main
History Download
Ray Publish 0.1.0 8710058

TPS76750QDR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8

TPS76750QDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Regulator ground pin for the device.
2 EN input Active-high shutdown input: a TTL high (at least 1.7 V) shuts the regulator down to sleep mode, a low level of 0.9 V or less keeps it on, and EN should be tied to ground if the shutdown feature is not used.
3 IN power_in Input voltage pin with a recommended operating range of 2.7 V to 10 V and an absolute maximum input voltage of 13.5 V.
4 IN power_in Input voltage pin with a recommended operating range of 2.7 V to 10 V and an absolute maximum input voltage of 13.5 V.
5 OUT power_out Regulated 5.0 V output for the TPS76750, supplying up to 1.0 A and requiring an output capacitor of at least 10 µF with ESR between 50 mΩ and 1.5 Ω.
6 OUT power_out Regulated 5.0 V output for the TPS76750, supplying up to 1.0 A and requiring an output capacitor of at least 10 µF with ESR between 50 mΩ and 1.5 Ω.
7 FB/NC input Feedback input used only by the adjustable TPS76701; on fixed-output options such as the TPS76750 this pin is no connect.
8 RESET output Open-drain reset output that pulls low when the output drops to 92% to 98% of nominal, with a 200 ms delay, and requires an external pullup resistor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage (TPS76750) VO 4.9 5.1 V 10 µA to 1 A load; TJ = −40°C to 125°C, 6.0 V < VIN < 10 V 6
Quiescent current (GND current) 125 µA EN = 0V, IO = 1 A, TJ = −40°C to 125°C 6
Dropout voltage (TPS76750) 380 mV IO = 1 A, TJ = −40°C to 125°C 7
Output current limit 1.2 1.7 2 A VO = 0 V 6
Standby current 10 µA EN = VI, TJ = −40°C to 125°C, 2.7 V < VI < 10 V 6
High level enable input voltage 1.7 V 6
Low level enable input voltage 0.9 V 6
Trip threshold voltage (RESET) 92 98 % VO decreasing 6
Output low voltage (RESET) 0.15 0.4 V VI = 2.7 V, IO(RESET) = 1 mA 6
Input current (EN) -1 0 1 µA EN = 0 V 6
Input current (EN) -1 1 µA EN = VI 6
Input voltage VI 2.7 10 V Maximum VIN = VOUT + VDO or 2.7 V, whichever is greater (footnote 1) 5
Output voltage range VO 1.2 5.5 V 5
Output current IO 0 1 A Continuous current limited by internal protection (footnote 2) 5
Operating junction temperature (recommended) TJ -40 125 °C 5
Input voltage range VI -0.3 13.5 V With respect to network terminal ground 5
Voltage range at EN -0.3 V 5
Maximum RESET voltage 16.5 V 5
Output voltage (OUT, FB) VO 7 V 5
Operating junction temperature range (absolute maximum) TJ -40 125 °C Operating free-air temperature range 5
Storage temperature range Tstg -65 150 °C 5
Junction-to-ambient thermal resistance (D, SOIC-8) RθJA 106.9 °C/W D (SOIC) 8-pin package 5
Junction-to-case (top) thermal resistance (D, SOIC-8) RθJC(top) 52.5 °C/W D (SOIC) 8-pin package 5
Junction-to-board thermal resistance (D, SOIC-8) RθJB 47.7 °C/W D (SOIC) 8-pin package 5
Junction-to-top characterization parameter (D, SOIC-8) ψJT 9 °C/W D (SOIC) 8-pin package 5
Junction-to-board characterization parameter (D, SOIC-8) ψJB 47.1 °C/W D (SOIC) 8-pin package 5

CAD (KiCad official)

  • Symbol: TPS76750QDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tps76750qdr-etched.step / tps76750qdr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps76750qdr.step / tps76750qdr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 8fecf68765895723, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF