component
TPS7A3001DGNR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HVSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS7A3001DGNR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · HVSSOP-8
TPS7A3001DGNR from Texas Instruments, in a HVSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Regulator output; a capacitor ≥ 2.2 µF must be tied from this pin to ground to ensure stability. |
| 2 | FB | input | Feedback pin that sets the output voltage of the device. |
| 3 | NC | unconnected | Not internally connected; this pin must either be left open or tied to GND. |
| 4 | GND | power_in | Ground. |
| 5 | EN | input | Enable pin that turns the regulator on or off; regulator is enabled if VEN ≥ VEN(+HI,min) or VEN ≤ VEN(-HI,max), and disabled if VEN(+LO,max) ≥ VEN ≥ VEN(-LO,min); can be tied to IN if unused, with |
| 6 | NR/SS | passive | Noise-reduction/soft-start pin; an external capacitor connected here filters internal band-gap noise to reduce output RMS noise and also programs the soft-start ramp time. |
| 7 | DNC | unconnected | Do not connect; do not route this pin to any electrical net, not even GND or IN. |
| 8 | IN | power_in | Input supply, -3 V to -35 V. |
| 9 | PowerPAD | power_in | Exposed thermal pad; must either be left open or tied to GND, and should be soldered to a PCB ground plane to enhance thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TPS7A3001DGNR - Footprint:
Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm - 3D model: HVSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal HVSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps7a3001dgnr-etched.step/tps7a3001dgnr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a3001dgnr.step/tps7a3001dgnr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
b60d6fd8d7220e9f, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).