component
TPS79930DDCR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TSOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS79930DDCR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOT-23-5
TPS79930DDCR from Texas Instruments, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply voltage, 2.7 V to 6.5 V; minimum VIN = VOUT + VDO or 2.7 V whichever is greater. |
| 2 | GND | power_in | Ground reference; the pad must be tied to GND. |
| 3 | EN | input | Enable pin, active high (>1.2 V enables, <0.4 V disables); TTL-CMOS compatible input for regulator control. |
| 4 | NR | output | Noise reduction output from internal 1.193 V bandgap reference; connect to low-leakage capacitor ≤0.01 μF to ground to reduce output noise. |
| 5 | OUT | output | Regulated 3.0 V output providing up to 200 mA output current with 100 mV typical dropout voltage; requires ceramic capacitor ≥2 μF to ground for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TPS79930DDCR - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tps79930ddcr-etched.step/tps79930ddcr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps79930ddcr.step/tps79930ddcr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (49 pp, sha256
c8a9038c1b38653a, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).