main
Ray Publish 0.1.0 ddc7ca9

TPS7A0522PDBZR

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-3

TPS7A0522PDBZR from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin that must be connected to ground on the board.
2 OUT power_out Regulated output pin that requires a capacitor to ground for stability, using the recommended 0.47 µF minimum (1 µF nominal) or larger ceramic capacitor placed as close to the device as possible.
3 IN power_in Input supply pin (1.4 V to 5.5 V) that should have the recommended 1 µF or larger ceramic capacitor to ground placed as close to the device as possible.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-3
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Nominal accuracy VOUT -1 1 % VOUT ≥ 1.0 V, TJ = 25°C 7
Accuracy over temperature VOUT -2 2 % VOUT ≥ 1.0 V, TJ = -40°C to +85°C 7
Accuracy over temperature VOUT -3 3 % VOUT ≥ 1.0 V 7
Line regulation ΔVOUT(ΔVIN) 5 16.5 mV VOUT(nom) + 0.5 V ≤ VIN ≤ 5.5 V, TJ = -40°C to +85°C 7
Line regulation ΔVOUT(ΔVIN) 18 mV VOUT(nom) + 0.5 V ≤ VIN ≤ 5.5 V 7
Load regulation DBZ ΔVOUT(ΔIOUT) 27 50 mV 100 μA ≤ IOUT ≤ 200 mA, VIN = VOUT(nom) + VDO(max) + 0.1 V, TJ = -40°C to +85°C 7
Load regulation DBZ ΔVOUT(ΔIOUT) 62 mV 100 μA ≤ IOUT ≤ 200 mA, VIN = VOUT(nom) + VDO(max) + 0.1 V 7
Ground current IGND 0.6 1 1.3 µA TJ = 25°C, IOUT = 1 µA 7
Ground current IGND 2 µA IOUT = 1 µA, TJ = -40°C to +85°C 7
Ground current IGND 3 µA IOUT = 1 µA 7
Shutdown current ISHDN 100 300 nA VEN = 0.4 V, 1.4 V ≤ VIN ≤ 5.5 V, TJ = 25°C 7
Output current limit ICL 210 450 700 mA VOUT = 90% × VOUT(nom), VIN = VOUT(nom) + VDO(max) + 0.5 V 7
Output current limit ICL 250 450 700 mA VOUT = 90% × VOUT(nom), VIN = VOUT(nom) + VDO(max) + 0.5 V, TJ = 0°C to +85°C 7
Short-circuit current limit ISC 65 150 mA VOUT = 0 V 7
Dropout voltage DBZ VDO 351 mV IOUT = 200 mA, TJ = -40°C to +85°C, DBZ Package, 1.8 V ≤ VOUT < 2.5 V 8
Dropout voltage DBZ VDO 392 mV IOUT = 200 mA, DBZ Package, 1.8 V ≤ VOUT < 2.5 V 8
UVLO threshold rising VUVLO 1.21 1.3 1.37 V VIN rising 8
UVLO threshold falling VUVLO 1.17 1.33 V VIN falling 8
EN pin logic high voltage VEN(HI) 0.9 V 8
EN pin logic low voltage VEN(LO) 0.4 V 8
EN pin current IEN 10 nA VEN = VIN = 5.5 V 8
Start-up time tSTR 1.5 2.8 ms From EN assertion to VOUT = 95% × VOUT(nom), VOUT = 1.8 V 9
UVLO hysteresis VUVLO(HYST) 40 mV VIN falling 8
PSRR PSRR 40 dB f = 1 kHz, IOUT = 30 mA 8
PSRR PSRR 30 dB f = 500 kHz, IOUT = 30 mA 8
Output voltage noise VN 180 µVRMS BW = 10 Hz to 100 kHz, VOUT = 1.2 V, IOUT = 30 mA 8
Pulldown resistor RPULLDOWN 120 Ω VIN = 3.3 V, P version only 8
Thermal shutdown temperature Tsd 160 °C Shutdown, temperature increasing 8
Thermal shutdown reset temperature Tsd 140 °C Reset, temperature decreasing 8
Input supply voltage VIN 1.4 5.5 V 6
Enable supply voltage VEN 0 V max is VIN 6
Output current IOUT 0 200 mA 10 µA minimum required to meet output voltage accuracy 6
Input capacitor CIN 1 µF 6
Output capacitor COUT 0.47 1 22 µF 6
Operating junction temperature TJ -40 125 °C 6
Abs max IN voltage VIN -0.3 6 V with respect to GND 6
Abs max EN voltage VEN -0.3 V max VIN + 0.3 V 6
Abs max OUT voltage VOUT -0.3 V max VIN + 0.3 or 3.6 (whichever is smaller) 6
Operating junction temperature TJ -40 125 °C 6
Storage temperature Tstg -65 150 °C 6
ESD HBM V(ESD) -1000 1000 V Human-body model, ANSI/ESDA/JEDEC JS-001 6
ESD CDM V(ESD) -500 500 V Charged-device model, JESD22-C101 6
Junction-to-ambient thermal resistance RθJA 267.3 °C/W DBZ (SOT-23), 3 pins 6
Junction-to-case (top) thermal resistance RθJC(top) 103.5 °C/W DBZ (SOT-23), 3 pins 6
Junction-to-board thermal resistance RθJB 98 °C/W DBZ (SOT-23), 3 pins 6
Junction-to-top characterization parameter ΨJT 9.2 °C/W DBZ (SOT-23), 3 pins 6
Junction-to-board characterization parameter YJB 97.4 °C/W DBZ (SOT-23), 3 pins 6

CAD (KiCad official)

  • Symbol: TPS7A0522PDBZR
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3 (KiCad packages3D, STEP)
  • 3D model files: tps7a0522pdbzr-etched.step / tps7a0522pdbzr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps7a0522pdbzr.step / tps7a0522pdbzr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (55 pp, sha256 7b50504c32f5a27d, retrieved 2026-10-27, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF