3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownTPS73101MDBVREP
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5
TPS73101MDBVREP from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Unregulated input supply to the regulator. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | EN | input | Driving EN high turns the regulator on and driving it low puts it into shutdown mode; EN can be connected to IN if not used. |
| 4 | FB | input | Adjustable-version input to the control-loop error amplifier, used to set the output voltage; for the TPS73101 (adjustable) this is pin 4 and it is not the NR pin used on fixed-voltage versions. |
| 5 | OUT | power_out | Output of the regulator, which has no output capacitor requirement for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 1.7 | 5.5 | V | 4 | ||
| Internal reference (TPS73101) | VFB | 1.198 | 1.2 | 1.21 | V | TA = 25°C | 4 |
| Nominal output voltage accuracy | VOUT | -0.5 | 0.5 | % | TA = 25°C | 4 | |
| Output voltage accuracy over VIN, IOUT and temperature | VOUT | -1 | 1 | % | VOUT + 0.5 V ≤ VIN ≤ 5.5 V, 10 mA ≤ IOUT ≤ 150 mA | 4 | |
| Dropout voltage | VDO | 30 | 100 | mV | IOUT = 150 mA (VIN = VOUT (nom), 0.1 V) | 4 | |
| Output current limit | ICL | 150 | 360 | 500 | mA | VOUT = 0.9 × VOUT(nom) | 4 |
| Ground pin current | IGND | 400 | 550 | μA | IOUT = 10 mA (IQ) | 4 | |
| Ground pin current | IGND | 550 | 750 | μA | IOUT = 150 mA | 4 | |
| Shutdown current (IGND) | ISHDN | 0.02 | 1 | μA | VEN ≤ 0.5 V, VOUT ≤ VIN ≤ 5.5 V | 4 | |
| FB pin current (TPS73101) | IFB | 0.1 | 0.475 | μA | 4 | ||
| Enable high (enabled) | VEN(HI) | 1.7 | V | 4 | |||
| Enable low (shutdown) | VEN(LO) | 0 | 0.5 | V | 4 | ||
| Enable pin current (enabled) | IEN(HI) | 0.02 | 0.1 | μA | VEN = 5.5 V | 4 | |
| Operating ambient temperature | TA | -55 | 125 | °C | 4 | ||
| VIN range (absolute maximum) | VIN | -0.3 | 6 | V | over operating junction temperature range | 3 | |
| VEN range (absolute maximum) | VEN | -0.3 | 6 | V | over operating junction temperature range | 3 | |
| VOUT range (absolute maximum) | VOUT | -0.3 | 5.5 | V | over operating junction temperature range | 3 | |
| Ambient temperature range (absolute maximum) | TA | -55 | 150 | °C | 3 | ||
| Storage temperature range | -65 | 150 | °C | 3 | |||
| ESD rating, HBM | 2 | kV | 3 | ||||
| ESD rating, CDM | 500 | V | 3 | ||||
| Junction-to-ambient thermal resistance (DBV, Low-K board) | RθJA | 255 | °C/W | JEDEC Low-K (1s) board | 3 | ||
| Junction-to-ambient thermal resistance (DBV, High-K board) | RθJA | 180 | °C/W | JEDEC High-K (2s2p) board | 3 | ||
| Junction-to-case thermal resistance (DBV) | RθJC | 64 | °C/W | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | out of the IN pin due to voltage applied on the OUT boards are shown in the Power Dissipation Ratings pin. There is additional current flowing into the OUT table. Using heavier copper increases the | 15 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TPS73101MDBVREP - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps73101mdbvrep-etched.step/tps73101mdbvrep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps73101mdbvrep.step/tps73101mdbvrep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
91a072e675b121ff, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).