Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS79147DBVR

Texas Instruments · Pre-ordered Chips · SOT-23-5

TPS79147DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN power_in Input supply to the device, operating range 2.7 V to 5.5 V.
2 GND power_in Regulator ground.
3 EN input Active-low enable input: logic high (> 2 V) puts the device in shutdown, logic low (< 0.7 V) enables the device.
4 BYPASS passive External bypass capacitor connected here forms a low-pass filter with an internal resistor to further reduce regulator noise.
5 OUT power_out Regulated output of the device, rated up to 100 mA continuous output current.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Interface ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage (TPS79147) VOUT 4.606 4.794 V 0 µA < IOUT < 100 mA, 5.2 V < VIN < 5.5 V 5
Output voltage (TPS79147) at 25°C VOUT 4.7 V TJ = 25°C 5
Quiescent current IQ 250 µA 0 µA < IOUT < 100 mA 5
Quiescent current at 25°C IQ 170 µA 0 µA < IOUT < 100 mA, TJ = 25°C 5
Output voltage line regulation ΔVOUT/VOUT 0.12 %/V VOUT + 1 V < VIN ≤ 5.5 V 5
Output current limit 285 600 mA VOUT = 0 V 5
UVLO threshold 2.25 2.65 V VIN rising 5
Standby current 0.07 1 µA EN = VIN, 2.7 V < VIN < 5.5 V 5
High level enable input voltage 2 V 2.7 V < VIN < 5.5 V 5
Low level enable input voltage 0.7 V 2.7 V < VIN < 5.5 V 5
Input current (EN) -1 1 µA EN = VIN 5
Dropout voltage (TPS79147) VDO 70 mV IOUT = 100 mA 5
Dropout voltage (TPS79147) at 25°C VDO 38 mV IOUT = 100 mA, TJ = 25°C 5
Load regulation 5 mV 0 µA < IOUT < 100 mA, TJ = 25°C 5
Reference voltage VREF 1.2246 V 5
UVLO hysteresis 100 mV TJ = 25°C, VIN rising 5
Input voltage VIN 2.7 5.5 V 4
Continuous output current IOUT 0 100 mA 4
Operating junction temperature TJ -40 125 °C 4
Input voltage range VIN -0.3 6 V 3
Voltage range at EN VEN -0.3 V max is VIN + 0.3 V 3
Voltage on OUT VOUT -0.3 6 V 3
Operating virtual junction temperature TJ -40 150 °C 3
Operating ambient temperature TA -40 85 °C 3
Storage temperature Tstg -65 150 °C 3
ESD HBM V(ESD) -2000 2000 V Human-body model, ANSI/ESDA/JEDEC JS-001 4
ESD CDM V(ESD) -500 500 V Charged-device model, JESD22-C101 4
Junction-to-ambient thermal resistance RθJA 192.6 °C/W DBV (SOT23) 5 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 104.2 °C/W DBV (SOT23) 5 pins 4
Junction-to-board thermal resistance RθJB 55.2 °C/W DBV (SOT23) 5 pins 4
Junction-to-top characterization parameter ψJT 24.1 °C/W DBV (SOT23) 5 pins 4
Junction-to-board characterization parameter ψJB 54.8 °C/W DBV (SOT23) 5 pins 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS79147DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps79147dbvr-etched.step / tps79147dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps79147dbvr.step / tps79147dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 66bee4ee5433bf1c, retrieved 2026-11-13, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF