component
TPS7A7200RGWR
Public Made by Adomby adom
Texas Instruments Linear Voltage Regulators (LDO), VQFN-20-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/tps7a7200rgwr
9d44ccc
TPS7A7200RGWR
Texas Instruments · Linear Voltage Regulators (LDO) · VQFN-20-EP(5x5)
TPS7A7200RGWR from Texas Instruments, in a VQFN-20-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage pin; 4.7 μF minimum capacitance required for stability. |
| 2 | SNS | input | Output voltage sense input pin connected to error amplifier. |
| 3 | FB | input | Feedback input to error amplifier; 220-pF ceramic capacitor from this pin to OUT required. |
| 4 | PG | output | Open-drain active-high power-good output; indicates when VOUT reaches 90% of target. |
| 5 | 50mV | input | Voltage setting pin; ground connection increases VOUT by 50 mV, leave floating when not in use. |
| 6 | 100mV | input | Voltage setting pin; ground connection increases VOUT by 100 mV, leave floating when not in use. |
| 7 | 200mV | input | Voltage setting pin; ground connection increases VOUT by 200 mV, leave floating when not in use. |
| 8 | GND | power_in | Ground pin; must be connected to large-area ground plane. |
| 9 | 400mV | input | Voltage setting pin; ground connection increases VOUT by 400 mV, leave floating when not in use. |
| 10 | 800mV | input | Voltage setting pin; ground connection increases VOUT by 800 mV, leave floating when not in use. |
| 11 | 1.6V | input | Voltage setting pin; ground connection increases VOUT by 1.6 V, leave floating when not in use. |
| 12 | NC | unconnected | Not internally connected; pin and thermal pad must be connected to large-area ground plane. |
| 13 | SS | input | Soft-start pin; leave open for default soft start or connect external capacitor to GND for adjustable soft-start delay. |
| 14 | EN | input | Enable pin; VIH ≥ 1.1 V enables device, VIL ≤ 0.5 V disables device. |
| 15 | IN | power_in | Unregulated supply voltage input pin; input capacitor required. |
| 16 | IN | power_in | Unregulated supply voltage input pin; input capacitor required. |
| 17 | IN | power_in | Unregulated supply voltage input pin; input capacitor required. |
| 18 | GND | power_in | Ground pin; must be connected to large-area ground plane. |
| 19 | OUT | power_out | Regulated output voltage pin; 4.7 μF minimum capacitance required for stability. |
| 20 | OUT | power_out | Regulated output voltage pin; 4.7 μF minimum capacitance required for stability. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-20-EP(5x5) |
| Category | Power Supply Chip |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
TPS7A7200RGWR - Footprint:
Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm - 3D model: VQFN-20-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
tps7a7200rgwr-etched.step/tps7a7200rgwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a7200rgwr.step/tps7a7200rgwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
5cbf29e76f81c0a6, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS7A7200RGWR
**Texas Instruments** · Linear Voltage Regulators (LDO) · VQFN-20-EP(5x5)
TPS7A7200RGWR from Texas Instruments, in a VQFN-20-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage pin; 4.7 μF minimum capacitance required for stability. |
| 2 | SNS | input | Output voltage sense input pin connected to error amplifier. |
| 3 | FB | input | Feedback input to error amplifier; 220-pF ceramic capacitor from this pin to OUT required. |
| 4 | PG | output | Open-drain active-high power-good output; indicates when VOUT reaches 90% of target. |
| 5 | 50mV | input | Voltage setting pin; ground connection increases VOUT by 50 mV, leave floating when not in use. |
| 6 | 100mV | input | Voltage setting pin; ground connection increases VOUT by 100 mV, leave floating when not in use. |
| 7 | 200mV | input | Voltage setting pin; ground connection increases VOUT by 200 mV, leave floating when not in use. |
| 8 | GND | power_in | Ground pin; must be connected to large-area ground plane. |
| 9 | 400mV | input | Voltage setting pin; ground connection increases VOUT by 400 mV, leave floating when not in use. |
| 10 | 800mV | input | Voltage setting pin; ground connection increases VOUT by 800 mV, leave floating when not in use. |
| 11 | 1.6V | input | Voltage setting pin; ground connection increases VOUT by 1.6 V, leave floating when not in use. |
| 12 | NC | unconnected | Not internally connected; pin and thermal pad must be connected to large-area ground plane. |
| 13 | SS | input | Soft-start pin; leave open for default soft start or connect external capacitor to GND for adjustable soft-start delay. |
| 14 | EN | input | Enable pin; VIH ≥ 1.1 V enables device, VIL ≤ 0.5 V disables device. |
| 15 | IN | power_in | Unregulated supply voltage input pin; input capacitor required. |
| 16 | IN | power_in | Unregulated supply voltage input pin; input capacitor required. |
| 17 | IN | power_in | Unregulated supply voltage input pin; input capacitor required. |
| 18 | GND | power_in | Ground pin; must be connected to large-area ground plane. |
| 19 | OUT | power_out | Regulated output voltage pin; 4.7 μF minimum capacitance required for stability. |
| 20 | OUT | power_out | Regulated output voltage pin; 4.7 μF minimum capacitance required for stability. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-20-EP(5x5) |
| Category | Power Supply Chip |
| Pins | 21 |
## CAD (KiCad official)
- Symbol: `TPS7A7200RGWR`
- Footprint: `Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm`
- 3D model: VQFN-20-EP(5x5) (KiCad packages3D, STEP)
- 3D model files: `tps7a7200rgwr-etched.step` / `tps7a7200rgwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps7a7200rgwr.step` / `tps7a7200rgwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps7a7200) (43 pp, sha256 `5cbf29e76f81c0a6`, retrieved 2026-09-24, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps7a7200rgwr-datasheet.pdf)