main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps77033dbvt: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tps77033dbvt-etched.glb tps77033dbvt: factory component page (tier=mfr) · Ray
tps77033dbvt-etched.step tps77033dbvt: factory component page (tier=mfr) · Ray
tps77033dbvt-hero.glb tps77033dbvt: hero GLB from the etched model (keeps the MPN mark) · Ray
tps77033dbvt-hero.overlay.json tps77033dbvt: hero GLB from the etched model (keeps the MPN mark) · Ray
tps77033dbvt.glb Publish 0.1.0 · Ray
tps77033dbvt.kicad_mod Publish 0.1.0 · Ray
tps77033dbvt.kicad_sym Publish 0.1.0 · Ray
tps77033dbvt.lbr Publish 0.1.0 · Ray
tps77033dbvt.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

TPS77033DBVT

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

TPS77033DBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN power_in Input supply voltage; recommended input range is 2.7 V to 10 V, and the absolute maximum input voltage is 13.5 V.
2 GND power_in Ground terminal, the network ground reference for all voltages on the device.
3 EN input Logic enable input that shuts the regulator down into sleep mode when pulled low; voltage on EN must stay between -0.3 V and VI + 0.3 V.
4 NC unconnected No internal connection on fixed-voltage options such as the TPS77033; pin 4 is FB (feedback) only on the adjustable TPS77001.
5 OUT power_out Regulated output voltage, supplying up to 50 mA continuous output current; voltage on OUT is rated to 7 V maximum.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage (TJ = -40°C to 125°C) VO 3.201 3.399 V TJ = -40°C to 125°C, 4.3 V < VIN < 10 V 4
Output voltage line regulation (see Notes 4 and 5) ∆VO/VO 0.1 %/V VO + 1 V < VI ≤ 10 V, TJ = -40°C to 125°C 4
Quiescent current (GND current) 28 µA EN = 0V, IO = 50mA, TJ = -40°C to 125°C 4
Output current limit 350 750 mA VO = 0V 4
Standby current 2 µA TJ = -40°C to 125°C 4
Dropout voltage 100 mV IO = 50 mA TJ = -40°C to 125°C 5
High level enable input voltage 1.7 V 2.7 V < VI < 10 V 5
Low level enable input voltage 0.9 V 2.7 V < VI < 10 V 5
Input current (EN) -1 0 1 µA EN = 0 V 5
Input current (EN) -1 1 µA EN = VI 5
Input voltage range VI -0.3 13.5 V 3
Voltage range at EN VEN -0.3 V maximum printed as VI + 0.3 V 3
Voltage on OUT, FB 7 V 3
ESD rating, HBM 2 kV HBM 3
Operating virtual junction temperature range TJ -40 150 °C 3
Storage temperature range Tstg -65 150 °C 3
Input voltage, VI VI 2.7 10 V 3
Output voltage range, VO VO 1.2 5.5 V 3
Continuous output current, IO IO 0 50 mA 3
Operating junction temperature, TJ TJ -40 125 °C 3
Junction-to-ambient thermal resistance, RθJA (Low K board) RθJA 259 °C/W Low K board, DBV package 3
Junction-to-ambient thermal resistance, RθJA (High K board) RθJA 180 °C/W High K board, DBV package 3
Junction-to-case thermal resistance, RθJC RθJC 65.8 °C/W DBV package 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS77033DBVT
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps77033dbvt-etched.step / tps77033dbvt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps77033dbvt.step / tps77033dbvt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 d58d1a10b7df9477, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF