main
Ray Publish 0.1.0 df48f7e

TPS76950QDBVRG4Q1

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

TPS76950QDBVRG4Q1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input supply pin; place the input capacitor as close as possible to the IN and GND pins, using the recommended CIN of 1 µF minimum from the Recommended Operating Conditions, and the new-chip input range is 2.5 V to 16 V.
2 GND power_in Ground reference for the device; all voltages are referenced to GND, per the absolute maximum ratings note.
3 EN input Active-low enable: driving EN below the low-level enable threshold turns the output on and driving it above the high-level threshold disables the device, and on the new-chip version an internal pull-up disables the LDO if this pin is left floating.
4 NC unconnected For the fixed-voltage version (the TPS76950 is fixed), this pin is not connected on the new chip and must not be connected; the datasheet pin table labels it FB/NC, with FB used only on the adjustable TPS76901-Q1 where it must not be left floating.
5 OUT power_out Regulated output; place the output capacitor as close as possible to the OUT and GND pins, using at least 2.2 µF for the new chip with ESR within the supported range for stability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy, fixed (old chip), relative to VOUT(nom) VOUT 0.97 1.03 × VOUT(nom) 10µA ≤ IOUT ≤ 100mA, VOUT(nom)+1V < VIN < 10V, TJ = -40°C to 125°C 5
Output current limit (old chip) ICL 350 750 mA VOUT = 0V 6
Standby current (old chip) ISTANDBY 1 2 µA EN = VIN, 2.7V < VIN < 10V 6
EN high-level input voltage (old chip) 1.7 V 2.7V ≤ VIN ≤ 10V 6
EN low-level input voltage (old chip) 0.9 V 2.7V ≤ VIN ≤ 10V 6
EN input current (old chip) IEN -1 0 1 µA EN = 0V 6
EN input current (old chip) IEN -1 1 µA EN = VIN 6
Dropout voltage (old chip, fixed 5.0 V) VDO 85 mV IOUT = 50mA, TJ = -40℃ 至 125℃ 7
Dropout voltage (old chip, fixed 5.0 V) VDO 170 mV IOUT = 100mA, TJ = -40℃ 至 125℃ 7
Input voltage, recommended (old chip) VIN 2.7 10 V Old chip 4
Output current, recommended IOUT 0 100 mA 4
Input capacitor, recommended CIN 1 µF Derated to 50% of nominal 4
Output capacitor, recommended (old chip) COUT 4.7 µF Old chip, derated to 50% of nominal 4
ESR range, recommended (old chip) ESR 0.2 10 Ω Old chip 4
Enable voltage, recommended (old chip) VEN 0 V Old chip, max = VIN 4
Operating junction temperature, recommended TJ -40 125 °C 4
Continuous input voltage (old chip) VIN -0.3 13.5 V Old chip 3
Output voltage (old chip) VOUT -0.3 7 V Old chip 3
EN pin voltage (old chip) VEN -0.3 V Old chip, max = VIN + 0.3 3
Operating junction temperature (old chip) TJ -40 150 °C Old chip 3
Storage temperature Tstg -65 150 °C 3
Junction-to-ambient thermal resistance (SOT-23-5, old chip) RθJA 204.6 °C/W JEDEC 2s2p board 4
Junction-to-case (top) thermal resistance (old chip) RθJC(top) 117.5 °C/W 4
Junction-to-board thermal resistance (old chip) RθJB 34.4 °C/W 4
Junction-to-top characterization parameter (old chip) ψJT 11.8 °C/W 4
Junction-to-board characterization parameter (old chip) ψJB 33.5 °C/W 4
Junction-to-case thermal resistance (dissipation table, old chip) RθJC 65.8 °C/W 5
Junction-to-ambient thermal resistance (dissipation table, old chip) RθJA 259 °C/W JEDEC low-K (1s) board 5
Junction-to-ambient thermal resistance (dissipation table, old chip) RθJA 180 °C/W JEDEC high-K (2s2p) board 5

CAD (KiCad official)

  • Symbol: TPS76950QDBVRG4Q1
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps76950qdbvrg4q1-etched.step / tps76950qdbvrg4q1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps76950qdbvrg4q1.step / tps76950qdbvrg4q1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (45 pp, sha256 50207086698c1025, retrieved 2026-11-11, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF