main
Ray
Publish 0.1.0
58274a4
TPS77033DBVT
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5
TPS77033DBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply voltage; recommended input range is 2.7 V to 10 V, and the absolute maximum input voltage is 13.5 V. |
| 2 | GND | power_in | Ground terminal, the network ground reference for all voltages on the device. |
| 3 | EN | input | Logic enable input that shuts the regulator down into sleep mode when pulled low; voltage on EN must stay between -0.3 V and VI + 0.3 V. |
| 4 | NC | unconnected | No internal connection on fixed-voltage options such as the TPS77033; pin 4 is FB (feedback) only on the adjustable TPS77001. |
| 5 | OUT | power_out | Regulated output voltage, supplying up to 50 mA continuous output current; voltage on OUT is rated to 7 V maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (TJ = -40°C to 125°C) | VO | 3.201 | 3.399 | V | TJ = -40°C to 125°C, 4.3 V < VIN < 10 V | 4 | |
| Output voltage line regulation (see Notes 4 and 5) | ∆VO/VO | 0.1 | %/V | VO + 1 V < VI ≤ 10 V, TJ = -40°C to 125°C | 4 | ||
| Quiescent current (GND current) | 28 | µA | EN = 0V, IO = 50mA, TJ = -40°C to 125°C | 4 | |||
| Output current limit | 350 | 750 | mA | VO = 0V | 4 | ||
| Standby current | 2 | µA | TJ = -40°C to 125°C | 4 | |||
| Dropout voltage | 100 | mV | IO = 50 mA TJ = -40°C to 125°C | 5 | |||
| High level enable input voltage | 1.7 | V | 2.7 V < VI < 10 V | 5 | |||
| Low level enable input voltage | 0.9 | V | 2.7 V < VI < 10 V | 5 | |||
| Input current (EN) | -1 | 0 | 1 | µA | EN = 0 V | 5 | |
| Input current (EN) | -1 | 1 | µA | EN = VI | 5 | ||
| Input voltage range | VI | -0.3 | 13.5 | V | 3 | ||
| Voltage range at EN | VEN | -0.3 | V | maximum printed as VI + 0.3 V | 3 | ||
| Voltage on OUT, FB | 7 | V | 3 | ||||
| ESD rating, HBM | 2 | kV | HBM | 3 | |||
| Operating virtual junction temperature range | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Input voltage, VI | VI | 2.7 | 10 | V | 3 | ||
| Output voltage range, VO | VO | 1.2 | 5.5 | V | 3 | ||
| Continuous output current, IO | IO | 0 | 50 | mA | 3 | ||
| Operating junction temperature, TJ | TJ | -40 | 125 | °C | 3 | ||
| Junction-to-ambient thermal resistance, RθJA (Low K board) | RθJA | 259 | °C/W | Low K board, DBV package | 3 | ||
| Junction-to-ambient thermal resistance, RθJA (High K board) | RθJA | 180 | °C/W | High K board, DBV package | 3 | ||
| Junction-to-case thermal resistance, RθJC | RθJC | 65.8 | °C/W | DBV package | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TPS77033DBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps77033dbvt-etched.step/tps77033dbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps77033dbvt.step/tps77033dbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
d58d1a10b7df9477, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# TPS77033DBVT
**Texas Instruments** · Linear Voltage Regulators (LDO) · SOT-23-5
TPS77033DBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply voltage; recommended input range is 2.7 V to 10 V, and the absolute maximum input voltage is 13.5 V. |
| 2 | GND | power_in | Ground terminal, the network ground reference for all voltages on the device. |
| 3 | EN | input | Logic enable input that shuts the regulator down into sleep mode when pulled low; voltage on EN must stay between -0.3 V and VI + 0.3 V. |
| 4 | NC | unconnected | No internal connection on fixed-voltage options such as the TPS77033; pin 4 is FB (feedback) only on the adjustable TPS77001. |
| 5 | OUT | power_out | Regulated output voltage, supplying up to 50 mA continuous output current; voltage on OUT is rated to 7 V maximum. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (TJ = -40°C to 125°C) | VO | 3.201 | | 3.399 | V | TJ = -40°C to 125°C, 4.3 V < VIN < 10 V | 4 |
| Output voltage line regulation (see Notes 4 and 5) | ∆VO/VO | | | 0.1 | %/V | VO + 1 V < VI ≤ 10 V, TJ = -40°C to 125°C | 4 |
| Quiescent current (GND current) | | | | 28 | µA | EN = 0V, IO = 50mA, TJ = -40°C to 125°C | 4 |
| Output current limit | | 350 | | 750 | mA | VO = 0V | 4 |
| Standby current | | | | 2 | µA | TJ = -40°C to 125°C | 4 |
| Dropout voltage | | | | 100 | mV | IO = 50 mA TJ = -40°C to 125°C | 5 |
| High level enable input voltage | | 1.7 | | | V | 2.7 V < VI < 10 V | 5 |
| Low level enable input voltage | | | | 0.9 | V | 2.7 V < VI < 10 V | 5 |
| Input current (EN) | | -1 | 0 | 1 | µA | EN = 0 V | 5 |
| Input current (EN) | | -1 | | 1 | µA | EN = VI | 5 |
| Input voltage range | VI | -0.3 | | 13.5 | V | | 3 |
| Voltage range at EN | VEN | -0.3 | | | V | maximum printed as VI + 0.3 V | 3 |
| Voltage on OUT, FB | | | | 7 | V | | 3 |
| ESD rating, HBM | | | | 2 | kV | HBM | 3 |
| Operating virtual junction temperature range | TJ | -40 | | 150 | °C | | 3 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 3 |
| Input voltage, VI | VI | 2.7 | | 10 | V | | 3 |
| Output voltage range, VO | VO | 1.2 | | 5.5 | V | | 3 |
| Continuous output current, IO | IO | 0 | | 50 | mA | | 3 |
| Operating junction temperature, TJ | TJ | -40 | | 125 | °C | | 3 |
| Junction-to-ambient thermal resistance, RθJA (Low K board) | RθJA | | 259 | | °C/W | Low K board, DBV package | 3 |
| Junction-to-ambient thermal resistance, RθJA (High K board) | RθJA | | 180 | | °C/W | High K board, DBV package | 3 |
| Junction-to-case thermal resistance, RθJC | RθJC | | 65.8 | | °C/W | DBV package | 3 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `TPS77033DBVT`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tps77033dbvt-etched.step` / `tps77033dbvt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps77033dbvt.step` / `tps77033dbvt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps77033.pdf) (24 pp, sha256 `d58d1a10b7df9477`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/tps77033dbvt-datasheet.pdf)