main
Ray Publish 0.1.0 e38fcbe
{
  "slug": "tps74501pdrvt",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Linear Voltage Regulators (LDO), WSON-6(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "tps74501pdrvt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps74501pdrvt.kicad_sym",
    "tps74501pdrvt.kicad_mod",
    "tps74501pdrvt.glb",
    "tps74501pdrvt.step",
    "tps74501pdrvt.lbr",
    "docs/hero.png",
    "docs/tps74501pdrvt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps74501pdrvt-hero.glb",
    "tps74501pdrvt-hero.overlay.json",
    "tps74501pdrvt-etched.glb"
  ],
  "component": {
    "mpn": "TPS74501PDRVT",
    "manufacturer": "Texas Instruments",
    "package": "WSON-6(2x2)",
    "pin_count": 7,
    "category": "Power Supply Chip",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps745.pdf",
    "parts": {
      "symbol": "tps74501pdrvt.kicad_sym",
      "footprint": "tps74501pdrvt.kicad_mod",
      "model_3d": "tps74501pdrvt-hero.glb",
      "model_3d_plain": "tps74501pdrvt-etched.glb",
      "model_3d_step": "tps74501pdrvt-etched.step",
      "model_3d_step_plain": "tps74501pdrvt.step",
      "lbr": "tps74501pdrvt.lbr"
    },
    "distributor_links": {
      "lcsc": "C2876249",
      "digikey": "296-53053-2-ND",
      "mouser": "595-TPS74501PDRVT"
    },
    "distributor_check": {
      "checked_at": "2026-10-26T18:40:40Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-53053-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TPS74501PDRVT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output voltage pin; a capacitor (recommended 1 µF to 220 µF, minimum derated 0.47 µF) is required from OUT to ground for stability."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Input to the control loop error amplifier used to set the LDO output voltage (0.55 V to 5.5 V adjustable range); absolute maximum -0.3 V to 2 V."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Enable pin; drive above VEN(HI) to turn on the regulator and below VEN(LO) to put the LDO into shutdown mode, with a 0 V to 6.0 V recommended range."
      },
      {
        "number": "5",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that monitors the feedback pin voltage to indicate output status, with 0 V to 6.0 V recommended PG voltage and ±10 mA maximum current."
      },
      {
        "number": "6",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin with 1.5 V to 6.0 V recommended range; use a 1 µF or larger ceramic capacitor close to the device."
      },
      {
        "number": "7",
        "name": "Thermal pad",
        "type": "passive",
        "description": "Connect the thermal pad to a large area GND plane for improved thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The thermal pad is printed as 'Pad' with no pin number. The number '7' is a placeholder, so confirm ; The datasheet pin table shows no I/O type for the FB and GND pins ('—'). Types were assigned from th"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0685,
        "at": "2026-10-26T18:40:25"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps745.pdf",
        "pages": 34,
        "sha256": "8ad57af9888e85bc",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps74501pdrvt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a159a524ab16d3406353a16f8c20b59f5679eea26e2d41174628288b5b9da702",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps74501pdrvt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9763c1a0b3e568011bbe933d7c8529b8b3ca7ba0146ebf07af2460fc652dfa9b",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}