Generated by kicad-footprint-generator · KiCad file format 20260206
TPS76950QDBVRG4Q1
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
TPS76950QDBVRG4Q1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply pin; place the input capacitor as close as possible to the IN and GND pins, using the recommended CIN of 1 µF minimum from the Recommended Operating Conditions, and the new-chip input range is 2.5 V to 16 V. |
| 2 | GND | power_in | Ground reference for the device; all voltages are referenced to GND, per the absolute maximum ratings note. |
| 3 | EN | input | Active-low enable: driving EN below the low-level enable threshold turns the output on and driving it above the high-level threshold disables the device, and on the new-chip version an internal pull-up disables the LDO if this pin is left floating. |
| 4 | NC | unconnected | For the fixed-voltage version (the TPS76950 is fixed), this pin is not connected on the new chip and must not be connected; the datasheet pin table labels it FB/NC, with FB used only on the adjustable TPS76901-Q1 where it must not be left floating. |
| 5 | OUT | power_out | Regulated output; place the output capacitor as close as possible to the OUT and GND pins, using at least 2.2 µF for the new chip with ESR within the supported range for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy, fixed (old chip), relative to VOUT(nom) | VOUT | 0.97 | 1.03 | × VOUT(nom) | 10µA ≤ IOUT ≤ 100mA, VOUT(nom)+1V < VIN < 10V, TJ = -40°C to 125°C | 5 | |
| Output current limit (old chip) | ICL | 350 | 750 | mA | VOUT = 0V | 6 | |
| Standby current (old chip) | ISTANDBY | 1 | 2 | µA | EN = VIN, 2.7V < VIN < 10V | 6 | |
| EN high-level input voltage (old chip) | 1.7 | V | 2.7V ≤ VIN ≤ 10V | 6 | |||
| EN low-level input voltage (old chip) | 0.9 | V | 2.7V ≤ VIN ≤ 10V | 6 | |||
| EN input current (old chip) | IEN | -1 | 0 | 1 | µA | EN = 0V | 6 |
| EN input current (old chip) | IEN | -1 | 1 | µA | EN = VIN | 6 | |
| Dropout voltage (old chip, fixed 5.0 V) | VDO | 85 | mV | IOUT = 50mA, TJ = -40℃ 至 125℃ | 7 | ||
| Dropout voltage (old chip, fixed 5.0 V) | VDO | 170 | mV | IOUT = 100mA, TJ = -40℃ 至 125℃ | 7 | ||
| Input voltage, recommended (old chip) | VIN | 2.7 | 10 | V | Old chip | 4 | |
| Output current, recommended | IOUT | 0 | 100 | mA | 4 | ||
| Input capacitor, recommended | CIN | 1 | µF | Derated to 50% of nominal | 4 | ||
| Output capacitor, recommended (old chip) | COUT | 4.7 | µF | Old chip, derated to 50% of nominal | 4 | ||
| ESR range, recommended (old chip) | ESR | 0.2 | 10 | Ω | Old chip | 4 | |
| Enable voltage, recommended (old chip) | VEN | 0 | V | Old chip, max = VIN | 4 | ||
| Operating junction temperature, recommended | TJ | -40 | 125 | °C | 4 | ||
| Continuous input voltage (old chip) | VIN | -0.3 | 13.5 | V | Old chip | 3 | |
| Output voltage (old chip) | VOUT | -0.3 | 7 | V | Old chip | 3 | |
| EN pin voltage (old chip) | VEN | -0.3 | V | Old chip, max = VIN + 0.3 | 3 | ||
| Operating junction temperature (old chip) | TJ | -40 | 150 | °C | Old chip | 3 | |
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Junction-to-ambient thermal resistance (SOT-23-5, old chip) | RθJA | 204.6 | °C/W | JEDEC 2s2p board | 4 | ||
| Junction-to-case (top) thermal resistance (old chip) | RθJC(top) | 117.5 | °C/W | 4 | |||
| Junction-to-board thermal resistance (old chip) | RθJB | 34.4 | °C/W | 4 | |||
| Junction-to-top characterization parameter (old chip) | ψJT | 11.8 | °C/W | 4 | |||
| Junction-to-board characterization parameter (old chip) | ψJB | 33.5 | °C/W | 4 | |||
| Junction-to-case thermal resistance (dissipation table, old chip) | RθJC | 65.8 | °C/W | 5 | |||
| Junction-to-ambient thermal resistance (dissipation table, old chip) | RθJA | 259 | °C/W | JEDEC low-K (1s) board | 5 | ||
| Junction-to-ambient thermal resistance (dissipation table, old chip) | RθJA | 180 | °C/W | JEDEC high-K (2s2p) board | 5 |
CAD (KiCad official)
- Symbol:
TPS76950QDBVRG4Q1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps76950qdbvrg4q1-etched.step/tps76950qdbvrg4q1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps76950qdbvrg4q1.step/tps76950qdbvrg4q1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
50207086698c1025, retrieved 2026-11-11, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).