Generated by kicad-footprint-generator · KiCad file format 20260206
TPS74601PBDRVR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6-EP(2x2)
TPS74601PBDRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Regulated output voltage pin supporting 0-1 A maximum output current; requires 1-220 μF ceramic capacitor to GND for stability. |
| 2 | FB | input | Feedback input to control loop error amplifier with 0.55 V setpoint for setting adjustable output voltage from 0.55-5.5 V via external resistor divider. |
| 3 | GND | power_in | Ground reference pin for all regulator circuits and bias network. |
| 4 | EN | input | Enable input; drive above VEN(HI)=1.0 V to enable regulator output, below VEN(LO)=0.3 V to disable output and activate internal pulldown discharge to GND. |
| 5 | PG | output | Open-drain power-good output; asserts low (≤300 mV) when VOUT falls below PGLTH (87-93% nominal), high-impedance when above PGHTH (89-95%). |
| 6 | IN | power_in | Supply input voltage pin accepting 1.5-6.0 V; requires ≥1 μF ceramic input capacitor to GND for transient response and impedance minimization. |
| 7 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VIN | -0.3 | 6.5 | V | 3 | ||
| Enable voltage | VEN | -0.3 | 6.5 | V | 3 | ||
| Power-good voltage | VPG | -0.3 | 6 | V | 3 | ||
| Output voltage | VOUT | -0.3 | V | 3 | |||
| Power-good current | -10 | 10 | mA | 3 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Input voltage | VIN | 1.5 | 6 | V | 4 | ||
| Output voltage | VOUT | 0.55 | 5.5 | V | 4 | ||
| Output current | IOUT | 0 | 1 | A | 4 | ||
| Output capacitor | COUT | 1 | 220 | µF | 4 | ||
| Enable voltage | VEN | 0 | 6 | V | 4 | ||
| PG voltage | VPG | 0 | 6 | V | 4 | ||
| Junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Output accuracy | -0.7 | 0.7 | % | TJ = 25°C | 4 | ||
| Output accuracy | -1 | 1 | % | –40°C ≤ TJ ≤ +85°C | 4 | ||
| Output accuracy | -1.5 | 1.5 | % | –40°C ≤ TJ ≤ +125°C | 4 | ||
| Line regulation | 2 | 7.5 | mV | VOUT(NOM) + 0.5 V ≤ VIN ≤ 6.0 V | 4 | ||
| Ground current | IGND | 10 | 25 | µA | IOUT = 0 mA, TJ = 25°C | 4 | |
| Shutdown current | ISHDN | 0.1 | 1 | µA | VEN ≤ 0.3 V, 1.5 V ≤ VIN ≤ 6.0 V | 5 | |
| Feedback pin current | IFB | 0.01 | 0.1 | µA | 5 | ||
| Output current limit | ICL | 1.22 | 1.44 | 1.83 | A | VOUT = VOUT(NOM) - 0.2 V, VOUT < 1.5 V | 5 |
| Dropout voltage | VDO | 896 | 1050 | mV | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 0.65 V ≤ VOUT < 0.8 V | 5 | |
| Dropout voltage | VDO | 765 | 920 | mV | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 0.8 V ≤ VOUT < 0.9 V | 5 | |
| Dropout voltage | VDO | 700 | 850 | mV | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 0.9 V ≤ VOUT < 1.0 V | 5 | |
| Dropout voltage | VDO | 600 | 750 | mV | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 1.0 V ≤ VOUT < 1.2 V | 5 | |
| Dropout voltage | VDO | 464 | 585 | mV | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 1.2 V ≤ VOUT < 1.5 V | 5 | |
| Dropout voltage | VDO | 332 | 440 | mV | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 1.5 V ≤ VOUT < 1.8 V | 5 | |
| Dropout voltage | VDO | 264 | 360 | mV | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 1.8 V ≤ VOUT < 2.5 V | 5 | |
| Dropout voltage | VDO | 193 | 270 | mV | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 2.5 V ≤ VOUT < 3.3 V | 5 | |
| Dropout voltage | VDO | 161 | 225 | mV | IOUT = 1 A, –40°C ≤ TJ ≤ +125°C, VOUT = 0.95 × VOUT(NOM), 3.3 V ≤ VOUT ≤ 5.5 V | 5 | |
| Undervoltage lockout, VIN rising | VUVLO | 1.21 | 1.33 | 1.47 | V | VIN rising | 5 |
| Undervoltage lockout, VIN falling | VUVLO | 1.17 | 1.29 | 1.42 | V | VIN falling | 5 |
| PG high threshold | PGHTH | 89 | 94 | 95 | %VOUT | VOUT increasing | 5 |
| PG low threshold | PGLTH | 87 | 92 | 93 | %VOUT | VOUT decreasing | 5 |
| PG delay time rising (TPS746) | tPGDH | 135 | 165 | 178 | µs | Time from 92% VOUT to 20% of PG | 6 |
| PG delay time falling | tPGDL | 1.5 | 7 | 10 | µs | Time from 90% VOUT to 80% of PG | 6 |
| Junction-to-ambient thermal resistance | RθJA | 80.3 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 98.7 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 44.8 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 6.1 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 45 | °C/W | 4 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 20.8 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
TPS74601PBDRVR - Footprint:
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps74601pbdrvr-etched.step/tps74601pbdrvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps74601pbdrvr.step/tps74601pbdrvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
ed98532d4b1bf5b4, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).