main
Ray
Publish 0.1.0
d92df8b
TPS7B8733QKVURQ1
Texas Instruments · Linear Voltage Regulators (LDO) · TO-252-4
TPS7B8733QKVURQ1 from Texas Instruments, in a TO-252-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply voltage pin (3 V to 40 V recommended operating range, 42 V absolute maximum); place the recommended input capacitor (0.1 µF to 1 µF) from IN to GND as close to the device as possible for ideal transient response. |
| 2 | PG | output | Power-good open-drain output with an internal 10 to 50 kΩ pull-up that must not be tied to VOUT or any other bias rail, and is logic high when VOUT is above the power-good threshold (VPG absolute maximum 20 V, 18 V recommended, low level 0.4 V max). |
| 3 | GND | power_in | Ground reference pin for the regulator; the thermal pad should be connected to a large GND plane for best thermal performance. |
| 4 | DELAY | input | Power-good delay adjust pin: connect a capacitor (1 µF recommended) between DELAY and GND to set the PG reset delay, or leave it floating for the default t(DLY_FIX) delay, since tying it to GND permanently increases GND current. |
| 5 | OUT | output | Regulated output pin that requires a capacitor from OUT to GND for stability, with 2.2 µF to 220 µF and ESR of 0.001 Ω to 2 Ω recommended, placed as close to the output as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-252-4 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (IOUT 100µA to 450mA, TJ=25°C) | VOUT | -0.85 | 0.85 | % | VIN-VOUT=1V至40V,IOUT=100µA至450mA,TJ=25ºC | 6 | |
| Output voltage accuracy (IOUT 100µA to 500mA, TJ=25°C) | VOUT | -0.85 | 0.85 | % | VIN-VOUT=1V至40V,IOUT=100µA至500mA,TJ=25ºC | 6 | |
| Output voltage accuracy (IOUT 100µA to 450mA, full temperature) | VOUT | -1.15 | 1.15 | % | VIN=VOUT+1V至40V,IOUT=100µA至450mA | 6 | |
| Output voltage accuracy (IOUT 100µA to 500mA, full temperature) | VOUT | -1.15 | 1.15 | % | VIN=VOUT+1V至40V,IOUT=100µA至500mA | 6 | |
| Load regulation (B version), 450mA | ΔVOUT(ΔIOUT) | 0.45 | % | VIN=VOUT+1V,IOUT=100µA至450mA,VOUT≥3.3V | 6 | ||
| Load regulation (B version), 500mA | ΔVOUT(ΔIOUT) | 0.475 | % | VIN=VOUT+1V,IOUT=100µA至500mA,VOUT≥3.3V | 6 | ||
| Load regulation, 450mA | ΔVOUT(ΔIOUT) | 0.425 | % | VIN=VOUT+1V,IOUT=100µA至450mA,VOUT≥3.3V | 6 | ||
| Load regulation, 500mA | ΔVOUT(ΔIOUT) | 0.45 | % | VIN=VOUT+1V,IOUT=100µA至500mA,VOUT≥3.3V | 6 | ||
| Line regulation | ΔVOUT(ΔVIN) | 0.2 | % | VIN=VOUT+1V至40V,IOUT=100µA | 6 | ||
| Load transient response settling time | ΔVOUT | 100 | µs | tR=tF=1µs;COUT=10µF,VOUT≥3.3V | 6 | ||
| Load transient undershoot, IOUT 150mA to 350mA | ΔVOUT | -2 | %VOUT | tR=tF=1µs;COUT=10µF,IOUT=150mA至350mA | 6 | ||
| Load transient overshoot, IOUT 350mA to 150mA | ΔVOUT | 10 | %VOUT | tR=tF=1µs;COUT=10µF,IOUT=350mA至150mA | 6 | ||
| Load transient undershoot, IOUT 0mA to 500mA | ΔVOUT | -10 | %VOUT | tR=tF=1µs;COUT=10µF,IOUT=0mA至500mA | 6 | ||
| Quiescent current | IQ | 17 | 21 | µA | VIN=VOUT+1V至40V,IOUT=0mA,TJ=25ºC | 6 | |
| Quiescent current (full temperature) | IQ | 26 | µA | VIN=VOUT+1V至40V,IOUT=0mA | 6 | ||
| Quiescent current, load | IQ | 35 | µA | IOUT=500µA | 6 | ||
| Dropout voltage (KVU package), light load | VDO | 46 | mV | IOUT≤1mA,VOUT≥3.3V,VIN=VOUT(NOM)x0.95 | 6 | ||
| Dropout voltage (KVU package), 315mA | VDO | 275 | 400 | mV | IOUT=315mA,VOUT≥3.3V,VIN=VOUT(NOM) | 6 | |
| Dropout voltage (KVU package), 450mA | VDO | 360 | 525 | mV | IOUT=450mA,VOUT≥3.3V,VIN=VOUT(NOM) | 6 | |
| Dropout voltage (KVU package), 500mA | VDO | 390 | 575 | mV | IOUT=500mA,VOUT≥3.3V,VIN=VOUT(NOM) | 6 | |
| Input UVLO rising threshold | VUVLO(RISING) | 2.6 | 2.7 | 2.82 | V | VIN上升 | 6 |
| Input UVLO falling threshold | VUVLO(FALLING) | 2.38 | 2.5 | 2.6 | V | VIN下降 | 6 |
| Input UVLO hysteresis | VUVLO(HYST) | 230 | mV | 6 | |||
| Output current limit | ICL | 540 | 780 | mA | VIN=VOUT+1V,VOUT短接至90%×VOUT(NOM) | 6 | |
| Power supply rejection ratio | PSRR | 70 | dB | VIN-VOUT=1V,频率=1kHz,IOUT=450mA | 6 | ||
| Power-good internal pull-up resistance | RPG | 10 | 30 | 50 | kΩ | 6 | |
| PG pin low-level output voltage | VPG(OL) | 0.4 | V | VOUT ≤ 0.83x VOUT | 6 | ||
| Default power-good threshold, VOUT rising | VPG(TH,RISING) | 85 | 95 | %VOUT | VOUT上升 | 6 | |
| Default power-good threshold, VOUT falling | VPG(TH,FALLING) | 83 | 93 | %VOUT | VOUT下降 | 6 | |
| Power-good hysteresis | VPG(HYST) | 2 | %VOUT | 6 | |||
| Delay pin release threshold (power-good) | VDLY(TH) | 1.17 | 1.21 | 1.25 | V | DELAY引脚上升时的电压 | 6 |
| Delay capacitor charge current | IDLY(CHARGE) | 1 | 1.5 | 2 | µA | DELAY引脚的电压=1V | 6 |
| Operating junction temperature | TJ | -40 | 150 | °C | 6 | ||
| Power-good fixed propagation delay | t(DLY_FIX) | 100 | µs | DELAY引脚无电容连接 | 7 | ||
| Power-good deglitch time | t(Deglitch) | 90 | µs | DELAY引脚无电容连接 | 7 | ||
| Power-good propagation delay with adjustable delay | t(DLY) | 80 | ms | C(DELAY)=100nF | 7 | ||
| Input voltage | VIN | 3 | 40 | V | 5 | ||
| Output voltage | VOUT | 1.2 | 18 | V | 5 | ||
| Output current | IOUT | 0 | 500 | mA | 5 | ||
| Delay pin voltage | VDelay | 0 | 5.5 | V | 电源正常可调节阈值 | 5 | |
| Power-good output pin voltage | VPG | 0 | 18 | V | 5 | ||
| Output capacitor | COUT | 2.2 | 220 | µF | 5 | ||
| Output capacitor ESR | ESR | 0.001 | 2 | Ω | 5 | ||
| Input capacitor | CIN | 0.1 | 1 | µF | 5 | ||
| Operating ambient temperature (temperature grade 1) | TA | -40 | 125 | °C | AEC-Q100 温度等级 1 | 1 | |
| Thermal shutdown junction temperature | TSD(SHUTDOWN) | 175 | °C | 6 | |||
| Thermal shutdown hysteresis | TSD(HYST) | 20 | °C | 6 | |||
| Junction-to-ambient thermal resistance (KVU 5-pin) | RθJA | 29.7 | °C/W | KVU 5引脚封装,JEDEC JESD 51-7 高K板 | 5 | ||
| Junction-to-case (top) thermal resistance (KVU 5-pin) | RθJC(top) | 40.2 | °C/W | KVU 5引脚封装 | 5 | ||
| Junction-to-board thermal resistance (KVU 5-pin) | RθJB | 8.6 | °C/W | KVU 5引脚封装 | 5 | ||
| Junction-to-top characterization parameter (KVU 5-pin) | ψJT | 2.9 | °C/W | KVU 5引脚封装 | 5 | ||
| Junction-to-board characterization parameter (KVU 5-pin) | ψJB | 8.5 | °C/W | KVU 5引脚封装 | 5 | ||
| Junction-to-case (bottom) thermal resistance (KVU 5-pin) | RθJC(bot) | 1.5 | °C/W | KVU 5引脚封装 | 5 |
CAD (KiCad official)
- Symbol:
TPS7B8733QKVURQ1 - Footprint:
Package_TO_SOT_SMD:TO-252-4 - 3D model: TO-252-4 (KiCad packages3D, STEP)
- 3D model files:
tps7b8733qkvurq1-etched.step/tps7b8733qkvurq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7b8733qkvurq1.step/tps7b8733qkvurq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
421de3642e32b8ba, retrieved 2026-10-29, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS7B8733QKVURQ1
**Texas Instruments** · Linear Voltage Regulators (LDO) · TO-252-4
TPS7B8733QKVURQ1 from Texas Instruments, in a TO-252-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply voltage pin (3 V to 40 V recommended operating range, 42 V absolute maximum); place the recommended input capacitor (0.1 µF to 1 µF) from IN to GND as close to the device as possible for ideal transient response. |
| 2 | PG | output | Power-good open-drain output with an internal 10 to 50 kΩ pull-up that must not be tied to VOUT or any other bias rail, and is logic high when VOUT is above the power-good threshold (VPG absolute maximum 20 V, 18 V recommended, low level 0.4 V max). |
| 3 | GND | power_in | Ground reference pin for the regulator; the thermal pad should be connected to a large GND plane for best thermal performance. |
| 4 | DELAY | input | Power-good delay adjust pin: connect a capacitor (1 µF recommended) between DELAY and GND to set the PG reset delay, or leave it floating for the default t(DLY_FIX) delay, since tying it to GND permanently increases GND current. |
| 5 | OUT | output | Regulated output pin that requires a capacitor from OUT to GND for stability, with 2.2 µF to 220 µF and ESR of 0.001 Ω to 2 Ω recommended, placed as close to the output as possible. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-252-4 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (IOUT 100µA to 450mA, TJ=25°C) | VOUT | -0.85 | | 0.85 | % | VIN-VOUT=1V至40V,IOUT=100µA至450mA,TJ=25ºC | 6 |
| Output voltage accuracy (IOUT 100µA to 500mA, TJ=25°C) | VOUT | -0.85 | | 0.85 | % | VIN-VOUT=1V至40V,IOUT=100µA至500mA,TJ=25ºC | 6 |
| Output voltage accuracy (IOUT 100µA to 450mA, full temperature) | VOUT | -1.15 | | 1.15 | % | VIN=VOUT+1V至40V,IOUT=100µA至450mA | 6 |
| Output voltage accuracy (IOUT 100µA to 500mA, full temperature) | VOUT | -1.15 | | 1.15 | % | VIN=VOUT+1V至40V,IOUT=100µA至500mA | 6 |
| Load regulation (B version), 450mA | ΔVOUT(ΔIOUT) | | | 0.45 | % | VIN=VOUT+1V,IOUT=100µA至450mA,VOUT≥3.3V | 6 |
| Load regulation (B version), 500mA | ΔVOUT(ΔIOUT) | | | 0.475 | % | VIN=VOUT+1V,IOUT=100µA至500mA,VOUT≥3.3V | 6 |
| Load regulation, 450mA | ΔVOUT(ΔIOUT) | | | 0.425 | % | VIN=VOUT+1V,IOUT=100µA至450mA,VOUT≥3.3V | 6 |
| Load regulation, 500mA | ΔVOUT(ΔIOUT) | | | 0.45 | % | VIN=VOUT+1V,IOUT=100µA至500mA,VOUT≥3.3V | 6 |
| Line regulation | ΔVOUT(ΔVIN) | | | 0.2 | % | VIN=VOUT+1V至40V,IOUT=100µA | 6 |
| Load transient response settling time | ΔVOUT | | | 100 | µs | tR=tF=1µs;COUT=10µF,VOUT≥3.3V | 6 |
| Load transient undershoot, IOUT 150mA to 350mA | ΔVOUT | -2 | | | %VOUT | tR=tF=1µs;COUT=10µF,IOUT=150mA至350mA | 6 |
| Load transient overshoot, IOUT 350mA to 150mA | ΔVOUT | | | 10 | %VOUT | tR=tF=1µs;COUT=10µF,IOUT=350mA至150mA | 6 |
| Load transient undershoot, IOUT 0mA to 500mA | ΔVOUT | -10 | | | %VOUT | tR=tF=1µs;COUT=10µF,IOUT=0mA至500mA | 6 |
| Quiescent current | IQ | | 17 | 21 | µA | VIN=VOUT+1V至40V,IOUT=0mA,TJ=25ºC | 6 |
| Quiescent current (full temperature) | IQ | | | 26 | µA | VIN=VOUT+1V至40V,IOUT=0mA | 6 |
| Quiescent current, load | IQ | | | 35 | µA | IOUT=500µA | 6 |
| Dropout voltage (KVU package), light load | VDO | | | 46 | mV | IOUT≤1mA,VOUT≥3.3V,VIN=VOUT(NOM)x0.95 | 6 |
| Dropout voltage (KVU package), 315mA | VDO | | 275 | 400 | mV | IOUT=315mA,VOUT≥3.3V,VIN=VOUT(NOM) | 6 |
| Dropout voltage (KVU package), 450mA | VDO | | 360 | 525 | mV | IOUT=450mA,VOUT≥3.3V,VIN=VOUT(NOM) | 6 |
| Dropout voltage (KVU package), 500mA | VDO | | 390 | 575 | mV | IOUT=500mA,VOUT≥3.3V,VIN=VOUT(NOM) | 6 |
| Input UVLO rising threshold | VUVLO(RISING) | 2.6 | 2.7 | 2.82 | V | VIN上升 | 6 |
| Input UVLO falling threshold | VUVLO(FALLING) | 2.38 | 2.5 | 2.6 | V | VIN下降 | 6 |
| Input UVLO hysteresis | VUVLO(HYST) | | | 230 | mV | | 6 |
| Output current limit | ICL | 540 | | 780 | mA | VIN=VOUT+1V,VOUT短接至90%×VOUT(NOM) | 6 |
| Power supply rejection ratio | PSRR | 70 | | | dB | VIN-VOUT=1V,频率=1kHz,IOUT=450mA | 6 |
| Power-good internal pull-up resistance | RPG | 10 | 30 | 50 | kΩ | | 6 |
| PG pin low-level output voltage | VPG(OL) | | | 0.4 | V | VOUT ≤ 0.83x VOUT | 6 |
| Default power-good threshold, VOUT rising | VPG(TH,RISING) | 85 | | 95 | %VOUT | VOUT上升 | 6 |
| Default power-good threshold, VOUT falling | VPG(TH,FALLING) | 83 | | 93 | %VOUT | VOUT下降 | 6 |
| Power-good hysteresis | VPG(HYST) | | | 2 | %VOUT | | 6 |
| Delay pin release threshold (power-good) | VDLY(TH) | 1.17 | 1.21 | 1.25 | V | DELAY引脚上升时的电压 | 6 |
| Delay capacitor charge current | IDLY(CHARGE) | 1 | 1.5 | 2 | µA | DELAY引脚的电压=1V | 6 |
| Operating junction temperature | TJ | -40 | | 150 | °C | | 6 |
| Power-good fixed propagation delay | t(DLY_FIX) | | | 100 | µs | DELAY引脚无电容连接 | 7 |
| Power-good deglitch time | t(Deglitch) | | | 90 | µs | DELAY引脚无电容连接 | 7 |
| Power-good propagation delay with adjustable delay | t(DLY) | | | 80 | ms | C(DELAY)=100nF | 7 |
| Input voltage | VIN | 3 | | 40 | V | | 5 |
| Output voltage | VOUT | 1.2 | | 18 | V | | 5 |
| Output current | IOUT | 0 | | 500 | mA | | 5 |
| Delay pin voltage | VDelay | 0 | | 5.5 | V | 电源正常可调节阈值 | 5 |
| Power-good output pin voltage | VPG | 0 | | 18 | V | | 5 |
| Output capacitor | COUT | 2.2 | | 220 | µF | | 5 |
| Output capacitor ESR | ESR | 0.001 | | 2 | Ω | | 5 |
| Input capacitor | CIN | 0.1 | | 1 | µF | | 5 |
| Operating ambient temperature (temperature grade 1) | TA | -40 | | 125 | °C | AEC-Q100 温度等级 1 | 1 |
| Thermal shutdown junction temperature | TSD(SHUTDOWN) | | 175 | | °C | | 6 |
| Thermal shutdown hysteresis | TSD(HYST) | | 20 | | °C | | 6 |
| Junction-to-ambient thermal resistance (KVU 5-pin) | RθJA | | 29.7 | | °C/W | KVU 5引脚封装,JEDEC JESD 51-7 高K板 | 5 |
| Junction-to-case (top) thermal resistance (KVU 5-pin) | RθJC(top) | | 40.2 | | °C/W | KVU 5引脚封装 | 5 |
| Junction-to-board thermal resistance (KVU 5-pin) | RθJB | | 8.6 | | °C/W | KVU 5引脚封装 | 5 |
| Junction-to-top characterization parameter (KVU 5-pin) | ψJT | | 2.9 | | °C/W | KVU 5引脚封装 | 5 |
| Junction-to-board characterization parameter (KVU 5-pin) | ψJB | | 8.5 | | °C/W | KVU 5引脚封装 | 5 |
| Junction-to-case (bottom) thermal resistance (KVU 5-pin) | RθJC(bot) | | 1.5 | | °C/W | KVU 5引脚封装 | 5 |
## CAD (KiCad official)
- Symbol: `TPS7B8733QKVURQ1`
- Footprint: `Package_TO_SOT_SMD:TO-252-4`
- 3D model: TO-252-4 (KiCad packages3D, STEP)
- 3D model files: `tps7b8733qkvurq1-etched.step` / `tps7b8733qkvurq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps7b8733qkvurq1.step` / `tps7b8733qkvurq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps7b87-q1) (44 pp, sha256 `421de3642e32b8ba`, retrieved 2026-10-29, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps7b8733qkvurq1-datasheet.pdf)