main
History Download
Ray Publish 0.1.0 dc0a8f9

TPS7A4101DGNT

Texas Instruments · Integrated Circuits (ICs) · Texas_DGN0008B_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x3mm_Mask1.88x1.98mm

TPS7A4101DGNT from Texas Instruments, in a Texas_DGN0008B_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x3mm_Mask1.88x1.98mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulator output; a capacitor greater than 4.7 uF to ground assures stability
2 FB input Input to the control-loop error amplifier; sets the output voltage
3 NC unconnected Not internally connected; leave open or tie to GND
4 GND power_in Ground
5 EN input Turns the regulator on or off; connect to IN if unused
6 NC unconnected Not internally connected; leave open or tie to GND
7 NC unconnected Not internally connected; leave open or tie to GND
8 IN power_in Input supply
9 PowerPAD passive Exposed pad: solder to the PCB for thermal performance; internally connected to GND (TI recommends connecting it to the GND plane)

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package Texas_DGN0008B_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x3mm_Mask1.88x1.98mm
Category Integrated Circuits (ICs)
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
IN pin to GND pin -0.3 60 V 3
OUT pin to GND pin -0.3 60 V 3
OUT pin to IN pin -60 0.3 V 3
FB pin to GND pin -0.3 2 V 3
FB pin to IN pin -60 0.3 V 3
EN pin to IN pin -60 0.3 V 3
EN pin to GND pin -0.3 60 V 3
Operating junction temperature TJ TJ -40 125 °C 3
Storage temperature Tstg Tstg -65 150 °C 3
Input voltage VIN 7 50 V 4
Output voltage VOUT 1.161 48 V 4
Enable pin voltage VEN 0 50 V 4
Output current IOUT 0 50 mA 4
Input voltage range VIN 7 50 V 5
Internal reference VREF 1.161 1.173 1.185 V TJ = 25°C, VFB = VREF, VIN = 9 V, IOUT = 25 mA 5
Output voltage range VOUT 48 V VIN ≥ VOUT(NOM) + 2 V 5
Nominal accuracy -1 1 %VOUT TJ = 25°C, VIN = 9 V, IOUT = 25 mA 5
Overall accuracy -2.5 2.5 %VOUT VOUT(NOM) + 2 V ≤ VIN ≤ 24 V; 100 µA ≤ IOUT ≤ 50 mA 5
Dropout voltage VDO 0.78 1.3 V VIN = 17 V, VOUT(NOM) = 18 V, IOUT = 50 mA 5
Current limit ILIM 51 117 200 mA VOUT = 90% VOUT(NOM), VIN = 7 V, TJ ≤ 85°C 5
Current limit ILIM 51 128 200 mA VOUT = 90% VOUT(NOM), VIN = 9 V 5
Ground current IGND 25 65 µA 7 V ≤ VIN ≤ 50 V, IOUT = 0 mA 5
Shutdown supply current ISHDN 4.1 20 µA VEN = 0.4 V 5
Feedback current IFB -0.1 0.01 0.1 µA 5
Enable current IEN 0.02 1 µA 7 V ≤ VIN ≤ 50 V, VIN = VEN 5
Enable high-level voltage VEN_HI 1.5 V 5
Enable low-level voltage VEN_LO 0 0.4 V 5
Junction-to-ambient thermal resistance RθJA 66.7 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 54.1 °C/W 4
Junction-to-board thermal resistance RθJB 38.1 °C/W 4
Junction-to-top characterization parameter ψJT 2 °C/W 4
Junction-to-board characterization parameter ψJB 37.8 °C/W 4
Junction-to-case (bottom) thermal resistance RθJC(bot) 15.5 °C/W 4

CAD (KiCad official)

  • Symbol: TPS7A4101DGNT
  • Footprint: Package_SO:Texas_DGN0008B_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x3mm_Mask1.88x1.98mm
  • 3D model: Texas_DGN0008B_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x3mm_Mask1.88x1.98mm, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.0 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps7a4101dgnt-etched.step / tps7a4101dgnt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7a4101dgnt.step / tps7a4101dgnt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 2f6f35a2e0452660, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0). Land: footprint: KiCad Texas_DGN0008B_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x3mm_Mask1.88x1.98mm, checked against datasheet pitch/body/pin count/ep/drawing (outline drawing DGN0008B; pitch 0.65 mm; body 3.0 x 3.0 mm; 9 terminals; exposed pad 1.88 x 1.75 mm, p.20).

Datasheet PDF