Generated by kicad-footprint-generator · KiCad file format 20260206
TPS7A0522PDBZR
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-3
TPS7A0522PDBZR from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin that must be connected to ground on the board. |
| 2 | OUT | power_out | Regulated output pin that requires a capacitor to ground for stability, using the recommended 0.47 µF minimum (1 µF nominal) or larger ceramic capacitor placed as close to the device as possible. |
| 3 | IN | power_in | Input supply pin (1.4 V to 5.5 V) that should have the recommended 1 µF or larger ceramic capacitor to ground placed as close to the device as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Nominal accuracy | VOUT | -1 | 1 | % | VOUT ≥ 1.0 V, TJ = 25°C | 7 | |
| Accuracy over temperature | VOUT | -2 | 2 | % | VOUT ≥ 1.0 V, TJ = -40°C to +85°C | 7 | |
| Accuracy over temperature | VOUT | -3 | 3 | % | VOUT ≥ 1.0 V | 7 | |
| Line regulation | ΔVOUT(ΔVIN) | 5 | 16.5 | mV | VOUT(nom) + 0.5 V ≤ VIN ≤ 5.5 V, TJ = -40°C to +85°C | 7 | |
| Line regulation | ΔVOUT(ΔVIN) | 18 | mV | VOUT(nom) + 0.5 V ≤ VIN ≤ 5.5 V | 7 | ||
| Load regulation DBZ | ΔVOUT(ΔIOUT) | 27 | 50 | mV | 100 μA ≤ IOUT ≤ 200 mA, VIN = VOUT(nom) + VDO(max) + 0.1 V, TJ = -40°C to +85°C | 7 | |
| Load regulation DBZ | ΔVOUT(ΔIOUT) | 62 | mV | 100 μA ≤ IOUT ≤ 200 mA, VIN = VOUT(nom) + VDO(max) + 0.1 V | 7 | ||
| Ground current | IGND | 0.6 | 1 | 1.3 | µA | TJ = 25°C, IOUT = 1 µA | 7 |
| Ground current | IGND | 2 | µA | IOUT = 1 µA, TJ = -40°C to +85°C | 7 | ||
| Ground current | IGND | 3 | µA | IOUT = 1 µA | 7 | ||
| Shutdown current | ISHDN | 100 | 300 | nA | VEN = 0.4 V, 1.4 V ≤ VIN ≤ 5.5 V, TJ = 25°C | 7 | |
| Output current limit | ICL | 210 | 450 | 700 | mA | VOUT = 90% × VOUT(nom), VIN = VOUT(nom) + VDO(max) + 0.5 V | 7 |
| Output current limit | ICL | 250 | 450 | 700 | mA | VOUT = 90% × VOUT(nom), VIN = VOUT(nom) + VDO(max) + 0.5 V, TJ = 0°C to +85°C | 7 |
| Short-circuit current limit | ISC | 65 | 150 | mA | VOUT = 0 V | 7 | |
| Dropout voltage DBZ | VDO | 351 | mV | IOUT = 200 mA, TJ = -40°C to +85°C, DBZ Package, 1.8 V ≤ VOUT < 2.5 V | 8 | ||
| Dropout voltage DBZ | VDO | 392 | mV | IOUT = 200 mA, DBZ Package, 1.8 V ≤ VOUT < 2.5 V | 8 | ||
| UVLO threshold rising | VUVLO | 1.21 | 1.3 | 1.37 | V | VIN rising | 8 |
| UVLO threshold falling | VUVLO | 1.17 | 1.33 | V | VIN falling | 8 | |
| EN pin logic high voltage | VEN(HI) | 0.9 | V | 8 | |||
| EN pin logic low voltage | VEN(LO) | 0.4 | V | 8 | |||
| EN pin current | IEN | 10 | nA | VEN = VIN = 5.5 V | 8 | ||
| Start-up time | tSTR | 1.5 | 2.8 | ms | From EN assertion to VOUT = 95% × VOUT(nom), VOUT = 1.8 V | 9 | |
| UVLO hysteresis | VUVLO(HYST) | 40 | mV | VIN falling | 8 | ||
| PSRR | PSRR | 40 | dB | f = 1 kHz, IOUT = 30 mA | 8 | ||
| PSRR | PSRR | 30 | dB | f = 500 kHz, IOUT = 30 mA | 8 | ||
| Output voltage noise | VN | 180 | µVRMS | BW = 10 Hz to 100 kHz, VOUT = 1.2 V, IOUT = 30 mA | 8 | ||
| Pulldown resistor | RPULLDOWN | 120 | Ω | VIN = 3.3 V, P version only | 8 | ||
| Thermal shutdown temperature | Tsd | 160 | °C | Shutdown, temperature increasing | 8 | ||
| Thermal shutdown reset temperature | Tsd | 140 | °C | Reset, temperature decreasing | 8 | ||
| Input supply voltage | VIN | 1.4 | 5.5 | V | 6 | ||
| Enable supply voltage | VEN | 0 | V | max is VIN | 6 | ||
| Output current | IOUT | 0 | 200 | mA | 10 µA minimum required to meet output voltage accuracy | 6 | |
| Input capacitor | CIN | 1 | µF | 6 | |||
| Output capacitor | COUT | 0.47 | 1 | 22 | µF | 6 | |
| Operating junction temperature | TJ | -40 | 125 | °C | 6 | ||
| Abs max IN voltage | VIN | -0.3 | 6 | V | with respect to GND | 6 | |
| Abs max EN voltage | VEN | -0.3 | V | max VIN + 0.3 V | 6 | ||
| Abs max OUT voltage | VOUT | -0.3 | V | max VIN + 0.3 or 3.6 (whichever is smaller) | 6 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 6 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| ESD HBM | V(ESD) | -1000 | 1000 | V | Human-body model, ANSI/ESDA/JEDEC JS-001 | 6 | |
| ESD CDM | V(ESD) | -500 | 500 | V | Charged-device model, JESD22-C101 | 6 | |
| Junction-to-ambient thermal resistance | RθJA | 267.3 | °C/W | DBZ (SOT-23), 3 pins | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 103.5 | °C/W | DBZ (SOT-23), 3 pins | 6 | ||
| Junction-to-board thermal resistance | RθJB | 98 | °C/W | DBZ (SOT-23), 3 pins | 6 | ||
| Junction-to-top characterization parameter | ΨJT | 9.2 | °C/W | DBZ (SOT-23), 3 pins | 6 | ||
| Junction-to-board characterization parameter | YJB | 97.4 | °C/W | DBZ (SOT-23), 3 pins | 6 |
CAD (KiCad official)
- Symbol:
TPS7A0522PDBZR - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
tps7a0522pdbzr-etched.step/tps7a0522pdbzr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps7a0522pdbzr.step/tps7a0522pdbzr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (55 pp, sha256
7b50504c32f5a27d, retrieved 2026-10-27, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).