Generated by kicad-footprint-generator · KiCad file format 20260206
TPS78101DRVR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6-EP(2x2)
TPS78101DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage pin; a small 1µF ceramic capacitor is needed from this pin to ground to assure stability. |
| 2 | N/C | unconnected | Not connected. |
| 3 | VSET/FB | input | Feedback pin (FB) for adjustable versions and VSET select pin for fixed versions; driving VSET below 0.4V selects the preset high output voltage and driving it above 1.2V selects the preset low output voltage. |
| 4 | EN | input | Driving EN above 1.2V turns on the regulator, and driving it below 0.4V puts the regulator into shutdown, reducing operating current to 18nA typical. |
| 5 | GND | power_in | Ground pin. |
| 6 | IN | power_in | Input pin; a small capacitor is needed from this pin to ground to assure stability, with a typical input capacitor of 1.0µF, and input and output capacitor grounds should be tied back to the IC ground with no significant impedance between them. |
| 7 | Thermal Pad | power_in | Thermal pad; it is recommended that the SON package thermal pad be connected to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range (absolute maximum) | VIN | -0.3 | 6 | V | 2 | ||
| Enable and VSET voltage range (absolute maximum) | VEN, VVSET | -0.3 | V | Maximum is VIN + 0.3 V or +6.0 V, whichever is less (footnote 2) | 2 | ||
| Output voltage range (absolute maximum) | VOUT | -0.3 | V | Maximum printed as VIN + 0.3 V | 2 | ||
| Operating junction temperature range (absolute maximum) | TJ | -40 | 125 | °C | 2 | ||
| Storage temperature range | TSTG | -55 | 150 | °C | 2 | ||
| ESD rating, human body model (HBM) | 2 | kV | 2 | ||||
| ESD rating, charged device model (CDM) | 500 | V | 2 | ||||
| Input voltage range | VIN | 2.2 | 5.5 | V | 3 | ||
| DC output accuracy, nominal | VOUT | -2 | 2 | % | Nominal TJ = +25°C, VSET = high/low; printed typ ±1 | 3 | |
| DC output accuracy over VIN, IOUT and temperature | VOUT | -3 | 3 | % | Over VIN, IOUT, temperature; VOUT + 0.5V ≤ VIN ≤ 5.5V, 0mA ≤ IOUT ≤ 150mA, VSET = high/low; printed typ ±2.0 | 3 | |
| Line regulation | ΔVOUT/ΔVIN | -1 | 1 | % | VOUT(NOM) + 0.5V ≤ VIN ≤ 5.5V, IOUT = 5mA | 3 | |
| Load regulation | ΔVOUT/ΔIOUT | -2 | 2 | % | 0mA ≤ IOUT ≤ 150mA | 3 | |
| Dropout voltage | VDO | 250 | mV | VIN = 95% VOUT(NOM), IOUT = 150mA | 3 | ||
| Output voltage range (adjustable version only) | VOUT_RANGE | 5.25 | V | VIN = 5.5V, IOUT = 100µA | 3 | ||
| VSET high threshold / EN high threshold | VHI | 1.2 | V | VSET high (output VOUT(LOW) selected), or EN high (enabled); printed max is VIN | 3 | ||
| VSET low threshold / EN low threshold | VLO | 0 | 0.4 | V | VSET low (output VOUT(HIGH) selected), or EN low (disabled) | 3 | |
| Output current limit | ICL | 150 | 230 | 400 | mA | VOUT = 0.90 × VOUT(NOM) | 3 |
| Ground pin current at no load | IGND | 1 | 1.3 | µA | IOUT = 0mA | 3 | |
| Ground pin current at 150 mA load | IGND | 8 | µA | IOUT = 150mA | 3 | ||
| Shutdown current (IGND) | ISHDN | 18 | 130 | nA | VEN ≤ 0.4V, 2.2V ≤ VIN < 5.5V, TJ = -40°C to +100°C | 3 | |
| Operating junction temperature range | TJ | -40 | 125 | °C | 3 | ||
| Junction-to-ambient thermal resistance (DRV, high-K board) | RθJA | 65 | °C/W | High-K JEDEC board, DRV (WSON-6) package | 2 | ||
| Junction-to-case thermal resistance (DRV, high-K board) | RθJC | 20 | °C/W | High-K JEDEC board, DRV (WSON-6) package | 2 |
CAD (KiCad official)
- Symbol:
TPS78101DRVR - Footprint:
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps78101drvr-etched.step/tps78101drvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps78101drvr.step/tps78101drvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
222ee0718dd9aef1, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).