5.76 kΩ 8
LED dimming frequency fDIM 1135 1221 1307 Hz PWM_FSET = 7.87 kΩ 8
LED dimming frequency fDIM 2270 2441 2612 Hz PWM_FSET = 11 kΩ 8
LED dimming frequency fDIM 4541 4883 5225 Hz PWM_FSET = 17.8 kΩ 8
LED dimming frequency fDIM 9082 9766 10450 Hz PWM_FSET = 42.4 kΩ 8
LED dimming frequency fDIM 18163 19531 20899 Hz PWM_FSET = 124 kΩ 8
Switching Frequency fSW 93 100 107 kHz BST_FSET = 7.87 kΩ 8
Switching Frequency fSW 186 200 214 kHz BST_FSET = 4.75 kΩ 8
Switching Frequency fSW 281 303 325 kHz BST_FSET = 5.76 kΩ 8
Switching Frequency fSW 372 400 428 kHz BST_FSET = 3.92 kΩ 8
Switching Frequency fSW 465 500 535 kHz BST_FSET = 11 kΩ 8
Switching Frequency fSW 1690 1818 1946 kHz BST_FSET = 17.8 kΩ 8
Switching Frequency fSW 1860 2000 2140 kHz BST_FSET = 42.4 kΩ 8
Switching Frequency fSW 2066 2222 2378 kHz BST_FSET = 124 kΩ 8
External FET current limit VISNS 180 200 220 mV VISNS threshold, RSENSE= 15 to 50 mΩ 8
IDAC maximum current ISEL_MAX 36.4 38.7 40.2 µA VDD = 3.3 V 8
EN logic low threshold VENIL 0.4 V 9
EN logic high threshold VENIH 1.2 V 9
Logic low threshold VIL 0.4 V VDD = 3.3 V and 5 V 9
Logic high threshold VIH 1.2 V VDD = 3.3 V and 5 V 9
Output level low VOL 0.2 0.4 V I = 3 mA 9
Output leakage current ILEAKAGE 1 µA V = 3.3 V 9
Clock frequency fSCLK 400 kHz 9
Junction-to-ambient thermal resistance RθJA 32.9 °C/W QFN 32-pin 6
Junction-to-case (top) thermal resistance RθJC(top) 19.6 °C/W 6
Junction-to-board thermal resistance RθJB 6.8 °C/W 6
Junction-to-case (bottom) thermal resistance RθJC(bot) 1.8 °C/W 6
Voltage on VSENSE_P, FB, OUT1 to OUT4 -0.3 52 V 5
Voltage on C1N, C1P, VDD, EN, ISNS, ISNS_GND, INT, MODE, PWM_FSET, BST_FSET, LED_SET, ISET, GD, CPUMP -0.3 6 V 5
Junction temperature TJ -40 150 °C 5
Storage temperature Tstg -65 150 °C 5
Voltage on VSENSE_P, VSENSE_N, SD, UVLO 3 12 48 V 5
VDD voltage VDD 3 5.5 V NOM printed as 3.3/5 5
Ambient temperature TA -40 125 °C 5

CAD (KiCad official)

  • Symbol: TPS92390RHBR
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: tps92390rhbr-etched.step / tps92390rhbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps92390rhbr.step / tps92390rhbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (78 pp, sha256 c24eaa970042aaaf, retrieved 2026-10-31, tier: manufacturer) (maker link no longer resolves; copy stored with this page)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF