TPS7A9201DSKT

{
  "schema_version": 1,
  "type": "component",
  "slug": "tps7a9201dskt",
  "title": "TPS7A9201DSKT",
  "brief": "Texas Instruments Pre-ordered Chips, SON-10-EP(2.5x2.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface ics",
    "tps7a9201dskt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS7A9201DSKT",
    "manufacturer": "Texas Instruments",
    "package": "SON-10-EP(2.5x2.5)",
    "pin_count": 11,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps7a9201dskt.pdf",
    "parts": {
      "symbol": "tps7a9201dskt.kicad_sym",
      "footprint": "tps7a9201dskt.kicad_mod",
      "model_3d": "tps7a9201dskt-hero.glb",
      "model_3d_plain": "tps7a9201dskt-etched.glb",
      "model_3d_step": "tps7a9201dskt-etched.step",
      "model_3d_step_plain": "tps7a9201dskt.step",
      "lbr": "tps7a9201dskt.lbr"
    },
    "distributor_links": {
      "lcsc": "C2878139",
      "digikey": "296-47106-2-ND",
      "mouser": "595-TPS7A9201DSKT"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T03:08:07Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-47106-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS7A9201DSKT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output; a 22 µF or greater capacitor must be connected from this pin to GND for stability."
      },
      {
        "number": "2",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output; a 22 µF or greater capacitor must be connected from this pin to GND for stability."
      },
      {
        "number": "3",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin, input to the control loop error amplifier used to set the output voltage of the device."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground; connect to the device thermal pad."
      },
      {
        "number": "5",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good indicator for the LDO output voltage; requires a 10-kΩ to 100-kΩ external pullup resistor and can be left floating or connected to GND if not used."
      },
      {
        "number": "6",
        "name": "SS_CTRL",
        "type": "input",
        "description": "Soft-start control pin; connect to GND or IN to change the NR/SS capacitor charging current, and connect to GND if no CNR/SS capacitor is used to avoid output overshoot."
      },
      {
        "number": "7",
        "name": "EN",
        "type": "input",
        "description": "Enable pin that turns the LDO on if VEN ≥ VIH(EN) and off if VEN ≤ VIL(EN); must be connected to IN if the enable function is not used."
      },
      {
        "number": "8",
        "name": "NR/SS",
        "type": "passive",
        "description": "Noise reduction pin; connect an external capacitor to bypass internal bandgap reference noise and to set the output ramp rate to limit inrush current."
      },
      {
        "number": "9",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin (1.4 V to 6.5 V); a 10 µF or greater input capacitor is required."
      },
      {
        "number": "10",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin (1.4 V to 6.5 V); a 10 µF or greater input capacitor is required."
      },
      {
        "number": "11",
        "name": "Thermal Pad",
        "type": "passive",
        "description": "Connect the thermal pad to the PCB ground plane."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet shows the thermal pad without a pin number; '11' is an assumed designator for it. It i; The datasheet lists NR/SS with I/O '—'. I classified it as passive. It is an external capacitor node; The datasheet calls the package DSK 10-pin WSON. The orderable addendum (TPS7A9201DSKT, 250 pcs) lis"
        ],
        "pages_sent": 12,
        "cost_usd": 0.1185,
        "at": "2026-10-23T03:07:55"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps7a9201dskt.pdf",
        "pages": 35,
        "sha256": "3ae79b98655c8256",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps7a9201dskt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.5,
          2.475,
          0.76
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "26b11479728c38545462bbe7bb9e39e93c46ecc441c206ecdfeae513ed7b7b44",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps7a9201dskt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.5,
          2.475,
          0.76
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d6f1501fb2a2d1a48013ee5d059f2fcea92b3fa4d9dfa72740f919d47d304bcb",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SON-10-EP(2.5x2.5)",
      "Category": "Interface ICs",
      "Pins": "11"
    },
    "appearance": {
      "contacts": {
        "quote": "input and output capacitors, and to the LDO ground pin as close to each other as possible, connected by a wide, component-side, copper surface. The use of vias and long traces to create LDO circuit co",
        "page": 22,
        "doc": "ds.pdf",
        "material": "copper"
      },
      "version": 1,
      "datasheet_sha256": "3ae79b98655c8256dae059fc300b16e178bb33a87acd4493910a1d88502abc9b"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "3ae79b98655c8256dae059fc300b16e178bb33a87acd4493910a1d88502abc9b",
      "rows": [
        {
          "name": "Input supply voltage range",
          "symbol": "VIN",
          "kind": "electrical",
          "unit": "V",
          "min": 1.4,
          "typ": null,
          "max": 6.5,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Input supply UVLO",
          "symbol": "VUVLO",
          "kind": "electrical",
          "unit": "V",
          "min": 1.31,
          "typ": null,
          "max": 1.39,
          "conditions": "VIN rising",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Output voltage accuracy",
          "symbol": "VOUT",
          "kind": "electrical",
          "unit": "%",
          "min": -1,
          "typ": null,
          "max": 1,
          "conditions": "0.8 V ≤ VOUT ≤ 5 V, 5 mA ≤ IOUT ≤ 2 A",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Dropout voltage",
          "symbol": "VDO",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": null,
          "max": 400,
          "conditions": "VIN ≥ 1.4 V, 0.8 V ≤ VOUT ≤ 5.0 V, IOUT = 2 A, VFB = 0.8 V – 3%",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Output current limit",
          "symbol": "ILIM",
          "kind": "electrical",
          "unit": "A",
          "min": 2.3,
          "typ": 2.6,
          "max": 2.9,
          "conditions": "VOUT forced at 0.9 × VOUT(TARGET), VIN = VOUT(TARGET) + 300 mV",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "GND pin current",
          "symbol": "IGND",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 2.1,
          "max": 3.5,
          "conditions": "Both channels enabled, per channel, VIN = 6.5 V, IOUT = 5 mA",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Shutdown GND pin current",
          "symbol": "ISDN",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 0.1,
          "max": 15,
          "conditions": "Both channels shutdown, per channel, PGx = (open), VIN = 6.5 V, VEN = 0.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "EN pin current",
          "symbol": "IEN",
          "kind": "electrical",
          "unit": "µA",
          "min": -0.2,
          "typ": null,
          "max": 0.2,
          "conditions": "VIN = 6.5 V, 0 V ≤ VEN ≤ 6.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "EN pin low-level input voltage",
          "symbol": "VIL(EN)",
          "kind": "electrical",
          "unit": "V",
          "min": 0,
          "typ": null,
          "max": 0.4,
          "conditions": "device disabled",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "EN pin high-level input voltage",
          "symbol": "VIH(EN)",
          "kind": "electrical",
          "unit": "V",
          "min": 1.1,
          "typ": null,
          "max": 6.5,
          "conditions": "device enabled",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "SS_CTRL pin current",
          "symbol": "ISS_CTRL",
          "kind": "electrical",
          "unit": "µA",
          "min": -0.2,
          "typ": null,
          "max": 0.2,
          "conditions": "VIN = 6.5 V, 0 V ≤ VSS_CTRL ≤ 6.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "PG pin threshold",
          "symbol": "VIT(PG)",
          "kind": "electrical",
          "unit": "%",
          "min": 82,
          "typ": 88.9,
          "max": 93,
          "conditions": "For PG transitioning low with falling VOUT, expressed as a percentage of VOUT(TARGET)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "PG pin low-level output voltage",
          "symbol": "VOL(PG)",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "VOUT < VIT(PG), IPG = –1 mA (current into device)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "PG pin leakage current",
          "symbol": "Ilkg(PG)",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "VOUT > VIT(PG), VPG = 6.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "NR/SS pin charging current",
          "symbol": "INR/SS",
          "kind": "electrical",
          "unit": "µA",
          "min": 4,
          "typ": 6.2,
          "max": 9,
          "conditions": "VNR/SS = GND, 1.4 V ≤ VIN ≤ 6.5 V, VSS_CTRL = GND",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "NR/SS pin charging current",
          "symbol": "INR/SS",
          "kind": "electrical",
          "unit": "µA",
          "min": 65,
          "typ": 100,
          "max": 150,
          "conditions": "VNR/SS = GND, 1.4 V ≤ VIN ≤ 6.5 V, VSS_CTRL = VIN",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "FB pin leakage current",
          "symbol": "IFB",
          "kind": "electrical",
          "unit": "nA",
          "min": -100,
          "typ": null,
          "max": 100,
          "conditions": "VIN = 6.5 V, VFB = 0.8 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Output voltage range",
          "symbol": "VOUT",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 0.8,
          "typ": null,
          "max": 5.2,
          "conditions": "0.8 – 1.0% to 5.2 + 1.0%",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Reference voltage",
          "symbol": "VREF",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 0.8,
          "max": null,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Output current",
          "symbol": "IOUT",
          "kind": "recommended_operating",
          "unit": "A",
          "min": 0,
          "typ": null,
          "max": 2,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Power-good pullup resistance",
          "symbol": "RPG",
          "kind": "recommended_operating",
          "unit": "kΩ",
          "min": 10,
          "typ": null,
          "max": 100,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Junction temperature range",
          "symbol": "TJ",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Voltage IN, PG, EN",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Voltage IN, PG, EN pulse",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7.5,
          "conditions": "5% duty cycle, pulse duration = 200 µs",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Voltage NR/SS, FB",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "PG sink current",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 5,
          "conditions": "sink current into device",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Operating junction temperature",
          "symbol": "TJ",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -55,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature",
          "symbol": "Tstg",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -55,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "ESD HBM",
          "symbol": "V(ESD)",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -2000,
          "typ": null,
          "max": 2000,
          "conditions": "HBM per ANSI/ESDA/JEDEC JS-001",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "ESD CDM",
          "symbol": "V(ESD)",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -500,
          "typ": null,
          "max": 500,
          "conditions": "CDM per JESD22-C101",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-ambient thermal resistance",
          "symbol": "RθJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 56.9,
          "max": null,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-case (top) thermal resistance",
          "symbol": "RθJC(top)",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 46.3,
          "max": null,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-board thermal resistance",
          "symbol": "RθJB",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 29.1,
          "max": null,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-case (bottom) thermal resistance",
          "symbol": "RθJC(bot)",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 3.2,
          "max": null,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Line regulation",
          "symbol": "ΔVOUT(ΔVIN)",
          "kind": "electrical",
          "unit": "%/V",
          "min": null,
          "typ": 0.003,
          "max": null,
          "conditions": "IOUT= 5 mA, 1.4 V ≤ VIN ≤ 6.5 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Load regulation",
          "symbol": "ΔVOUT(ΔIOUT)",
          "kind": "electrical",
          "unit": "%/A",
          "min": null,
          "typ": 0.03,
          "max": null,
          "conditions": "5 mA ≤ IOUT ≤ 2 A",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Output noise voltage",
          "symbol": "Vn",
          "kind": "electrical",
          "unit": "μVRMS",
          "min": null,
          "typ": 4.6,
          "max": null,
          "conditions": "BW = 10 Hz to 100 kHz, VIN = 1.8 V, VOUT = 0.8 V, IOUT = 2.0 A, CNR/SS = 10 nF, CFF = 10 nF",
          "source_page": 5,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps7a9201dskt"
  ],
  "discovery_pitch": "TPS7A9201DSKT (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps7a9201dskt.kicad_sym",
    "tps7a9201dskt.kicad_mod",
    "tps7a9201dskt.glb",
    "tps7a9201dskt.step",
    "tps7a9201dskt.lbr",
    "docs/hero.png",
    "docs/tps7a9201dskt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps7a9201dskt-hero.glb",
    "tps7a9201dskt-hero.overlay.json",
    "tps7a9201dskt-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}