main
Ray
Publish 0.1.0
9d0ad69
TPS72116DBVR
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5
TPS72116DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply voltage; the datasheet specifies VIN from 1.8 V to 5.5 V, with absolute maximum -0.3 V to 7 V. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | EN | input | Enable input: a logic high (VIH minimum 1.4 V) turns the regulator on and a logic low (VIL maximum 0.4 V) shuts the output off, with absolute maximum -0.3 V to 7 V. |
| 4 | NC/FB | unconnected | Not connected on the fixed-output TPS72116 (FB is the feedback pin only on the adjustable TPS72101) and must be left floating, not connected to GND. |
| 5 | OUT | power_out | Regulated output voltage; for the TPS72116 it is 1.6 V nominal (1.552 V to 1.648 V over 0 µA to 150 mA), with output current limited to 150 mA continuous. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 1.8 | 5.5 | V | Minimum IN operating voltage is 1.8 V or VOUT + VDO, whichever is greater | 3 | |
| Continuous output current | IOUT | 0 | 150 | mA | 3 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Output voltage | VOUT | 1.552 | 1.648 | V | TPS72116, 0 µA < IOUT < 150 mA, 2.6 V ≤ VIN ≤ 5.5 V | 3 | |
| Output voltage | VOUT | 1.6 | V | TPS72116, TJ = 25°C | 3 | ||
| Quiescent current (GND current) | IQ | 85 | 120 | µA | TJ = 25°C typ; max over temperature | 3 | |
| Quiescent current at full load | IQ | 570 | 850 | µA | IOUT = 150 mA, TJ = 25°C typ | 3 | |
| Standby current | 0.01 | 1 | µA | EN < 0.5 V, TJ = 25°C typ | 3 | ||
| Current limit | 175 | 525 | mA | Test condition includes output voltage VO = 1 V and pulse duration = 10 mS | 3 | ||
| Output voltage line regulation | ΔVOUT/VOUT | 0.03 | 0.09 | %/V | TJ = 25°C, VO + 1 V < VIN ≤ 2.5 V | 3 | |
| EN high level input | VIH | 1.4 | V | 3 | |||
| EN low level input | VIL | -0.2 | 0.4 | V | 3 | ||
| Reference voltage | Vref | 1.225 | V | TJ = 25°C | 3 | ||
| Ripple rejection | PSRR | 48 | dB | f = 100 Hz, Co = 10 µF, IOUT = 150 mA, TJ = 25°C | 3 | ||
| Thermal shutdown temperature | 170 | °C | 3 | ||||
| Thermal shutdown hysteresis | 20 | °C | 3 | ||||
| Voltage range at IN | -0.3 | 7 | V | 2 | |||
| Voltage range at EN | -0.3 | 7 | V | 2 | |||
| Voltage on OUT, FB, NC | -0.3 | V | max is VI + 0.3 V | 2 | |||
| ESD rating, HBM | 3 | kV | 2 | ||||
| Operating junction temperature range | TJ | -40 | 150 | °C | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Thermal resistance junction-to-case | RΘJC | 65.8 | °C/W | DBV package | 2 | ||
| Thermal resistance junction-to-ambient, Low-K | RΘJA | 259 | °C/W | Low-K board, DBV | 2 | ||
| Thermal resistance junction-to-ambient, High-K | RΘJA | 180 | °C/W | High-K board, DBV | 2 | ||
| EN input current | II | -0.01 | µA | EN = 0 V | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TPS72116DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps72116dbvr-etched.step/tps72116dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps72116dbvr.step/tps72116dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (17 pp, sha256
aa610b678cccff29, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# TPS72116DBVR
**Texas Instruments** · Linear Voltage Regulators (LDO) · SOT-23-5
TPS72116DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply voltage; the datasheet specifies VIN from 1.8 V to 5.5 V, with absolute maximum -0.3 V to 7 V. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | EN | input | Enable input: a logic high (VIH minimum 1.4 V) turns the regulator on and a logic low (VIL maximum 0.4 V) shuts the output off, with absolute maximum -0.3 V to 7 V. |
| 4 | NC/FB | unconnected | Not connected on the fixed-output TPS72116 (FB is the feedback pin only on the adjustable TPS72101) and must be left floating, not connected to GND. |
| 5 | OUT | power_out | Regulated output voltage; for the TPS72116 it is 1.6 V nominal (1.552 V to 1.648 V over 0 µA to 150 mA), with output current limited to 150 mA continuous. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 1.8 | | 5.5 | V | Minimum IN operating voltage is 1.8 V or VOUT + VDO, whichever is greater | 3 |
| Continuous output current | IOUT | 0 | | 150 | mA | | 3 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 3 |
| Output voltage | VOUT | 1.552 | | 1.648 | V | TPS72116, 0 µA < IOUT < 150 mA, 2.6 V ≤ VIN ≤ 5.5 V | 3 |
| Output voltage | VOUT | | 1.6 | | V | TPS72116, TJ = 25°C | 3 |
| Quiescent current (GND current) | IQ | | 85 | 120 | µA | TJ = 25°C typ; max over temperature | 3 |
| Quiescent current at full load | IQ | | 570 | 850 | µA | IOUT = 150 mA, TJ = 25°C typ | 3 |
| Standby current | | | 0.01 | 1 | µA | EN < 0.5 V, TJ = 25°C typ | 3 |
| Current limit | | 175 | | 525 | mA | Test condition includes output voltage VO = 1 V and pulse duration = 10 mS | 3 |
| Output voltage line regulation | ΔVOUT/VOUT | | 0.03 | 0.09 | %/V | TJ = 25°C, VO + 1 V < VIN ≤ 2.5 V | 3 |
| EN high level input | VIH | 1.4 | | | V | | 3 |
| EN low level input | VIL | -0.2 | | 0.4 | V | | 3 |
| Reference voltage | Vref | | 1.225 | | V | TJ = 25°C | 3 |
| Ripple rejection | PSRR | | 48 | | dB | f = 100 Hz, Co = 10 µF, IOUT = 150 mA, TJ = 25°C | 3 |
| Thermal shutdown temperature | | | 170 | | °C | | 3 |
| Thermal shutdown hysteresis | | | 20 | | °C | | 3 |
| Voltage range at IN | | -0.3 | | 7 | V | | 2 |
| Voltage range at EN | | -0.3 | | 7 | V | | 2 |
| Voltage on OUT, FB, NC | | -0.3 | | | V | max is VI + 0.3 V | 2 |
| ESD rating, HBM | | | | 3 | kV | | 2 |
| Operating junction temperature range | TJ | -40 | | 150 | °C | | 2 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 2 |
| Thermal resistance junction-to-case | RΘJC | | 65.8 | | °C/W | DBV package | 2 |
| Thermal resistance junction-to-ambient, Low-K | RΘJA | | 259 | | °C/W | Low-K board, DBV | 2 |
| Thermal resistance junction-to-ambient, High-K | RΘJA | | 180 | | °C/W | High-K board, DBV | 2 |
| EN input current | II | | -0.01 | | µA | EN = 0 V | 3 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `TPS72116DBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tps72116dbvr-etched.step` / `tps72116dbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps72116dbvr.step` / `tps72116dbvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps721.pdf) (17 pp, sha256 `aa610b678cccff29`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/tps72116dbvr-datasheet.pdf)