main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps75215qpwpr: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tps75215qpwpr-etched.glb Publish 0.1.0 · Ray
tps75215qpwpr-etched.step tps75215qpwpr: factory component page (tier=mfr) · Ray
tps75215qpwpr-hero.glb tps75215qpwpr: hero GLB from the etched model (keeps the MPN mark) · Ray
tps75215qpwpr-hero.overlay.json Publish 0.1.0 · Ray
tps75215qpwpr.glb Publish 0.1.0 · Ray
tps75215qpwpr.kicad_mod Publish 0.1.0 · Ray
tps75215qpwpr.kicad_sym Publish 0.1.0 · Ray
tps75215qpwpr.lbr Publish 0.1.0 · Ray
tps75215qpwpr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 21 pins · Ray

TPS75215QPWPR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · HTSSOP-20-EP

TPS75215QPWPR from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND/HEATSINK power_in Ground/heatsink terminal that is internally connected to the thermal pad and IC substrate and may be connected to GND or left floating.
2 NC unconnected Not connected.
3 IN power_in Input voltage terminal with a recommended range of 2.7 V to 5.5 V, bypassed with a 0.22 µF to 1 µF capacitor placed as close to the input pins as possible.
4 IN power_in Input voltage terminal with a recommended range of 2.7 V to 5.5 V, bypassed with a 0.22 µF to 1 µF capacitor placed as close to the input pins as possible.
5 EN input Negative-polarity enable input: a logic low (VEN(LO) at most 0.7 V) enables the device and a logic high (VEN(HI) at least 2 V) shuts it down.
6 RESET output Open-drain, active-low reset output (TPS752xxQ) that goes high-impedance after a 100 ms delay when VOUT reaches 95% of its regulated value and requires an external pullup resistor.
7 FB/SENSE input Sense input for fixed-output options that must be connected to the regulator output as short as possible, with RC filtering not recommended because it may cause oscillation.
8 OUTPUT power_out Regulated output voltage that requires an output capacitor of at least 47 µF with ESR between 100 mΩ and 10 Ω connected to GND.
9 OUTPUT power_out Regulated output voltage that requires an output capacitor of at least 47 µF with ESR between 100 mΩ and 10 Ω connected to GND.
10 GND/HEATSINK power_in Ground/heatsink terminal that is internally connected to the thermal pad and IC substrate and may be connected to GND or left floating.
11 GND/HEATSINK power_in Ground/heatsink terminal that is internally connected to the thermal pad and IC substrate and may be connected to GND or left floating.
12 NC unconnected Not connected.
13 NC unconnected Not connected.
14 NC unconnected Not connected.
15 NC unconnected Not connected.
16 NC unconnected Not connected.
17 GND power_in Ground terminal of the regulator.
18 NC unconnected Not connected.
19 NC unconnected Not connected.
20 GND/HEATSINK power_in Ground/heatsink terminal that is internally connected to the thermal pad and IC substrate and may be connected to GND or left floating.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-20-EP
Category Power Management (PMIC)
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VIN -0.3 6 V 2
Voltage range at EN -0.3 16.5 V 2
Maximum RESET voltage (TPS752xxQ) 16.5 V 2
Output voltage range at OUT, FB 5.5 V 2
Operating virtual junction temperature range TJ -40 125 °C 2
Storage junction temperature range TSTG -65 150 °C 2
Input voltage range VIN 2.7 5.5 V 3
Output voltage range VOUT 1.5 5 V 3
Output current IOUT 0 2 A 3
Operating virtual junction temperature TJ -40 125 °C 3
1.5 V output voltage VOUT 1.47 1.5 1.53 V 2.7 V < VIN < 5.5 V 4
Ground pin current IGND 75 125 μA IOUT = 1 mA to 2 A 4
Output voltage line regulation ΔVOUT%/VOUT 0.01 0.1 %/V VOUT + 1 V < VIN ≤ 5 V 4
Standby current ISTBY 1 10 μA EN = VIN 4
Output current limit ICL 3.3 4.5 A VOUT = 0 V 4
High-level enable input voltage VEN(HI) 2 V 4
Low-level enable input voltage VEN(LO) 0.7 V 4
Input current (EN) -1 1 μA EN = VIN 4
Input current (EN) -1 0 1 μA EN = 0 V 4
Minimum input voltage for valid RESET VRESET 1 1.3 V IOUT(RESET) = 300 μA, V(RESET) ≤ 0.8 V 4
RESET trip threshold voltage 92 98 %VOUT VOUT decreasing 4
RESET output low voltage 0.15 0.4 V VIN = 2.7 V, IOUT(RESET) = 1 mA 4
Thermal resistance junction-to-ambient (PWP, text) RθJA 34.6 °C/W 20-terminal PWP, no airflow (stated in text) 18

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Exposed pad mounting 63/67 tin/lead (Sn/Pb) solder Heatsink Area 21

CAD (KiCad official)

  • Symbol: TPS75215QPWPR
  • Footprint: Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm
  • 3D model: HTSSOP-20-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps75215qpwpr-etched.step / tps75215qpwpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps75215qpwpr.step / tps75215qpwpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 ddac75f3b3fd04bf, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF