main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps73101mdbvrep: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tps73101mdbvrep-etched.glb tps73101mdbvrep: factory component page (tier=mfr) · Ray
tps73101mdbvrep-etched.step tps73101mdbvrep: factory component page (tier=mfr) · Ray
tps73101mdbvrep-hero.glb tps73101mdbvrep: hero GLB from the etched model (keeps the MPN mark) · Ray
tps73101mdbvrep-hero.overlay.json tps73101mdbvrep: hero GLB from the etched model (keeps the MPN mark) · Ray
tps73101mdbvrep.glb Publish 0.1.0 · Ray
tps73101mdbvrep.kicad_mod Publish 0.1.0 · Ray
tps73101mdbvrep.kicad_sym Publish 0.1.0 · Ray
tps73101mdbvrep.lbr Publish 0.1.0 · Ray
tps73101mdbvrep.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

TPS73101MDBVREP

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

TPS73101MDBVREP from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN power_in Unregulated input supply to the regulator.
2 GND power_in Ground reference pin for the regulator.
3 EN input Driving EN high turns the regulator on and driving it low puts it into shutdown mode; EN can be connected to IN if not used.
4 FB input Adjustable-version input to the control-loop error amplifier, used to set the output voltage; for the TPS73101 (adjustable) this is pin 4 and it is not the NR pin used on fixed-voltage versions.
5 OUT power_out Output of the regulator, which has no output capacitor requirement for stability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VIN 1.7 5.5 V 4
Internal reference (TPS73101) VFB 1.198 1.2 1.21 V TA = 25°C 4
Nominal output voltage accuracy VOUT -0.5 0.5 % TA = 25°C 4
Output voltage accuracy over VIN, IOUT and temperature VOUT -1 1 % VOUT + 0.5 V ≤ VIN ≤ 5.5 V, 10 mA ≤ IOUT ≤ 150 mA 4
Dropout voltage VDO 30 100 mV IOUT = 150 mA (VIN = VOUT (nom), 0.1 V) 4
Output current limit ICL 150 360 500 mA VOUT = 0.9 × VOUT(nom) 4
Ground pin current IGND 400 550 μA IOUT = 10 mA (IQ) 4
Ground pin current IGND 550 750 μA IOUT = 150 mA 4
Shutdown current (IGND) ISHDN 0.02 1 μA VEN ≤ 0.5 V, VOUT ≤ VIN ≤ 5.5 V 4
FB pin current (TPS73101) IFB 0.1 0.475 μA 4
Enable high (enabled) VEN(HI) 1.7 V 4
Enable low (shutdown) VEN(LO) 0 0.5 V 4
Enable pin current (enabled) IEN(HI) 0.02 0.1 μA VEN = 5.5 V 4
Operating ambient temperature TA -55 125 °C 4
VIN range (absolute maximum) VIN -0.3 6 V over operating junction temperature range 3
VEN range (absolute maximum) VEN -0.3 6 V over operating junction temperature range 3
VOUT range (absolute maximum) VOUT -0.3 5.5 V over operating junction temperature range 3
Ambient temperature range (absolute maximum) TA -55 150 °C 3
Storage temperature range -65 150 °C 3
ESD rating, HBM 2 kV 3
ESD rating, CDM 500 V 3
Junction-to-ambient thermal resistance (DBV, Low-K board) RθJA 255 °C/W JEDEC Low-K (1s) board 3
Junction-to-ambient thermal resistance (DBV, High-K board) RθJA 180 °C/W JEDEC High-K (2s2p) board 3
Junction-to-case thermal resistance (DBV) RθJC 64 °C/W 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper out of the IN pin due to voltage applied on the OUT boards are shown in the Power Dissipation Ratings pin. There is additional current flowing into the OUT table. Using heavier copper increases the 15

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS73101MDBVREP
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps73101mdbvrep-etched.step / tps73101mdbvrep-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps73101mdbvrep.step / tps73101mdbvrep.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 91a072e675b121ff, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF