component
TPS7A8500ARGRR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, VQFN-20(3.5x3.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS7A8500ARGRR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VQFN-20(3.5x3.5)
TPS7A8500ARGRR from Texas Instruments, in a VQFN-20(3.5x3.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage pin; 47-μF or larger ceramic capacitor required for stability and low impedance to load. |
| 2 | SNS | input | Output voltage sense input pin; connect to load side of output trace only when ANY-OUT feature is used. |
| 3 | FB | input | Feedback pin connected to error amplifier; 10-nF feed-forward capacitor from FB to OUT recommended for ac performance. |
| 4 | PG | tri_state | Active-high, open-drain power-good output indicating when output voltage reaches VIT(PG) target. |
| 5 | 50mV | input | ANY-OUT voltage setting pin; connect to ground to increase output voltage, to SNS to increase resolution, or leave floating. |
| 6 | 100mV | input | ANY-OUT voltage setting pin; connect to ground to increase output voltage, to SNS to increase resolution, or leave floating. |
| 7 | 200mV | input | ANY-OUT voltage setting pin; connect to ground to increase output voltage, to SNS to increase resolution, or leave floating. |
| 8 | GND | power_in | Ground pin; must be connected to ground, thermal pad, and other GND pins with low-impedance connection. |
| 9 | 400mV | input | ANY-OUT voltage setting pin; connect to ground to increase output voltage, to SNS to increase resolution, or leave floating. |
| 10 | 800mV | input | ANY-OUT voltage setting pin; connect to ground to increase output voltage, to SNS to increase resolution, or leave floating. |
| 11 | 1.6V | input | ANY-OUT voltage setting pin; connect to ground to increase output voltage, to SNS to increase resolution, or leave floating. |
| 12 | BIAS | power_in | Bias supply voltage pin enabling low-input, low-output voltage conditions; requires 10-μF capacitor or larger between this pin and ground if used. |
| 13 | NR/SS | passive | Noise-reduction and soft-start pin; external capacitor from this pin to ground enables soft-start function and reduces reference voltage noise. |
| 14 | EN | input | Enable pin; logic high enables device, logic low disables device; must be connected to IN or BIAS if enable functionality not required. |
| 15 | IN | power_in | Input supply voltage pin; requires 10-μF or larger ceramic capacitor to ground to reduce input supply impedance. |
| 16 | IN | power_in | Input supply voltage pin; requires 10-μF or larger ceramic capacitor to ground to reduce input supply impedance. |
| 17 | IN | power_in | Input supply voltage pin; requires 10-μF or larger ceramic capacitor to ground to reduce input supply impedance. |
| 18 | GND | power_in | Ground pin; must be connected to ground, thermal pad, and other GND pins with low-impedance connection. |
| 19 | OUT | power_out | Regulated output voltage pin; 47-μF or larger ceramic capacitor required for stability and low impedance to load. |
| 20 | OUT | power_out | Regulated output voltage pin; 47-μF or larger ceramic capacitor required for stability and low impedance to load. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-20(3.5x3.5) |
| Category | Power Management (PMIC) |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
TPS7A8500ARGRR - Footprint:
Package_DFN_QFN:QFN-20-1EP_3.5x3.5mm_P0.5mm_EP2x2mm - 3D model: VQFN-20(3.5x3.5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps7a8500argrr-etched.step/tps7a8500argrr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a8500argrr.step/tps7a8500argrr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (49 pp, sha256
361d696b06535f2b, retrieved 2026-10-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).