main
Ray tps7a1650dgnr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 3153a08
{
  "slug": "tps7a1650dgnr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps7a1650dgnr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps7a1650dgnr.kicad_sym",
    "tps7a1650dgnr.kicad_mod",
    "tps7a1650dgnr.glb",
    "tps7a1650dgnr.step",
    "tps7a1650dgnr.lbr",
    "docs/hero.png",
    "docs/tps7a1650dgnr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TPS7A1650DGNR",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-8-EP",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps7a16",
    "parts": {
      "symbol": "tps7a1650dgnr.kicad_sym",
      "footprint": "tps7a1650dgnr.kicad_mod",
      "model_3d": "tps7a1650dgnr-etched.glb",
      "model_3d_plain": "tps7a1650dgnr.glb",
      "model_3d_step": "tps7a1650dgnr-etched.step",
      "model_3d_step_plain": "tps7a1650dgnr.step",
      "lbr": "tps7a1650dgnr.lbr"
    },
    "distributor_links": {
      "lcsc": "C468238"
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulator output pin; requires a capacitor ≥2.2 µF to GND for stability (10 µF ceramic recommended for best AC performance)."
      },
      {
        "number": "2",
        "name": "FB/DNC",
        "type": "unconnected",
        "description": "For the fixed-output TPS7A1650, this pin must not be connected to any electrical net, including GND or IN."
      },
      {
        "number": "3",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output; pulls low when VOUT falls below the PG trip threshold, otherwise high-impedance; leave open or tie to GND if unused."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Enable pin; regulator is enabled when VEN ≥ VEN_HI and disabled when VEN ≤ VEN_LO; can be tied to IN if unused (VEN ≤ VIN at all times)."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; may be left open or tied to any voltage between GND and IN."
      },
      {
        "number": "7",
        "name": "DELAY",
        "type": "output",
        "description": "Delay pin; connect a capacitor to GND to set the programmable power-good delay time, or leave open if the reset/delay function is not needed."
      },
      {
        "number": "8",
        "name": "IN",
        "type": "power_in",
        "description": "Regulator input supply pin; requires a capacitor ≥0.1 µF to GND for stability (10 µF ceramic recommended to reduce PCB layout sensitivity)."
      },
      {
        "number": "9",
        "name": "PowerPAD",
        "type": "power_in",
        "description": "Exposed thermal pad; should be soldered to the PCB and connected to the GND plane to enhance thermal performance (can be left floating but TI highly recommends GND connection)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: FB/DNC pin (PIN 2) must not be connected for TPS7A1650 fixed-voltage variant; datasheet explicitly s",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 37,
        "cost_usd": 0.3349,
        "at": "2026-09-24T07:44:58"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps7a16",
        "pages": 37,
        "sha256": "180ec3f485b2772b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps7a1650dgnr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.96
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "43252be3beac8fd30ca9bfeb82a613fa01d5dffff9b22810c13a4655daafb5ee",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps7a1650dgnr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.96
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "95861390528985131c025882e487cbf34139fce8c37eb0985dd808b786ab2dc5",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}