Generated by kicad-footprint-generator · KiCad file format 20260206
TPS7A4101DGNT
Texas Instruments · Integrated Circuits (ICs) · Texas_DGN0008B_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x3mm_Mask1.88x1.98mm
TPS7A4101DGNT from Texas Instruments, in a Texas_DGN0008B_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x3mm_Mask1.88x1.98mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulator output; a capacitor greater than 4.7 uF to ground assures stability |
| 2 | FB | input | Input to the control-loop error amplifier; sets the output voltage |
| 3 | NC | unconnected | Not internally connected; leave open or tie to GND |
| 4 | GND | power_in | Ground |
| 5 | EN | input | Turns the regulator on or off; connect to IN if unused |
| 6 | NC | unconnected | Not internally connected; leave open or tie to GND |
| 7 | NC | unconnected | Not internally connected; leave open or tie to GND |
| 8 | IN | power_in | Input supply |
| 9 | PowerPAD | passive | Exposed pad: solder to the PCB for thermal performance; internally connected to GND (TI recommends connecting it to the GND plane) |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | Texas_DGN0008B_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x3mm_Mask1.88x1.98mm |
| Category | Integrated Circuits (ICs) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| IN pin to GND pin | -0.3 | 60 | V | 3 | |||
| OUT pin to GND pin | -0.3 | 60 | V | 3 | |||
| OUT pin to IN pin | -60 | 0.3 | V | 3 | |||
| FB pin to GND pin | -0.3 | 2 | V | 3 | |||
| FB pin to IN pin | -60 | 0.3 | V | 3 | |||
| EN pin to IN pin | -60 | 0.3 | V | 3 | |||
| EN pin to GND pin | -0.3 | 60 | V | 3 | |||
| Operating junction temperature TJ | TJ | -40 | 125 | °C | 3 | ||
| Storage temperature Tstg | Tstg | -65 | 150 | °C | 3 | ||
| Input voltage | VIN | 7 | 50 | V | 4 | ||
| Output voltage | VOUT | 1.161 | 48 | V | 4 | ||
| Enable pin voltage | VEN | 0 | 50 | V | 4 | ||
| Output current | IOUT | 0 | 50 | mA | 4 | ||
| Input voltage range | VIN | 7 | 50 | V | 5 | ||
| Internal reference | VREF | 1.161 | 1.173 | 1.185 | V | TJ = 25°C, VFB = VREF, VIN = 9 V, IOUT = 25 mA | 5 |
| Output voltage range | VOUT | 48 | V | VIN ≥ VOUT(NOM) + 2 V | 5 | ||
| Nominal accuracy | -1 | 1 | %VOUT | TJ = 25°C, VIN = 9 V, IOUT = 25 mA | 5 | ||
| Overall accuracy | -2.5 | 2.5 | %VOUT | VOUT(NOM) + 2 V ≤ VIN ≤ 24 V; 100 µA ≤ IOUT ≤ 50 mA | 5 | ||
| Dropout voltage | VDO | 0.78 | 1.3 | V | VIN = 17 V, VOUT(NOM) = 18 V, IOUT = 50 mA | 5 | |
| Current limit | ILIM | 51 | 117 | 200 | mA | VOUT = 90% VOUT(NOM), VIN = 7 V, TJ ≤ 85°C | 5 |
| Current limit | ILIM | 51 | 128 | 200 | mA | VOUT = 90% VOUT(NOM), VIN = 9 V | 5 |
| Ground current | IGND | 25 | 65 | µA | 7 V ≤ VIN ≤ 50 V, IOUT = 0 mA | 5 | |
| Shutdown supply current | ISHDN | 4.1 | 20 | µA | VEN = 0.4 V | 5 | |
| Feedback current | IFB | -0.1 | 0.01 | 0.1 | µA | 5 | |
| Enable current | IEN | 0.02 | 1 | µA | 7 V ≤ VIN ≤ 50 V, VIN = VEN | 5 | |
| Enable high-level voltage | VEN_HI | 1.5 | V | 5 | |||
| Enable low-level voltage | VEN_LO | 0 | 0.4 | V | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 66.7 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 54.1 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 38.1 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 2 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 37.8 | °C/W | 4 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 15.5 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
TPS7A4101DGNT - Footprint:
Package_SO:Texas_DGN0008B_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x3mm_Mask1.88x1.98mm - 3D model: Texas_DGN0008B_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x3mm_Mask1.88x1.98mm, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.0 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps7a4101dgnt-etched.step/tps7a4101dgnt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a4101dgnt.step/tps7a4101dgnt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
2f6f35a2e0452660, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0). Land: footprint: KiCad Texas_DGN0008B_VSSOP-8-1EP_3x3mm_P0.65mm_EP2x3mm_Mask1.88x1.98mm, checked against datasheet pitch/body/pin count/ep/drawing (outline drawing DGN0008B; pitch 0.65 mm; body 3.0 x 3.0 mm; 9 terminals; exposed pad 1.88 x 1.75 mm, p.20).