component
TPS76630D
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS76630D
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8
TPS76630D from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC/FB | input | Adjustable version: feedback input to the control-loop error amplifier, which sets the output voltage through external resistors and must not be left floating; fixed version: not internally connected, so leave open or tie to ground for improved thermal performance. |
| 2 | PG | output | Open-drain, active-high power-good output that requires an external pullup resistor, and should be grounded or left floating if power-good is not used. |
| 3 | GND | power_in | Ground pin; all device voltage limits are specified with respect to GND. |
| 4 | EN | input | Enable input: driving low enables the device and driving high disables it, with the low and high thresholds listed in the Electrical Characteristics table. |
| 5 | IN | power_in | Input supply pin; use the input capacitor value from Recommended Operating Conditions and place it as close to IN and GND as possible, with the legacy-chip absolute maximum VIN of 13.5 V. |
| 6 | IN | power_in | Input supply pin; use the input capacitor value from Recommended Operating Conditions and place it as close to IN and GND as possible, with the legacy-chip absolute maximum VIN of 13.5 V. |
| 7 | OUT | power_out | Regulated output pin; use the output capacitor value from Recommended Operating Conditions and place it as close to OUT and GND as possible. |
| 8 | OUT | power_out | Regulated output pin; use the output capacitor value from Recommended Operating Conditions and place it as close to OUT and GND as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS76630D - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tps76630d-etched.step/tps76630d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps76630d.step/tps76630d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
43cfa370a86e4a2d, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).