Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS77515DR

Texas Instruments · Linear Voltage Regulators (LDO) · SOIC-8

TPS77515DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground.
2 EN input Negative polarity enable input; a TTL high shuts down the regulator and EN should be tied to ground if shutdown is not used.
3 IN power_in Input voltage, absolute maximum -0.3 to 13.5 V, with a 0.047 µF or larger ceramic bypass capacitor suggested if the supply is more than a few inches away.
4 IN power_in Input voltage pin, internally common with the other IN pin (pin 3).
5 OUT power_out Regulated output voltage that needs at least 10 µF output capacitance with ESR between 50 mΩ and 1.5 Ω to GND.
6 OUT power_out Regulated output voltage pin, internally common with the other OUT pin (pin 5).
7 FB/NC unconnected Feedback input used only on the adjustable version; it is not used on the fixed 1.5 V TPS77515.
8 RESET output Open-drain RESET output of the TPS775xx that goes low when VOUT falls to between 92% and 98% of nominal, needs a pullup resistor and can be left floating if unused.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VIN 2.7 10 V 3
Output voltage accuracy VOUT -2 2 % VOUT + 1V ≤ VIN ≤ 10V, 10µA < IOUT < 500mA 3
Output current limit ICL 1.2 1.6 1.9 A VOUT = 0V 3
Standby current ISTBY 10 µA EN = VIN, 2.7V < VIN < 10V 3
High-level enable input voltage VEN(HI) 1.7 V 3
Low-level enable input voltage VEN(LO) 0.9 V 3
Input current (EN) -1 0 1 µA EN = 0V 3
Input current (EN) -1 1 µA EN = VIN 3
RESET trip threshold voltage 92 98 %VOUT VOUT decreasing 3
RESET output low voltage 0.15 0.4 V VIN = 2.7V, IOUT(RESET) = 1mA 3
RESET leakage current 1 µA V(RESET) = 5V 3
Ground pin current IGND 85 µA IOUT = 10mA 3
Ground pin current IGND 125 µA IOUT = 500mA 3
Output voltage line regulation ΔVOUT%/ΔVIN 0.01 %/V VOUT + 1V ≤ VIN ≤ 10V 3
Load regulation ΔVOUT%/ΔIOUT 3 mV 3
Power-supply ripple rejection PSRR 60 dB f = 100Hz, COUT = 10µF 3
RESET time-out delay 200 ms 3
Shutdown temperature TSD 150 °C 3
Operating junction temperature range TJ -40 125 °C 3
Input voltage range VIN -0.3 13.5 V 2
Voltage range at EN -0.3 16.5 V 2
Maximum RESET voltage 16.5 V TPS775xx 2
Voltage range at OUT, FB 7 V 2
Operating junction temperature range TJ -40 125 °C 2
Storage junction temperature range TSTG -65 150 °C 2
ESD rating, HBM 2 kV 2
Continuous power dissipation, D package 568 mW 0 CFM, TA < +25°C; derating 5.68mW/°C above TA = +25°C 2

CAD (KiCad official)

  • Symbol: TPS77515DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tps77515dr-etched.step / tps77515dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps77515dr.step / tps77515dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 82c944d5984b4ae3, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF