main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps7a7850pwpr: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tps7a7850pwpr-etched.glb Publish 0.1.0 · Ray
tps7a7850pwpr-etched.step tps7a7850pwpr: factory component page (tier=mfr) · Ray
tps7a7850pwpr-hero.glb tps7a7850pwpr: hero GLB from the etched model (keeps the MPN mark) · Ray
tps7a7850pwpr-hero.overlay.json Publish 0.1.0 · Ray
tps7a7850pwpr.glb Publish 0.1.0 · Ray
tps7a7850pwpr.kicad_mod Publish 0.1.0 · Ray
tps7a7850pwpr.kicad_sym Publish 0.1.0 · Ray
tps7a7850pwpr.lbr Publish 0.1.0 · Ray
tps7a7850pwpr.step Publish 0.1.0 · Ray

TPS7A7850PWPR

Texas Instruments · Linear Voltage Regulators (LDO) · HTSSOP-14-EP

TPS7A7850PWPR from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SC1- passive Negative terminal of the switched-capacitor voltage-reduction stage; connect a minimum 1-µF, X5R (or better), 16-V-rated capacitor between this pin and SC1+.
2 SC1+ passive Positive terminal of the switched-capacitor voltage-reduction stage; connect a minimum 1-µF, X5R (or better), 16-V-rated capacitor between this pin and SC1-.
3 SCIN power_in Rectified DC-voltage input pin; place the bulk capacitor as close to the device as possible.
4 PFD input Power-failure detect analog input that compares the reference voltage to a resistor-divided VSCIN voltage to detect a VAC power failure.
5 AC+ power_in AC-supply line or neutral input after the cap-drop capacitor and surge resistor; either AC+ or AC- must have the cap-drop capacitor and surge resistor in series with the line.
6 GND power_in Ground pin; all device ground pins must be referenced to the same ground and connected to the thermal pad.
7 AC- power_in AC-supply line or neutral input after the cap-drop capacitor and surge resistor; either AC- or AC+ must have the cap-drop capacitor and surge resistor in series with the line.
8 LDO_OUT power_out Regulated DC output pin; connect a minimum 0.68-µF, X5R (or better) capacitor between this pin and the device GND pins, with a maximum CLDO_OUT of 100 µF.
9 LDO_IN power_out Charge-pump output pin, internally driven and must not be driven externally; connect a minimum 0.68-µF, X5R (or better) capacitor between this pin and the device GND pins.
10 PF output Open-drain power-fail indicator that goes low when VPFD is less than the VIT(PFD,FALLING) threshold; pull up through an external resistor.
11 PG output Open-drain power-good indicator that signals when VLDO_OUT surpasses the VIT(PG,RISING) threshold; pull up through an external resistor to VLDO_OUT or a DC rail sharing the device GND.
12 GND power_in Ground pin; all device ground pins must be referenced to the same ground and connected to the thermal pad.
13 SC2+ passive Positive terminal of the switched-capacitor voltage-reduction stage; connect a minimum 1-µF, X5R (or better), 10-V-rated capacitor between this pin and SC2-.
14 SC2- passive Negative terminal of the switched-capacitor voltage-reduction stage; connect a minimum 1-µF, X5R (or better), 10-V-rated capacitor between this pin and SC2+.
15 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-14-EP
Category Power Supply Chip
Pins 15

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
AC+, AC- voltage (VAC supply mode only) -1.5 30 V VAC supply mode only 4
SCIN voltage (VAC supply mode only, internally driven) -1.5 30 V VAC supply mode only, internally driven 4
SCIN voltage (DC supply mode only) -0.3 24 V DC supply mode only, voltage directly applied on SCIN pin 4
LDO_OUT voltage -0.3 5.5 V 4
PF, PG voltage -0.3 6 V 4
PFD voltage -0.3 3 V 4
LDO_OUT pin reverse current 6 mA 4
Maximum output current IPF, IPG IPF, IPG 5 mA 4
Storage temperature TSTG -65 150 °C 4
VAC supply voltage VAC 18 VRMS Connected via CS and RS on either AC+ or AC- 5
Line frequency fAC 50 20000 Hz 5
Peak transient current into or out of AC+ or AC- pins ISURGE 2.5 A During hot plug for <=100 µs 5
AC current during shunt event on AC+ or AC- pins ISHUNT 200 mARMS 5
Bulk capacitor for VAC supply mode CSCIN 22 µF VAC supply mode 5
Switched-capacitor stage 1 capacitor CSC1 1 4.7 µF 16 V or higher rating recommended 5
Switched-capacitor stage 2 capacitor CSC2 1 4.7 µF 10 V or higher rating recommended 5
LDO_IN capacitor CLDO_IN 0.68 10 1000 µF 5
LDO_OUT capacitor CLDO_OUT 0.68 1 100 µF 5
PFD top resistor divider R1 0 200 kΩ 5
Power-good and power-fail pullup resistors R3, R4 10 100 kΩ 5
Output current IOUT 0 120 mA 5
Operating junction temperature TJ -40 125 °C 5
Junction-to-ambient thermal resistance RθJA 48 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 44 °C/W 5
Junction-to-board thermal resistance RθJB 24.2 °C/W 5
Junction-to-top characterization parameter ΨJT 1.6 °C/W 5
Junction-to-board characterization parameter ΨJB 24.1 °C/W 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 7.2 °C/W 5
UVLO_LDO_IN threshold rising VUVLO_LDO_IN 3.9 V VSCIN rising 6
UVLO_LDO_IN threshold falling VUVLO_LDO_IN 3.5 V VSCIN falling 6
Load regulation ΔVLDO_OUT(ΔIOUT) 0.21 mV/mA 0 mA <= IOUT <= 120 mA 6
Output voltage accuracy VLDO_OUT -2 1 2 % VSCIN = 4(VLDO_OUT(nom)+0.6 V)+3 V, 0 mA <= IOUT <= 120 mA 6
Output current limit ICL 145 215 300 mA VLDO_OUT = 0.9 x VLDO_OUT(nom) 6
Output voltage ripple VRipple 3 mV VAC = 120 V, 60 Hz, FB, CS = 1.0 µF, CSCIN = 180 µF, VLDO_OUT(nom) = 5 V, IOUT = 10 mA, scope BW = 10 MHz 6
PFD pin rising threshold VIT(PFD,RISING) 1.24 1.42 V VPFD rising, R4 = 100 kΩ 6
PFD pin falling threshold VIT(PFD,FALLING) 1.17 1.25 V VPFD falling, R4 = 100 kΩ 6
PFD pin hysteresis VHYS(PFD) 110 mV 6
PG pin rising threshold VIT(PG,RISING) 90.16 92 93.84 %VLDO_OUT R3 = 100 kΩ, VSCIN rising 6
PG pin falling threshold VIT(PG,FALLING) 88.5 90 91.5 %VLDO_OUT R3 = 100 kΩ 6
PG pin hysteresis VHYS(PG) 2 %VLDO_OUT 6
PF and PG pins low-level output voltage VOL(PF),(PG) 0.2 V IPF,PG = 500 µA 6
PF and PG pins open-drain leakage current ILKG(PF),(PG) 50 nA VPF,PG = 5 V 6
Thermal shutdown temperature TSD(Shutdown) 162 °C Shutdown, temperature increasing 6
Thermal shutdown reset temperature TSD(Reset) 135 °C Reset, temperature decreasing 6
PF pin high-to-low time tPF(HL) 1 µs PF pin going from high to low 6
PG pin low-to-high time tPG(LH) 1 µs PG pin going from low to high 6
Switched capacitor stage operating frequency fSC 200 kHz 6

CAD (KiCad official)

  • Symbol: TPS7A7850PWPR
  • Footprint: Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
  • 3D model files: tps7a7850pwpr-etched.step / tps7a7850pwpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7a7850pwpr.step / tps7a7850pwpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 c7082dade63e2c4c, retrieved 2026-10-28, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF