main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps72116dbvr: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tps72116dbvr-etched.glb tps72116dbvr: factory component page (tier=mfr) · Ray
tps72116dbvr-etched.step tps72116dbvr: factory component page (tier=mfr) · Ray
tps72116dbvr-hero.glb tps72116dbvr: hero GLB from the etched model (keeps the MPN mark) · Ray
tps72116dbvr-hero.overlay.json tps72116dbvr: hero GLB from the etched model (keeps the MPN mark) · Ray
tps72116dbvr.glb Publish 0.1.0 · Ray
tps72116dbvr.kicad_mod Publish 0.1.0 · Ray
tps72116dbvr.kicad_sym Publish 0.1.0 · Ray
tps72116dbvr.lbr Publish 0.1.0 · Ray
tps72116dbvr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

TPS72116DBVR

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

TPS72116DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN power_in Input supply voltage; the datasheet specifies VIN from 1.8 V to 5.5 V, with absolute maximum -0.3 V to 7 V.
2 GND power_in Ground reference pin for the regulator.
3 EN input Enable input: a logic high (VIH minimum 1.4 V) turns the regulator on and a logic low (VIL maximum 0.4 V) shuts the output off, with absolute maximum -0.3 V to 7 V.
4 NC/FB unconnected Not connected on the fixed-output TPS72116 (FB is the feedback pin only on the adjustable TPS72101) and must be left floating, not connected to GND.
5 OUT power_out Regulated output voltage; for the TPS72116 it is 1.6 V nominal (1.552 V to 1.648 V over 0 µA to 150 mA), with output current limited to 150 mA continuous.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN 1.8 5.5 V Minimum IN operating voltage is 1.8 V or VOUT + VDO, whichever is greater 3
Continuous output current IOUT 0 150 mA 3
Operating junction temperature TJ -40 125 °C 3
Output voltage VOUT 1.552 1.648 V TPS72116, 0 µA < IOUT < 150 mA, 2.6 V ≤ VIN ≤ 5.5 V 3
Output voltage VOUT 1.6 V TPS72116, TJ = 25°C 3
Quiescent current (GND current) IQ 85 120 µA TJ = 25°C typ; max over temperature 3
Quiescent current at full load IQ 570 850 µA IOUT = 150 mA, TJ = 25°C typ 3
Standby current 0.01 1 µA EN < 0.5 V, TJ = 25°C typ 3
Current limit 175 525 mA Test condition includes output voltage VO = 1 V and pulse duration = 10 mS 3
Output voltage line regulation ΔVOUT/VOUT 0.03 0.09 %/V TJ = 25°C, VO + 1 V < VIN ≤ 2.5 V 3
EN high level input VIH 1.4 V 3
EN low level input VIL -0.2 0.4 V 3
Reference voltage Vref 1.225 V TJ = 25°C 3
Ripple rejection PSRR 48 dB f = 100 Hz, Co = 10 µF, IOUT = 150 mA, TJ = 25°C 3
Thermal shutdown temperature 170 °C 3
Thermal shutdown hysteresis 20 °C 3
Voltage range at IN -0.3 7 V 2
Voltage range at EN -0.3 7 V 2
Voltage on OUT, FB, NC -0.3 V max is VI + 0.3 V 2
ESD rating, HBM 3 kV 2
Operating junction temperature range TJ -40 150 °C 2
Storage temperature range Tstg -65 150 °C 2
Thermal resistance junction-to-case RΘJC 65.8 °C/W DBV package 2
Thermal resistance junction-to-ambient, Low-K RΘJA 259 °C/W Low-K board, DBV 2
Thermal resistance junction-to-ambient, High-K RΘJA 180 °C/W High-K board, DBV 2
EN input current II -0.01 µA EN = 0 V 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS72116DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps72116dbvr-etched.step / tps72116dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps72116dbvr.step / tps72116dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (17 pp, sha256 aa610b678cccff29, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF