TPS76630D

{
  "slug": "tps76630d",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps76630d",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps76630d.kicad_sym",
    "tps76630d.kicad_mod",
    "tps76630d.glb",
    "tps76630d.step",
    "tps76630d.lbr",
    "docs/hero.png",
    "docs/tps76630d-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps76630d-hero.glb",
    "tps76630d-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS76630D",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps766",
    "parts": {
      "symbol": "tps76630d.kicad_sym",
      "footprint": "tps76630d.kicad_mod",
      "model_3d": "tps76630d-hero.glb",
      "model_3d_plain": "tps76630d.glb",
      "model_3d_step": "tps76630d-etched.step",
      "model_3d_step_plain": "tps76630d.step",
      "lbr": "tps76630d.lbr"
    },
    "distributor_links": {
      "lcsc": "C2871442",
      "digikey": "2156-TPS76630D-ND",
      "mouser": "595-TPS76630D"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T17:02:56Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2156-TPS76630D-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS76630D",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC/FB",
        "type": "input",
        "description": "Adjustable version: feedback input to the control-loop error amplifier, which sets the output voltage through external resistors and must not be left floating; fixed version: not internally connected, so leave open or tie to ground for improved thermal performance."
      },
      {
        "number": "2",
        "name": "PG",
        "type": "output",
        "description": "Open-drain, active-high power-good output that requires an external pullup resistor, and should be grounded or left floating if power-good is not used."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; all device voltage limits are specified with respect to GND."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Enable input: driving low enables the device and driving high disables it, with the low and high thresholds listed in the Electrical Characteristics table."
      },
      {
        "number": "5",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin; use the input capacitor value from Recommended Operating Conditions and place it as close to IN and GND as possible, with the legacy-chip absolute maximum VIN of 13.5 V."
      },
      {
        "number": "6",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin; use the input capacitor value from Recommended Operating Conditions and place it as close to IN and GND as possible, with the legacy-chip absolute maximum VIN of 13.5 V."
      },
      {
        "number": "7",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output pin; use the output capacitor value from Recommended Operating Conditions and place it as close to OUT and GND as possible."
      },
      {
        "number": "8",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output pin; use the output capacitor value from Recommended Operating Conditions and place it as close to OUT and GND as possible."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 1 is NC for fixed-output versions and FB for the adjustable version. TPS76630D is presumably the; The part number TPS76630D has no M3 suffix, so per the Device Nomenclature table it appears to be th; The datasheet lists IN as type I, OUT as O, and PG as O, and FB/NC and EN as I. Types here follow Ki"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0657,
        "at": "2026-10-08T17:02:35"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps766",
        "pages": 45,
        "sha256": "43cfa370a86e4a2d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps76630d.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps76630d-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "64cd6754446459bf804933d4ad9694fb4580ed6015e4675ec6be2212ab52e6ce",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}