main
Ray
Publish 0.1.0
0aaf6b0
TPS77515DR
Texas Instruments · Linear Voltage Regulators (LDO) · SOIC-8
TPS77515DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | EN | input | Negative polarity enable input; a TTL high shuts down the regulator and EN should be tied to ground if shutdown is not used. |
| 3 | IN | power_in | Input voltage, absolute maximum -0.3 to 13.5 V, with a 0.047 µF or larger ceramic bypass capacitor suggested if the supply is more than a few inches away. |
| 4 | IN | power_in | Input voltage pin, internally common with the other IN pin (pin 3). |
| 5 | OUT | power_out | Regulated output voltage that needs at least 10 µF output capacitance with ESR between 50 mΩ and 1.5 Ω to GND. |
| 6 | OUT | power_out | Regulated output voltage pin, internally common with the other OUT pin (pin 5). |
| 7 | FB/NC | unconnected | Feedback input used only on the adjustable version; it is not used on the fixed 1.5 V TPS77515. |
| 8 | RESET | output | Open-drain RESET output of the TPS775xx that goes low when VOUT falls to between 92% and 98% of nominal, needs a pullup resistor and can be left floating if unused. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 2.7 | 10 | V | 3 | ||
| Output voltage accuracy | VOUT | -2 | 2 | % | VOUT + 1V ≤ VIN ≤ 10V, 10µA < IOUT < 500mA | 3 | |
| Output current limit | ICL | 1.2 | 1.6 | 1.9 | A | VOUT = 0V | 3 |
| Standby current | ISTBY | 10 | µA | EN = VIN, 2.7V < VIN < 10V | 3 | ||
| High-level enable input voltage | VEN(HI) | 1.7 | V | 3 | |||
| Low-level enable input voltage | VEN(LO) | 0.9 | V | 3 | |||
| Input current (EN) | -1 | 0 | 1 | µA | EN = 0V | 3 | |
| Input current (EN) | -1 | 1 | µA | EN = VIN | 3 | ||
| RESET trip threshold voltage | 92 | 98 | %VOUT | VOUT decreasing | 3 | ||
| RESET output low voltage | 0.15 | 0.4 | V | VIN = 2.7V, IOUT(RESET) = 1mA | 3 | ||
| RESET leakage current | 1 | µA | V(RESET) = 5V | 3 | |||
| Ground pin current | IGND | 85 | µA | IOUT = 10mA | 3 | ||
| Ground pin current | IGND | 125 | µA | IOUT = 500mA | 3 | ||
| Output voltage line regulation | ΔVOUT%/ΔVIN | 0.01 | %/V | VOUT + 1V ≤ VIN ≤ 10V | 3 | ||
| Load regulation | ΔVOUT%/ΔIOUT | 3 | mV | 3 | |||
| Power-supply ripple rejection | PSRR | 60 | dB | f = 100Hz, COUT = 10µF | 3 | ||
| RESET time-out delay | 200 | ms | 3 | ||||
| Shutdown temperature | TSD | 150 | °C | 3 | |||
| Operating junction temperature range | TJ | -40 | 125 | °C | 3 | ||
| Input voltage range | VIN | -0.3 | 13.5 | V | 2 | ||
| Voltage range at EN | -0.3 | 16.5 | V | 2 | |||
| Maximum RESET voltage | 16.5 | V | TPS775xx | 2 | |||
| Voltage range at OUT, FB | 7 | V | 2 | ||||
| Operating junction temperature range | TJ | -40 | 125 | °C | 2 | ||
| Storage junction temperature range | TSTG | -65 | 150 | °C | 2 | ||
| ESD rating, HBM | 2 | kV | 2 | ||||
| Continuous power dissipation, D package | 568 | mW | 0 CFM, TA < +25°C; derating 5.68mW/°C above TA = +25°C | 2 |
CAD (KiCad official)
- Symbol:
TPS77515DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tps77515dr-etched.step/tps77515dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps77515dr.step/tps77515dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
82c944d5984b4ae3, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS77515DR
**Texas Instruments** · Linear Voltage Regulators (LDO) · SOIC-8
TPS77515DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | EN | input | Negative polarity enable input; a TTL high shuts down the regulator and EN should be tied to ground if shutdown is not used. |
| 3 | IN | power_in | Input voltage, absolute maximum -0.3 to 13.5 V, with a 0.047 µF or larger ceramic bypass capacitor suggested if the supply is more than a few inches away. |
| 4 | IN | power_in | Input voltage pin, internally common with the other IN pin (pin 3). |
| 5 | OUT | power_out | Regulated output voltage that needs at least 10 µF output capacitance with ESR between 50 mΩ and 1.5 Ω to GND. |
| 6 | OUT | power_out | Regulated output voltage pin, internally common with the other OUT pin (pin 5). |
| 7 | FB/NC | unconnected | Feedback input used only on the adjustable version; it is not used on the fixed 1.5 V TPS77515. |
| 8 | RESET | output | Open-drain RESET output of the TPS775xx that goes low when VOUT falls to between 92% and 98% of nominal, needs a pullup resistor and can be left floating if unused. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 2.7 | | 10 | V | | 3 |
| Output voltage accuracy | VOUT | -2 | | 2 | % | VOUT + 1V ≤ VIN ≤ 10V, 10µA < IOUT < 500mA | 3 |
| Output current limit | ICL | 1.2 | 1.6 | 1.9 | A | VOUT = 0V | 3 |
| Standby current | ISTBY | | | 10 | µA | EN = VIN, 2.7V < VIN < 10V | 3 |
| High-level enable input voltage | VEN(HI) | 1.7 | | | V | | 3 |
| Low-level enable input voltage | VEN(LO) | | | 0.9 | V | | 3 |
| Input current (EN) | | -1 | 0 | 1 | µA | EN = 0V | 3 |
| Input current (EN) | | -1 | | 1 | µA | EN = VIN | 3 |
| RESET trip threshold voltage | | 92 | | 98 | %VOUT | VOUT decreasing | 3 |
| RESET output low voltage | | | 0.15 | 0.4 | V | VIN = 2.7V, IOUT(RESET) = 1mA | 3 |
| RESET leakage current | | | | 1 | µA | V(RESET) = 5V | 3 |
| Ground pin current | IGND | | 85 | | µA | IOUT = 10mA | 3 |
| Ground pin current | IGND | | | 125 | µA | IOUT = 500mA | 3 |
| Output voltage line regulation | ΔVOUT%/ΔVIN | | 0.01 | | %/V | VOUT + 1V ≤ VIN ≤ 10V | 3 |
| Load regulation | ΔVOUT%/ΔIOUT | | 3 | | mV | | 3 |
| Power-supply ripple rejection | PSRR | | 60 | | dB | f = 100Hz, COUT = 10µF | 3 |
| RESET time-out delay | | | 200 | | ms | | 3 |
| Shutdown temperature | TSD | | 150 | | °C | | 3 |
| Operating junction temperature range | TJ | -40 | | 125 | °C | | 3 |
| Input voltage range | VIN | -0.3 | | 13.5 | V | | 2 |
| Voltage range at EN | | -0.3 | | 16.5 | V | | 2 |
| Maximum RESET voltage | | | | 16.5 | V | TPS775xx | 2 |
| Voltage range at OUT, FB | | | | 7 | V | | 2 |
| Operating junction temperature range | TJ | -40 | | 125 | °C | | 2 |
| Storage junction temperature range | TSTG | -65 | | 150 | °C | | 2 |
| ESD rating, HBM | | | | 2 | kV | | 2 |
| Continuous power dissipation, D package | | | | 568 | mW | 0 CFM, TA < +25°C; derating 5.68mW/°C above TA = +25°C | 2 |
## CAD (KiCad official)
- Symbol: `TPS77515DR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `tps77515dr-etched.step` / `tps77515dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps77515dr.step` / `tps77515dr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps77515.pdf) (32 pp, sha256 `82c944d5984b4ae3`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps77515dr-datasheet.pdf)