main
History Download
Ray Publish 0.1.0 d707447

TPS78101DRVR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6-EP(2x2)

TPS78101DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated output voltage pin; a small 1µF ceramic capacitor is needed from this pin to ground to assure stability.
2 N/C unconnected Not connected.
3 VSET/FB input Feedback pin (FB) for adjustable versions and VSET select pin for fixed versions; driving VSET below 0.4V selects the preset high output voltage and driving it above 1.2V selects the preset low output voltage.
4 EN input Driving EN above 1.2V turns on the regulator, and driving it below 0.4V puts the regulator into shutdown, reducing operating current to 18nA typical.
5 GND power_in Ground pin.
6 IN power_in Input pin; a small capacitor is needed from this pin to ground to assure stability, with a typical input capacitor of 1.0µF, and input and output capacitor grounds should be tied back to the IC ground with no significant impedance between them.
7 Thermal Pad power_in Thermal pad; it is recommended that the SON package thermal pad be connected to ground.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-6-EP(2x2)
Category Power Management (PMIC)
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range (absolute maximum) VIN -0.3 6 V 2
Enable and VSET voltage range (absolute maximum) VEN, VVSET -0.3 V Maximum is VIN + 0.3 V or +6.0 V, whichever is less (footnote 2) 2
Output voltage range (absolute maximum) VOUT -0.3 V Maximum printed as VIN + 0.3 V 2
Operating junction temperature range (absolute maximum) TJ -40 125 °C 2
Storage temperature range TSTG -55 150 °C 2
ESD rating, human body model (HBM) 2 kV 2
ESD rating, charged device model (CDM) 500 V 2
Input voltage range VIN 2.2 5.5 V 3
DC output accuracy, nominal VOUT -2 2 % Nominal TJ = +25°C, VSET = high/low; printed typ ±1 3
DC output accuracy over VIN, IOUT and temperature VOUT -3 3 % Over VIN, IOUT, temperature; VOUT + 0.5V ≤ VIN ≤ 5.5V, 0mA ≤ IOUT ≤ 150mA, VSET = high/low; printed typ ±2.0 3
Line regulation ΔVOUT/ΔVIN -1 1 % VOUT(NOM) + 0.5V ≤ VIN ≤ 5.5V, IOUT = 5mA 3
Load regulation ΔVOUT/ΔIOUT -2 2 % 0mA ≤ IOUT ≤ 150mA 3
Dropout voltage VDO 250 mV VIN = 95% VOUT(NOM), IOUT = 150mA 3
Output voltage range (adjustable version only) VOUT_RANGE 5.25 V VIN = 5.5V, IOUT = 100µA 3
VSET high threshold / EN high threshold VHI 1.2 V VSET high (output VOUT(LOW) selected), or EN high (enabled); printed max is VIN 3
VSET low threshold / EN low threshold VLO 0 0.4 V VSET low (output VOUT(HIGH) selected), or EN low (disabled) 3
Output current limit ICL 150 230 400 mA VOUT = 0.90 × VOUT(NOM) 3
Ground pin current at no load IGND 1 1.3 µA IOUT = 0mA 3
Ground pin current at 150 mA load IGND 8 µA IOUT = 150mA 3
Shutdown current (IGND) ISHDN 18 130 nA VEN ≤ 0.4V, 2.2V ≤ VIN < 5.5V, TJ = -40°C to +100°C 3
Operating junction temperature range TJ -40 125 °C 3
Junction-to-ambient thermal resistance (DRV, high-K board) RθJA 65 °C/W High-K JEDEC board, DRV (WSON-6) package 2
Junction-to-case thermal resistance (DRV, high-K board) RθJC 20 °C/W High-K JEDEC board, DRV (WSON-6) package 2

CAD (KiCad official)

  • Symbol: TPS78101DRVR
  • Footprint: Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm
  • 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tps78101drvr-etched.step / tps78101drvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps78101drvr.step / tps78101drvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 222ee0718dd9aef1, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF