main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps79930ddcr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps79930ddcr: viewers · Ray
package.json tps79930ddcr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps79930ddcr: specified limits as data (metadata.characteristics, 23 rows from the datasheet) · Ray
README.md tps79930ddcr: specified limits as data (metadata.characteristics, 23 rows from the datasheet) · Ray
tps79930ddcr-etched.fit.json tps79930ddcr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps79930ddcr-etched.glb tps79930ddcr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps79930ddcr-etched.step tps79930ddcr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps79930ddcr.glb Publish 0.1.0 · Ray
tps79930ddcr.kicad_mod Publish 0.1.0 · Ray
tps79930ddcr.kicad_sym Publish 0.1.0 · Ray
tps79930ddcr.lbr Publish 0.1.0 · Ray
tps79930ddcr.step Publish 0.1.0 · Ray

TPS79930DDCR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOT-23-5

TPS79930DDCR from Texas Instruments, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input supply voltage, 2.7 V to 6.5 V; minimum VIN = VOUT + VDO or 2.7 V whichever is greater.
2 GND power_in Ground reference; the pad must be tied to GND.
3 EN input Enable pin, active high (>1.2 V enables, <0.4 V disables); TTL-CMOS compatible input for regulator control.
4 NR output Noise reduction output from internal 1.193 V bandgap reference; connect to low-leakage capacitor ≤0.01 μF to ground to reduce output noise.
5 OUT output Regulated 3.0 V output providing up to 200 mA output current with 100 mV typical dropout voltage; requires ceramic capacitor ≥2 μF to ground for stability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output accuracy, nominal -1 1 % TJ = 25°C 5
Output accuracy over VIN, IOUT, temperature -2 2 % VOUT + 0.3 V ≤ VIN ≤ 6.5 V; 500 µA ≤ IOUT ≤ 200 mA 5
Dropout voltage VDO 100 175 mV VIN = VOUT(nom) – 0.1 V, IOUT = 200 mA, VOUT(nom) ≤ 3.3 V 5
Output current limit ICL 220 400 600 mA VOUT = 0.9 × VOUT(nom) 5
Enable low (shutdown) VEN(LO) 0 0.4 V 5
Enable high (enabled) VEN(HI) 1.2 V 5
Undervoltage lockout UVLO 1.9 2.2 2.65 V VIN rising 5
Ground pin current IGND 40 60 µA 500 µA ≤ IOUT ≤ 200 mA 5
Shutdown current (IGND) ISHDN 0.15 1 µA VEN ≤ 0.4 V, 2.7 V ≤ VIN ≤ 6.5 V 5
Enable pin current, enabled IEN(HI) 0.03 1 µA VEN = VIN = 6.5 V 5
Voltage IN (absolute maximum) -0.3 7 V 4
Voltage EN (absolute maximum) -0.3 V 4
Voltage OUT (absolute maximum) -0.3 V 4
Operating virtual junction temperature (absolute maximum) TJ -55 150 °C 4
Storage temperature Tstg -55 150 °C 4
Input voltage VIN 2.7 6.5 V Minimum VIN = VOUT + VDO or 2.7 V, whichever is greater 4
Output current IOUT 0.5 200 mA 4
Operating junction temperature TJ -40 125 °C 4
Junction-to-ambient thermal resistance (RθJA) RθJA 225.3 °C/W DDC (SOT-23-THIN) package, 5 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 39.3 °C/W DDC (SOT-23-THIN) package, 5 pins 4
Junction-to-board thermal resistance RθJB 47.3 °C/W DDC (SOT-23-THIN) package, 5 pins 4
Junction-to-top characterization parameter ψJT 0.5 °C/W DDC (SOT-23-THIN) package, 5 pins 4
Junction-to-board characterization parameter ψJB 46.7 °C/W DDC (SOT-23-THIN) package, 5 pins 4

CAD (KiCad official)

  • Symbol: TPS79930DDCR
  • Footprint: Package_TO_SOT_SMD:TSOT-23-5
  • 3D model: TSOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tps79930ddcr-etched.step / tps79930ddcr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps79930ddcr.step / tps79930ddcr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 c8a9038c1b38653a, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF