TPS7A6050QKTTRQ1

{
  "slug": "tps7a6050qkttrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps7a6050qkttrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps7a6050qkttrq1.kicad_sym",
    "tps7a6050qkttrq1.kicad_mod",
    "tps7a6050qkttrq1.glb",
    "tps7a6050qkttrq1.step",
    "tps7a6050qkttrq1.lbr",
    "docs/hero.png",
    "docs/tps7a6050qkttrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps7a6050qkttrq1-hero.glb",
    "tps7a6050qkttrq1-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS7A6050QKTTRQ1",
    "manufacturer": "Texas Instruments",
    "package": "TO-263-5",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps7a61-q1",
    "parts": {
      "symbol": "tps7a6050qkttrq1.kicad_sym",
      "footprint": "tps7a6050qkttrq1.kicad_mod",
      "model_3d": "tps7a6050qkttrq1-hero.glb",
      "model_3d_plain": "tps7a6050qkttrq1.glb",
      "model_3d_step": "tps7a6050qkttrq1-etched.step",
      "model_3d_step_plain": "tps7a6050qkttrq1.step",
      "lbr": "tps7a6050qkttrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C202282",
      "digikey": "296-27206-2-ND",
      "mouser": "595-TPS7A6050QKTTRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T01:11:08Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-27206-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS7A6050QKTTRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Unregulated input voltage pin, which should have a bypass capacitor to GND to dampen input line transients; the datasheet gives a recommended VIN of 7 V to 40 V and an absolute maximum of 45 V (transient, under 480 ms)."
      },
      {
        "number": "2",
        "name": "nRST",
        "type": "output",
        "description": "Open-drain reset output that requires an external pullup resistor to VOUT; the absolute maximum rating is -0.3 V to 7 V."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Signal-ground pin of the IC, which is also the return for the input bypass capacitor and the output capacitor COUT."
      },
      {
        "number": "4",
        "name": "RDELAY",
        "type": "output",
        "description": "Reset delay timer pin for TPS7A60-Q1 only, programmed by an external capacitor CDLY to ground; the absolute maximum rating is -0.3 V to 7 V and the low-voltage output range is 0 V to 5.25 V."
      },
      {
        "number": "5",
        "name": "VOUT",
        "type": "power_out",
        "description": "Regulated 5 V output (for this 5 V device) with a limit on maximum output current of 300 mA; a low-ESR external capacitor COUT must be connected between this pin and GND for stable operation."
      },
      {
        "number": "6",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 4 is labeled 'ENABLE, RDELAY' on the pinout drawing and table. The MPN TPS7A6050 is the TPS7A60 ; The KTT package has an exposed thermal pad that is not given a pin number in the text. The datasheet; The orderable part is TPS7A6050QKTTRQ1 and the datasheet title uses TPS7A60-Q1. The ordering addendu",
          "exposed pad 6 added from the footprint"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0594,
        "at": "2026-10-08T01:10:49"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps7a61-q1",
        "pages": 36,
        "sha256": "e95579ec81481585",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps7a6050qkttrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          15.0,
          10.0,
          4.42
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "94c2a3dc1aaad85b6b5193f97d9a7c61b4e28bac25952a1e629557bcf747e246",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps7a6050qkttrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          15.0,
          10.0,
          4.42
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2ef5f252e2fbdb9d9e2857960e121b6cb80b696ff982dd321f5fa7d6986b970f",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}