main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps79733qdckrq1: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tps79733qdckrq1-etched.glb Publish 0.1.0 · Ray
tps79733qdckrq1-etched.step tps79733qdckrq1: factory component page (tier=mfr) · Ray
tps79733qdckrq1-hero.glb tps79733qdckrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
tps79733qdckrq1-hero.overlay.json Publish 0.1.0 · Ray
tps79733qdckrq1.glb Publish 0.1.0 · Ray
tps79733qdckrq1.kicad_mod Publish 0.1.0 · Ray
tps79733qdckrq1.kicad_sym Publish 0.1.0 · Ray
tps79733qdckrq1.lbr Publish 0.1.0 · Ray
tps79733qdckrq1.step Publish 0.1.0 · Ray

TPS79733QDCKRQ1

Texas Instruments · Linear Voltage Regulators (LDO) · SC-70-5

TPS79733QDCKRQ1 from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PG output Open-drain, active-high power good output that goes high impedance when VO exceeds about 90% of the regulated voltage and low impedance when VO falls below about 90%, and it requires a pullup resistor.
2 GND power_in Ground terminal, to which all voltages are referenced (network ground).
3 NC unconnected No connection; the terminal is not internally connected.
4 IN power_in Power supply input to the device, specified up to 5.5 V (absolute maximum input range is −0.3 V to 6 V).
5 OUT power_out Provides the regulated output voltage of the device, with continuous output current specified from 0 to 10 mA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage (IO = 3 mA) VI 1.8 5.5 V IO = 3 mA (see Note 2) 3
Input voltage (IO = 10 mA) VI 2 5.5 V IO = 10 mA (see Note 2) 3
Continuous output current IO 0 10 mA see Note 3 3
Operating junction temperature TJ -40 125 °C 3
Output voltage (TPS79733) VO 3.168 3.432 V 10 µA to 10 mA load; TJ = −40°C to 125°C, 4.3 V < VI < 5.5 V (see Note 4) 3
Quiescent current (GND current) 5 µA TJ = −40°C to 125°C, IO = 10 mA (see Note 4) 3
Output voltage line regulation (∆VO/VO) ∆VO/VO 0.8 %/V VO + 1 V < VI ≤ 5.5 V, TJ = −40°C to 125°C (see Note 4) 3
Output current limit 190 300 mA VO = 0 V, see Note 4 3
Dropout voltage (TPS79733) 400 mV IO = 10 mA, TJ = −40°C to 125°C (see Note 5) 3
PG trip threshold voltage 82 90 96 %VO VO decreasing 3
PG output low voltage 0.14 0.4 V VI = 1.4 V, IO(PG) = 100 µA 3
Input voltage range -0.3 6 V All voltages with respect to network ground terminal (Note 1) 2
Maximum dc output voltage 4.9 V 2
ESD rating, HBM 3 kV 2
ESD rating, CDM 1 kV 2
Operating ambient temperature range TA -40 125 °C 2
Storage temperature range Tstg -65 150 °C 2
Thermal resistance junction-to-ambient, Low K board RθJA 396.24 °C/W Low K (JEDEC 1s) board, DCK package 2
Thermal resistance junction-to-ambient, High K board RθJA 314.74 °C/W High K (JEDEC 2s2p) board, DCK package 2
Thermal resistance junction-to-case, Low K board RθJC 165.39 °C/W Low K board, DCK package 2
Thermal resistance junction-to-case, High K board RθJC 165.39 °C/W High K board, DCK package 2

CAD (KiCad official)

  • Symbol: TPS79733QDCKRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: tps79733qdckrq1-etched.step / tps79733qdckrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps79733qdckrq1.step / tps79733qdckrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (16 pp, sha256 1c4871760dc44d55, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF