3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS76750QDR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8
TPS76750QDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Regulator ground pin for the device. |
| 2 | EN | input | Active-high shutdown input: a TTL high (at least 1.7 V) shuts the regulator down to sleep mode, a low level of 0.9 V or less keeps it on, and EN should be tied to ground if the shutdown feature is not used. |
| 3 | IN | power_in | Input voltage pin with a recommended operating range of 2.7 V to 10 V and an absolute maximum input voltage of 13.5 V. |
| 4 | IN | power_in | Input voltage pin with a recommended operating range of 2.7 V to 10 V and an absolute maximum input voltage of 13.5 V. |
| 5 | OUT | power_out | Regulated 5.0 V output for the TPS76750, supplying up to 1.0 A and requiring an output capacitor of at least 10 µF with ESR between 50 mΩ and 1.5 Ω. |
| 6 | OUT | power_out | Regulated 5.0 V output for the TPS76750, supplying up to 1.0 A and requiring an output capacitor of at least 10 µF with ESR between 50 mΩ and 1.5 Ω. |
| 7 | FB/NC | input | Feedback input used only by the adjustable TPS76701; on fixed-output options such as the TPS76750 this pin is no connect. |
| 8 | RESET | output | Open-drain reset output that pulls low when the output drops to 92% to 98% of nominal, with a 200 ms delay, and requires an external pullup resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (TPS76750) | VO | 4.9 | 5.1 | V | 10 µA to 1 A load; TJ = −40°C to 125°C, 6.0 V < VIN < 10 V | 6 | |
| Quiescent current (GND current) | 125 | µA | EN = 0V, IO = 1 A, TJ = −40°C to 125°C | 6 | |||
| Dropout voltage (TPS76750) | 380 | mV | IO = 1 A, TJ = −40°C to 125°C | 7 | |||
| Output current limit | 1.2 | 1.7 | 2 | A | VO = 0 V | 6 | |
| Standby current | 10 | µA | EN = VI, TJ = −40°C to 125°C, 2.7 V < VI < 10 V | 6 | |||
| High level enable input voltage | 1.7 | V | 6 | ||||
| Low level enable input voltage | 0.9 | V | 6 | ||||
| Trip threshold voltage (RESET) | 92 | 98 | % | VO decreasing | 6 | ||
| Output low voltage (RESET) | 0.15 | 0.4 | V | VI = 2.7 V, IO(RESET) = 1 mA | 6 | ||
| Input current (EN) | -1 | 0 | 1 | µA | EN = 0 V | 6 | |
| Input current (EN) | -1 | 1 | µA | EN = VI | 6 | ||
| Input voltage | VI | 2.7 | 10 | V | Maximum VIN = VOUT + VDO or 2.7 V, whichever is greater (footnote 1) | 5 | |
| Output voltage range | VO | 1.2 | 5.5 | V | 5 | ||
| Output current | IO | 0 | 1 | A | Continuous current limited by internal protection (footnote 2) | 5 | |
| Operating junction temperature (recommended) | TJ | -40 | 125 | °C | 5 | ||
| Input voltage range | VI | -0.3 | 13.5 | V | With respect to network terminal ground | 5 | |
| Voltage range at EN | -0.3 | V | 5 | ||||
| Maximum RESET voltage | 16.5 | V | 5 | ||||
| Output voltage (OUT, FB) | VO | 7 | V | 5 | |||
| Operating junction temperature range (absolute maximum) | TJ | -40 | 125 | °C | Operating free-air temperature range | 5 | |
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Junction-to-ambient thermal resistance (D, SOIC-8) | RθJA | 106.9 | °C/W | D (SOIC) 8-pin package | 5 | ||
| Junction-to-case (top) thermal resistance (D, SOIC-8) | RθJC(top) | 52.5 | °C/W | D (SOIC) 8-pin package | 5 | ||
| Junction-to-board thermal resistance (D, SOIC-8) | RθJB | 47.7 | °C/W | D (SOIC) 8-pin package | 5 | ||
| Junction-to-top characterization parameter (D, SOIC-8) | ψJT | 9 | °C/W | D (SOIC) 8-pin package | 5 | ||
| Junction-to-board characterization parameter (D, SOIC-8) | ψJB | 47.1 | °C/W | D (SOIC) 8-pin package | 5 |
CAD (KiCad official)
- Symbol:
TPS76750QDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tps76750qdr-etched.step/tps76750qdr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps76750qdr.step/tps76750qdr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
8fecf68765895723, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).