component
TPS73630DBVT
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
TPS73630DBVT
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
TPS73630DBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Input supply pin, specified for 1.7 V to 5.5 V with an absolute maximum of -0.3 V to 6 V, and a low-ESR input capacitor of 0.1 µF to 1 µF is recommended near the regulator. |
| 2 | GND | power_in | Ground pin, which should connect directly to the bypass capacitor grounds and to the PCB ground plane for best AC performance (PSRR, noise, transient response). |
| 3 | EN | input | Active-high enable input compatible with TTL-CMOS levels, where above 1.7 V (min) turns the regulator on and below 0.5 V (max) shuts it down, and it should be tied to IN if shutdown is not used. |
| 4 | NR | passive | Noise-reduction pin for the fixed-voltage version only, where an external capacitor from NR to GND bypasses the internal bandgap noise and reduces output noise (for example, 10 nF gives about 8.5 × VOUT µVRMS versus 27 × VOUT without it). |
| 5 | OUT | output | Regulator output, which is stable without any output capacitor and delivers up to 400 mA over the recommended operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TPS73630DBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tps73630dbvt-etched.step/tps73630dbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps73630dbvt.step/tps73630dbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (49 pp, sha256
5ed5c95a399b519d, retrieved 2026-10-09, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS73630DBVT
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
TPS73630DBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Input supply pin, specified for 1.7 V to 5.5 V with an absolute maximum of -0.3 V to 6 V, and a low-ESR input capacitor of 0.1 µF to 1 µF is recommended near the regulator. |
| 2 | GND | power_in | Ground pin, which should connect directly to the bypass capacitor grounds and to the PCB ground plane for best AC performance (PSRR, noise, transient response). |
| 3 | EN | input | Active-high enable input compatible with TTL-CMOS levels, where above 1.7 V (min) turns the regulator on and below 0.5 V (max) shuts it down, and it should be tied to IN if shutdown is not used. |
| 4 | NR | passive | Noise-reduction pin for the fixed-voltage version only, where an external capacitor from NR to GND bypasses the internal bandgap noise and reduces output noise (for example, 10 nF gives about 8.5 × VOUT µVRMS versus 27 × VOUT without it). |
| 5 | OUT | output | Regulator output, which is stable without any output capacitor and delivers up to 400 mA over the recommended operating range. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## CAD (KiCad official)
- Symbol: `TPS73630DBVT`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `tps73630dbvt-etched.step` / `tps73630dbvt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps73630dbvt.step` / `tps73630dbvt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps736) (49 pp, sha256 `5ed5c95a399b519d`, retrieved 2026-10-09, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps73630dbvt-datasheet.pdf)