main
Ray
Publish 0.1.0
1a837b0
TPS79147DBVR
Texas Instruments · Pre-ordered Chips · SOT-23-5
TPS79147DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply to the device, operating range 2.7 V to 5.5 V. |
| 2 | GND | power_in | Regulator ground. |
| 3 | EN | input | Active-low enable input: logic high (> 2 V) puts the device in shutdown, logic low (< 0.7 V) enables the device. |
| 4 | BYPASS | passive | External bypass capacitor connected here forms a low-pass filter with an internal resistor to further reduce regulator noise. |
| 5 | OUT | power_out | Regulated output of the device, rated up to 100 mA continuous output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Interface ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (TPS79147) | VOUT | 4.606 | 4.794 | V | 0 µA < IOUT < 100 mA, 5.2 V < VIN < 5.5 V | 5 | |
| Output voltage (TPS79147) at 25°C | VOUT | 4.7 | V | TJ = 25°C | 5 | ||
| Quiescent current | IQ | 250 | µA | 0 µA < IOUT < 100 mA | 5 | ||
| Quiescent current at 25°C | IQ | 170 | µA | 0 µA < IOUT < 100 mA, TJ = 25°C | 5 | ||
| Output voltage line regulation | ΔVOUT/VOUT | 0.12 | %/V | VOUT + 1 V < VIN ≤ 5.5 V | 5 | ||
| Output current limit | 285 | 600 | mA | VOUT = 0 V | 5 | ||
| UVLO threshold | 2.25 | 2.65 | V | VIN rising | 5 | ||
| Standby current | 0.07 | 1 | µA | EN = VIN, 2.7 V < VIN < 5.5 V | 5 | ||
| High level enable input voltage | 2 | V | 2.7 V < VIN < 5.5 V | 5 | |||
| Low level enable input voltage | 0.7 | V | 2.7 V < VIN < 5.5 V | 5 | |||
| Input current (EN) | -1 | 1 | µA | EN = VIN | 5 | ||
| Dropout voltage (TPS79147) | VDO | 70 | mV | IOUT = 100 mA | 5 | ||
| Dropout voltage (TPS79147) at 25°C | VDO | 38 | mV | IOUT = 100 mA, TJ = 25°C | 5 | ||
| Load regulation | 5 | mV | 0 µA < IOUT < 100 mA, TJ = 25°C | 5 | |||
| Reference voltage | VREF | 1.2246 | V | 5 | |||
| UVLO hysteresis | 100 | mV | TJ = 25°C, VIN rising | 5 | |||
| Input voltage | VIN | 2.7 | 5.5 | V | 4 | ||
| Continuous output current | IOUT | 0 | 100 | mA | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Input voltage range | VIN | -0.3 | 6 | V | 3 | ||
| Voltage range at EN | VEN | -0.3 | V | max is VIN + 0.3 V | 3 | ||
| Voltage on OUT | VOUT | -0.3 | 6 | V | 3 | ||
| Operating virtual junction temperature | TJ | -40 | 150 | °C | 3 | ||
| Operating ambient temperature | TA | -40 | 85 | °C | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human-body model, ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD CDM | V(ESD) | -500 | 500 | V | Charged-device model, JESD22-C101 | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 192.6 | °C/W | DBV (SOT23) 5 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 104.2 | °C/W | DBV (SOT23) 5 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 55.2 | °C/W | DBV (SOT23) 5 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 24.1 | °C/W | DBV (SOT23) 5 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 54.8 | °C/W | DBV (SOT23) 5 pins | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TPS79147DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps79147dbvr-etched.step/tps79147dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps79147dbvr.step/tps79147dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
66bee4ee5433bf1c, retrieved 2026-11-13, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# TPS79147DBVR
**Texas Instruments** · Pre-ordered Chips · SOT-23-5
TPS79147DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply to the device, operating range 2.7 V to 5.5 V. |
| 2 | GND | power_in | Regulator ground. |
| 3 | EN | input | Active-low enable input: logic high (> 2 V) puts the device in shutdown, logic low (< 0.7 V) enables the device. |
| 4 | BYPASS | passive | External bypass capacitor connected here forms a low-pass filter with an internal resistor to further reduce regulator noise. |
| 5 | OUT | power_out | Regulated output of the device, rated up to 100 mA continuous output current. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Interface ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (TPS79147) | VOUT | 4.606 | | 4.794 | V | 0 µA < IOUT < 100 mA, 5.2 V < VIN < 5.5 V | 5 |
| Output voltage (TPS79147) at 25°C | VOUT | | 4.7 | | V | TJ = 25°C | 5 |
| Quiescent current | IQ | | | 250 | µA | 0 µA < IOUT < 100 mA | 5 |
| Quiescent current at 25°C | IQ | | 170 | | µA | 0 µA < IOUT < 100 mA, TJ = 25°C | 5 |
| Output voltage line regulation | ΔVOUT/VOUT | | | 0.12 | %/V | VOUT + 1 V < VIN ≤ 5.5 V | 5 |
| Output current limit | | 285 | | 600 | mA | VOUT = 0 V | 5 |
| UVLO threshold | | 2.25 | | 2.65 | V | VIN rising | 5 |
| Standby current | | | 0.07 | 1 | µA | EN = VIN, 2.7 V < VIN < 5.5 V | 5 |
| High level enable input voltage | | 2 | | | V | 2.7 V < VIN < 5.5 V | 5 |
| Low level enable input voltage | | | | 0.7 | V | 2.7 V < VIN < 5.5 V | 5 |
| Input current (EN) | | -1 | | 1 | µA | EN = VIN | 5 |
| Dropout voltage (TPS79147) | VDO | | | 70 | mV | IOUT = 100 mA | 5 |
| Dropout voltage (TPS79147) at 25°C | VDO | | 38 | | mV | IOUT = 100 mA, TJ = 25°C | 5 |
| Load regulation | | | 5 | | mV | 0 µA < IOUT < 100 mA, TJ = 25°C | 5 |
| Reference voltage | VREF | | 1.2246 | | V | | 5 |
| UVLO hysteresis | | | 100 | | mV | TJ = 25°C, VIN rising | 5 |
| Input voltage | VIN | 2.7 | | 5.5 | V | | 4 |
| Continuous output current | IOUT | 0 | | 100 | mA | | 4 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Input voltage range | VIN | -0.3 | | 6 | V | | 3 |
| Voltage range at EN | VEN | -0.3 | | | V | max is VIN + 0.3 V | 3 |
| Voltage on OUT | VOUT | -0.3 | | 6 | V | | 3 |
| Operating virtual junction temperature | TJ | -40 | | 150 | °C | | 3 |
| Operating ambient temperature | TA | -40 | | 85 | °C | | 3 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 3 |
| ESD HBM | V(ESD) | -2000 | | 2000 | V | Human-body model, ANSI/ESDA/JEDEC JS-001 | 4 |
| ESD CDM | V(ESD) | -500 | | 500 | V | Charged-device model, JESD22-C101 | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 192.6 | | °C/W | DBV (SOT23) 5 pins | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 104.2 | | °C/W | DBV (SOT23) 5 pins | 4 |
| Junction-to-board thermal resistance | RθJB | | 55.2 | | °C/W | DBV (SOT23) 5 pins | 4 |
| Junction-to-top characterization parameter | ψJT | | 24.1 | | °C/W | DBV (SOT23) 5 pins | 4 |
| Junction-to-board characterization parameter | ψJB | | 54.8 | | °C/W | DBV (SOT23) 5 pins | 4 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `TPS79147DBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tps79147dbvr-etched.step` / `tps79147dbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps79147dbvr.step` / `tps79147dbvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps79147.pdf) (30 pp, sha256 `66bee4ee5433bf1c`, retrieved 2026-11-13, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/tps79147dbvr-datasheet.pdf)