3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS79733QDCKRQ1
Texas Instruments · Linear Voltage Regulators (LDO) · SC-70-5
TPS79733QDCKRQ1 from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PG | output | Open-drain, active-high power good output that goes high impedance when VO exceeds about 90% of the regulated voltage and low impedance when VO falls below about 90%, and it requires a pullup resistor. |
| 2 | GND | power_in | Ground terminal, to which all voltages are referenced (network ground). |
| 3 | NC | unconnected | No connection; the terminal is not internally connected. |
| 4 | IN | power_in | Power supply input to the device, specified up to 5.5 V (absolute maximum input range is −0.3 V to 6 V). |
| 5 | OUT | power_out | Provides the regulated output voltage of the device, with continuous output current specified from 0 to 10 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (IO = 3 mA) | VI | 1.8 | 5.5 | V | IO = 3 mA (see Note 2) | 3 | |
| Input voltage (IO = 10 mA) | VI | 2 | 5.5 | V | IO = 10 mA (see Note 2) | 3 | |
| Continuous output current | IO | 0 | 10 | mA | see Note 3 | 3 | |
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Output voltage (TPS79733) | VO | 3.168 | 3.432 | V | 10 µA to 10 mA load; TJ = −40°C to 125°C, 4.3 V < VI < 5.5 V (see Note 4) | 3 | |
| Quiescent current (GND current) | 5 | µA | TJ = −40°C to 125°C, IO = 10 mA (see Note 4) | 3 | |||
| Output voltage line regulation (∆VO/VO) | ∆VO/VO | 0.8 | %/V | VO + 1 V < VI ≤ 5.5 V, TJ = −40°C to 125°C (see Note 4) | 3 | ||
| Output current limit | 190 | 300 | mA | VO = 0 V, see Note 4 | 3 | ||
| Dropout voltage (TPS79733) | 400 | mV | IO = 10 mA, TJ = −40°C to 125°C (see Note 5) | 3 | |||
| PG trip threshold voltage | 82 | 90 | 96 | %VO | VO decreasing | 3 | |
| PG output low voltage | 0.14 | 0.4 | V | VI = 1.4 V, IO(PG) = 100 µA | 3 | ||
| Input voltage range | -0.3 | 6 | V | All voltages with respect to network ground terminal (Note 1) | 2 | ||
| Maximum dc output voltage | 4.9 | V | 2 | ||||
| ESD rating, HBM | 3 | kV | 2 | ||||
| ESD rating, CDM | 1 | kV | 2 | ||||
| Operating ambient temperature range | TA | -40 | 125 | °C | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Thermal resistance junction-to-ambient, Low K board | RθJA | 396.24 | °C/W | Low K (JEDEC 1s) board, DCK package | 2 | ||
| Thermal resistance junction-to-ambient, High K board | RθJA | 314.74 | °C/W | High K (JEDEC 2s2p) board, DCK package | 2 | ||
| Thermal resistance junction-to-case, Low K board | RθJC | 165.39 | °C/W | Low K board, DCK package | 2 | ||
| Thermal resistance junction-to-case, High K board | RθJC | 165.39 | °C/W | High K board, DCK package | 2 |
CAD (KiCad official)
- Symbol:
TPS79733QDCKRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
tps79733qdckrq1-etched.step/tps79733qdckrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps79733qdckrq1.step/tps79733qdckrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (16 pp, sha256
1c4871760dc44d55, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).