main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps7b8733qkvurq1: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tps7b8733qkvurq1-etched.glb Publish 0.1.0 · Ray
tps7b8733qkvurq1-etched.step tps7b8733qkvurq1: factory component page (tier=mfr) · Ray
tps7b8733qkvurq1-hero.glb tps7b8733qkvurq1: hero GLB from the etched model (keeps the MPN mark) · Ray
tps7b8733qkvurq1-hero.overlay.json Publish 0.1.0 · Ray
tps7b8733qkvurq1.glb Publish 0.1.0 · Ray
tps7b8733qkvurq1.kicad_mod Publish 0.1.0 · Ray
tps7b8733qkvurq1.kicad_sym Publish 0.1.0 · Ray
tps7b8733qkvurq1.lbr Publish 0.1.0 · Ray
tps7b8733qkvurq1.step Publish 0.1.0 · Ray

TPS7B8733QKVURQ1

Texas Instruments · Linear Voltage Regulators (LDO) · TO-252-4

TPS7B8733QKVURQ1 from Texas Instruments, in a TO-252-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input supply voltage pin (3 V to 40 V recommended operating range, 42 V absolute maximum); place the recommended input capacitor (0.1 µF to 1 µF) from IN to GND as close to the device as possible for ideal transient response.
2 PG output Power-good open-drain output with an internal 10 to 50 kΩ pull-up that must not be tied to VOUT or any other bias rail, and is logic high when VOUT is above the power-good threshold (VPG absolute maximum 20 V, 18 V recommended, low level 0.4 V max).
3 GND power_in Ground reference pin for the regulator; the thermal pad should be connected to a large GND plane for best thermal performance.
4 DELAY input Power-good delay adjust pin: connect a capacitor (1 µF recommended) between DELAY and GND to set the PG reset delay, or leave it floating for the default t(DLY_FIX) delay, since tying it to GND permanently increases GND current.
5 OUT output Regulated output pin that requires a capacitor from OUT to GND for stability, with 2.2 µF to 220 µF and ESR of 0.001 Ω to 2 Ω recommended, placed as close to the output as possible.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TO-252-4
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy (IOUT 100µA to 450mA, TJ=25°C) VOUT -0.85 0.85 % VIN-VOUT=1V至40V,IOUT=100µA至450mA,TJ=25ºC 6
Output voltage accuracy (IOUT 100µA to 500mA, TJ=25°C) VOUT -0.85 0.85 % VIN-VOUT=1V至40V,IOUT=100µA至500mA,TJ=25ºC 6
Output voltage accuracy (IOUT 100µA to 450mA, full temperature) VOUT -1.15 1.15 % VIN=VOUT+1V至40V,IOUT=100µA至450mA 6
Output voltage accuracy (IOUT 100µA to 500mA, full temperature) VOUT -1.15 1.15 % VIN=VOUT+1V至40V,IOUT=100µA至500mA 6
Load regulation (B version), 450mA ΔVOUT(ΔIOUT) 0.45 % VIN=VOUT+1V,IOUT=100µA至450mA,VOUT≥3.3V 6
Load regulation (B version), 500mA ΔVOUT(ΔIOUT) 0.475 % VIN=VOUT+1V,IOUT=100µA至500mA,VOUT≥3.3V 6
Load regulation, 450mA ΔVOUT(ΔIOUT) 0.425 % VIN=VOUT+1V,IOUT=100µA至450mA,VOUT≥3.3V 6
Load regulation, 500mA ΔVOUT(ΔIOUT) 0.45 % VIN=VOUT+1V,IOUT=100µA至500mA,VOUT≥3.3V 6
Line regulation ΔVOUT(ΔVIN) 0.2 % VIN=VOUT+1V至40V,IOUT=100µA 6
Load transient response settling time ΔVOUT 100 µs tR=tF=1µs;COUT=10µF,VOUT≥3.3V 6
Load transient undershoot, IOUT 150mA to 350mA ΔVOUT -2 %VOUT tR=tF=1µs;COUT=10µF,IOUT=150mA至350mA 6
Load transient overshoot, IOUT 350mA to 150mA ΔVOUT 10 %VOUT tR=tF=1µs;COUT=10µF,IOUT=350mA至150mA 6
Load transient undershoot, IOUT 0mA to 500mA ΔVOUT -10 %VOUT tR=tF=1µs;COUT=10µF,IOUT=0mA至500mA 6
Quiescent current IQ 17 21 µA VIN=VOUT+1V至40V,IOUT=0mA,TJ=25ºC 6
Quiescent current (full temperature) IQ 26 µA VIN=VOUT+1V至40V,IOUT=0mA 6
Quiescent current, load IQ 35 µA IOUT=500µA 6
Dropout voltage (KVU package), light load VDO 46 mV IOUT≤1mA,VOUT≥3.3V,VIN=VOUT(NOM)x0.95 6
Dropout voltage (KVU package), 315mA VDO 275 400 mV IOUT=315mA,VOUT≥3.3V,VIN=VOUT(NOM) 6
Dropout voltage (KVU package), 450mA VDO 360 525 mV IOUT=450mA,VOUT≥3.3V,VIN=VOUT(NOM) 6
Dropout voltage (KVU package), 500mA VDO 390 575 mV IOUT=500mA,VOUT≥3.3V,VIN=VOUT(NOM) 6
Input UVLO rising threshold VUVLO(RISING) 2.6 2.7 2.82 V VIN上升 6
Input UVLO falling threshold VUVLO(FALLING) 2.38 2.5 2.6 V VIN下降 6
Input UVLO hysteresis VUVLO(HYST) 230 mV 6
Output current limit ICL 540 780 mA VIN=VOUT+1V,VOUT短接至90%×VOUT(NOM) 6
Power supply rejection ratio PSRR 70 dB VIN-VOUT=1V,频率=1kHz,IOUT=450mA 6
Power-good internal pull-up resistance RPG 10 30 50 kΩ 6
PG pin low-level output voltage VPG(OL) 0.4 V VOUT ≤ 0.83x VOUT 6
Default power-good threshold, VOUT rising VPG(TH,RISING) 85 95 %VOUT VOUT上升 6
Default power-good threshold, VOUT falling VPG(TH,FALLING) 83 93 %VOUT VOUT下降 6
Power-good hysteresis VPG(HYST) 2 %VOUT 6
Delay pin release threshold (power-good) VDLY(TH) 1.17 1.21 1.25 V DELAY引脚上升时的电压 6
Delay capacitor charge current IDLY(CHARGE) 1 1.5 2 µA DELAY引脚的电压=1V 6
Operating junction temperature TJ -40 150 °C 6
Power-good fixed propagation delay t(DLY_FIX) 100 µs DELAY引脚无电容连接 7
Power-good deglitch time t(Deglitch) 90 µs DELAY引脚无电容连接 7
Power-good propagation delay with adjustable delay t(DLY) 80 ms C(DELAY)=100nF 7
Input voltage VIN 3 40 V 5
Output voltage VOUT 1.2 18 V 5
Output current IOUT 0 500 mA 5
Delay pin voltage VDelay 0 5.5 V 电源正常可调节阈值 5
Power-good output pin voltage VPG 0 18 V 5
Output capacitor COUT 2.2 220 µF 5
Output capacitor ESR ESR 0.001 2 Ω 5
Input capacitor CIN 0.1 1 µF 5
Operating ambient temperature (temperature grade 1) TA -40 125 °C AEC-Q100 温度等级 1 1
Thermal shutdown junction temperature TSD(SHUTDOWN) 175 °C 6
Thermal shutdown hysteresis TSD(HYST) 20 °C 6
Junction-to-ambient thermal resistance (KVU 5-pin) RθJA 29.7 °C/W KVU 5引脚封装,JEDEC JESD 51-7 高K板 5
Junction-to-case (top) thermal resistance (KVU 5-pin) RθJC(top) 40.2 °C/W KVU 5引脚封装 5
Junction-to-board thermal resistance (KVU 5-pin) RθJB 8.6 °C/W KVU 5引脚封装 5
Junction-to-top characterization parameter (KVU 5-pin) ψJT 2.9 °C/W KVU 5引脚封装 5
Junction-to-board characterization parameter (KVU 5-pin) ψJB 8.5 °C/W KVU 5引脚封装 5
Junction-to-case (bottom) thermal resistance (KVU 5-pin) RθJC(bot) 1.5 °C/W KVU 5引脚封装 5

CAD (KiCad official)

  • Symbol: TPS7B8733QKVURQ1
  • Footprint: Package_TO_SOT_SMD:TO-252-4
  • 3D model: TO-252-4 (KiCad packages3D, STEP)
  • 3D model files: tps7b8733qkvurq1-etched.step / tps7b8733qkvurq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7b8733qkvurq1.step / tps7b8733qkvurq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 421de3642e32b8ba, retrieved 2026-10-29, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF