main
Ray Publish 0.1.0 e26b020
{
  "slug": "tps7a7850pwpr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Linear Voltage Regulators (LDO), HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "tps7a7850pwpr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps7a7850pwpr.kicad_sym",
    "tps7a7850pwpr.kicad_mod",
    "tps7a7850pwpr.glb",
    "tps7a7850pwpr.step",
    "tps7a7850pwpr.lbr",
    "docs/hero.png",
    "docs/tps7a7850pwpr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps7a7850pwpr-hero.glb",
    "tps7a7850pwpr-hero.overlay.json",
    "tps7a7850pwpr-etched.glb"
  ],
  "component": {
    "mpn": "TPS7A7850PWPR",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-14-EP",
    "pin_count": 15,
    "category": "Power Supply Chip",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps7a78",
    "parts": {
      "symbol": "tps7a7850pwpr.kicad_sym",
      "footprint": "tps7a7850pwpr.kicad_mod",
      "model_3d": "tps7a7850pwpr-hero.glb",
      "model_3d_plain": "tps7a7850pwpr-etched.glb",
      "model_3d_step": "tps7a7850pwpr-etched.step",
      "model_3d_step_plain": "tps7a7850pwpr.step",
      "lbr": "tps7a7850pwpr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2879388",
      "digikey": "296-TPS7A7850PWPRTR-ND",
      "mouser": "595-TPS7A7850PWPR"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T15:43:31Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-TPS7A7850PWPRTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS7A7850PWPR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SC1-",
        "type": "passive",
        "description": "Negative terminal of the switched-capacitor voltage-reduction stage; connect a minimum 1-µF, X5R (or better), 16-V-rated capacitor between this pin and SC1+."
      },
      {
        "number": "2",
        "name": "SC1+",
        "type": "passive",
        "description": "Positive terminal of the switched-capacitor voltage-reduction stage; connect a minimum 1-µF, X5R (or better), 16-V-rated capacitor between this pin and SC1-."
      },
      {
        "number": "3",
        "name": "SCIN",
        "type": "power_in",
        "description": "Rectified DC-voltage input pin; place the bulk capacitor as close to the device as possible."
      },
      {
        "number": "4",
        "name": "PFD",
        "type": "input",
        "description": "Power-failure detect analog input that compares the reference voltage to a resistor-divided VSCIN voltage to detect a VAC power failure."
      },
      {
        "number": "5",
        "name": "AC+",
        "type": "power_in",
        "description": "AC-supply line or neutral input after the cap-drop capacitor and surge resistor; either AC+ or AC- must have the cap-drop capacitor and surge resistor in series with the line."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; all device ground pins must be referenced to the same ground and connected to the thermal pad."
      },
      {
        "number": "7",
        "name": "AC-",
        "type": "power_in",
        "description": "AC-supply line or neutral input after the cap-drop capacitor and surge resistor; either AC- or AC+ must have the cap-drop capacitor and surge resistor in series with the line."
      },
      {
        "number": "8",
        "name": "LDO_OUT",
        "type": "power_out",
        "description": "Regulated DC output pin; connect a minimum 0.68-µF, X5R (or better) capacitor between this pin and the device GND pins, with a maximum CLDO_OUT of 100 µF."
      },
      {
        "number": "9",
        "name": "LDO_IN",
        "type": "power_out",
        "description": "Charge-pump output pin, internally driven and must not be driven externally; connect a minimum 0.68-µF, X5R (or better) capacitor between this pin and the device GND pins."
      },
      {
        "number": "10",
        "name": "PF",
        "type": "output",
        "description": "Open-drain power-fail indicator that goes low when VPFD is less than the VIT(PFD,FALLING) threshold; pull up through an external resistor."
      },
      {
        "number": "11",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good indicator that signals when VLDO_OUT surpasses the VIT(PG,RISING) threshold; pull up through an external resistor to VLDO_OUT or a DC rail sharing the device GND."
      },
      {
        "number": "12",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; all device ground pins must be referenced to the same ground and connected to the thermal pad."
      },
      {
        "number": "13",
        "name": "SC2+",
        "type": "passive",
        "description": "Positive terminal of the switched-capacitor voltage-reduction stage; connect a minimum 1-µF, X5R (or better), 10-V-rated capacitor between this pin and SC2-."
      },
      {
        "number": "14",
        "name": "SC2-",
        "type": "passive",
        "description": "Negative terminal of the switched-capacitor voltage-reduction stage; connect a minimum 1-µF, X5R (or better), 10-V-rated capacitor between this pin and SC2+."
      },
      {
        "number": "15",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Datasheet pin-type column shows an em dash for SC1-, SC1+, SCIN, LDO_IN, SC2+ and SC2-. Types were a; The exposed thermal pad is listed in the datasheet as a pad, not a numbered pin, so it is not includ; Pin descriptions for pins 10 and 11 span the page 3 to page 4 break; source_page is set to the page "
        ],
        "pages_sent": 9,
        "cost_usd": 0.0228,
        "at": "2026-10-28T15:43:22"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps7a78",
        "pages": 40,
        "sha256": "c7082dade63e2c4c",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 15,
        "described": 15,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps7a7850pwpr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.35,
          5.0,
          1.05
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e73930af88609deacee2bde98223bb9da2411f0cebb494015de765f0df216789",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps7a7850pwpr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.35,
          5.0,
          1.05
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f112e4923886b34f187897e320a71a31728a9695aebdbcad4dc662d6b9f15288",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}