main
Ray tps74601pdrvt: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 5f2b673
{
  "slug": "tps74601pdrvt",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps74601pdrvt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps74601pdrvt.kicad_sym",
    "tps74601pdrvt.kicad_mod",
    "tps74601pdrvt.glb",
    "tps74601pdrvt.step",
    "tps74601pdrvt.lbr",
    "docs/hero.png",
    "docs/tps74601pdrvt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TPS74601PDRVT",
    "manufacturer": "Texas Instruments",
    "package": "WSON-6-EP(2x2)",
    "pin_count": 7,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps746",
    "parts": {
      "symbol": "tps74601pdrvt.kicad_sym",
      "footprint": "tps74601pdrvt.kicad_mod",
      "model_3d": "tps74601pdrvt-etched.glb",
      "model_3d_plain": "tps74601pdrvt.glb",
      "model_3d_step": "tps74601pdrvt-etched.step",
      "model_3d_step_plain": "tps74601pdrvt.step",
      "lbr": "tps74601pdrvt.lbr"
    },
    "distributor_links": {
      "lcsc": "C2868202",
      "digikey": "296-53055-2-ND",
      "mouser": "595-TPS74601PDRVT"
    },
    "distributor_check": {
      "checked_at": "2026-09-27T04:02:05Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-53055-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS74601PDRVT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output voltage pin capable of 0-1 A output current at 0.55-5.5 V; requires output capacitor (≥0.47 µF) to GND for stability."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin for control loop error amplifier with reference voltage (VFB) of 0.55 V; external resistor divider sets output voltage from 0.55 V to 5.5 V."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; connect thermal pad to large area GND plane for improved thermal performance."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Enable input pin; drive greater than VEN(HI) = 1.0 V to enable regulator, or less than VEN(LO) = 0.3 V to disable; toggle frequency up to 10 kHz."
      },
      {
        "number": "5",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that pulls low when VOUT < PGLTH (87-93% of VOUT) or releases to high-impedance when VOUT > PGHTH (89-95% of VOUT); can sink up to 1 mA."
      },
      {
        "number": "6",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin accepting 1.5 V to 6.0 V; place input capacitor (≥1 µF) close to device for best transient response and minimized input impedance."
      },
      {
        "number": "7",
        "name": "Thermal Pad",
        "type": "passive",
        "description": "Exposed thermal pad for heat dissipation; must be soldered to large area GND plane with plated vias for thermal conductance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 35,
        "cost_usd": 0.3634,
        "at": "2026-09-27T04:01:49"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps746",
        "pages": 35,
        "sha256": "ed98532d4b1bf5b4",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps74601pdrvt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a159a524ab16d3406353a16f8c20b59f5679eea26e2d41174628288b5b9da702",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps74601pdrvt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "30edb77a8bb941cc437fd47cc27422756934776a65f86173d9620d6f231f8fa7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}